UPGRADE.DOC

Upgrading from v4.11 to v4.12


    Upgrading from 4.11 is sample, you can replace the following
    files with the new ones

        TM.EXE          the main program
        TM.OVL          the main program (overlay)
        TM.RES          the resource file
        TM.HLP          the help file

    There is no change in the configuration file format.
    Note: DO NOT change the version number in TM.CFG. It should read
          4.11 even you are running 4.12.



Upgrading from v3.xx and v4.00 to v4.12


    To upgrade from v3.xx and 4.00, you can replace the following files
    with the new ones

        TM.EXE          the main program
        TM.OVL          the main program (overlay)
        TM.RES          the resource file
        TM.HLP          the help file
        TMINST.EXE      the installation program
        HOST.SCR        the host script (inside HOST.EXE)
        HCONFIG.SCR     the host configuration script (inside HOST.EXE)

    Then run "UPGRADE TM.CFG" to upgrade your configuration file to the
    new format.

    The old script files (both *.SCR and *.TMS) are compatible with the
    new ones. However, a v4.11 script may not run correctly in an older
    version if the script contains the new "QUERY QUOTESTRING, ..." and
    "SET QUOTESTRING, ..." commands.

    If you want to use the GIFLink X/Y/Zmodem/QuickB protocol driver,
    you should also copy

        GIFLINK.EXE     the main GIFLink program
        GIFLINK.DOC     the document
        GKZ-U.BAT       the upload batch file for GIFLink's Zmodem
        GKZ-D.BAT       the download batch file for GIFLink's Zmodem
        GK-QB.BAT       the upload and download batch file for QuickB



Upgrading from v2.xx to v4.11


    This upgrade procesure assumes that you have Telemate already installed
    in the directory \TM,

    1. Before you do anything, MAKE A BACKUP of the \TM directory. You WILL
       NEED some files from it later.
    2. Copy all files (or extract them from the .ZIP) to \TM. You can
       overwrite all the files.
    3. Copy the TM.CFG from your backup to \TM and at the DOS prompt run
       "UPGRADE TM.CFG".
    4. Copy the TM.FON and TM.MEM from your backup to \TM.
    5. Delete all *.TMS files.
    6. Run TMINST.EXE to check if all the options are setup correctly.
    7. If you are using the HOST script, you can run HOST.EXE to extract
       the host script, copy the HUSER.HST from the backup to \TM and
       then run the script HCONFIG.SCR to setup the host mode.

    If you want to install v4.11 in a different directory, say C:\TM4,

    1. Copy all the files (or extract them from .ZIP) to C:\TM4.
    2. Copy the TM.CFG from \TM to C:\TM4 and at the DOS prompt run
       "UPGRADE TM.CFG".
    3. Edit TM.CFG and changes the lines to
           DirTelemate="C:\TM4\"
           DirScript="C:\TM4\"
       * It is VERY IMPORTANT that you have the directory set up correctly.
         Otherwise, Telemate will not run.
    4. Edit your AUTOEXEC.BAT and change (or add) the line
           SET TMCFG=C:\TM4\TM.CFG
    5. Copy the TM.FON and TM.MEM from \TM to C:\TM4.
    6. Run TMINST.EXE to check if all the options are setup correctly.

    Notes:
    1. The new *.MAC and *.PAD are not compatible with the old ones. You
       will have to set up your macro again.
    2. If you are using a 101-key keyboard, you should turn ON the 'Enhanced
       Keyboard' option under the Options/Mouse & Keyboard dialog.
    3. The VT102 keypad table is changed in order to emulate the actual
       terminal more accurately. Please refer to Appendix B in the file
       TELEMATE.DOC for details on the keyboard assignment.