Remington_870.pdf

Ow ner ’ s

Manual

MODEL 870 &

870 SUPER MAGNUM

PUMP ACTION SHOTGUNS

IMPORTANT!

READ ALL INSTRUCTIONS

AND WARNINGS IN THIS

BOOK BEFORE USING THE FIREARM.

PAGE 2........THE TEN COMMANDMENTS OF

FIREARM SAFETY

PAGE 7........IMPORTANT PARTS OF THE FIREARM

PAGE 10 ......HOW TO LOAD AND UNLOAD

PAGE 13 ......LUBRICATION AND MAINTENANCE

PAGE 15 ......HOW TO OBTAIN PARTS AND SERVICE

Ow ner ’ s

Manual

Instruction

Book for:

MODEL 870 &

870 SUPER MAGNUM

PUMP ACTION SHOTGUNS

Instruction

Book for:

A Tradition of Performance and Safety.

In 1816 Eliphalet Remington was confident he could make a flintlock that was as good or

better than any he could buy. His confidence was well founded. The barrel he handcrafted

set a new standard for firearm accuracy and spawned generations of products that have

made Remington ® Arms America’s leading gunmaker. While performance and style are

certainly hallmarks of Remington firearms, one factor ultimately drives their performance.

Safety. Eliphalet Remington never lost sight of the fact that his rifles were potentially

lethal and could kill someone if handled improperly. And after more than 180 years the

same holds true for any firearm, including your new Remington. Eliphalet Remington’s

first flintlock launched a proud tradition of accuracy and responsibility.

Eliphalet Remington’s first

flintlock launched a proud tradition

of accuracy & responsibility.

Safety is Critical to Performance.

A superbly crafted gun is only as good as the hands that hold it. You can never be too careful. Shooting

accidents are often caused by careless oversights such as failing to control the direction of the muzzle, failing to

fully engage the safety, leaving ammunition in the chamber or using improper loads. These oversights can result

in the destruction of life, limb or property. There’s no calling back a bullet once it’s been fired, so it’s

critical that you know the principles of safe gun handling and storage before you ever take your new Remington

firearm out of the box.

The proper use and performance of your firearm depends on correct assembly and maintenance, so it’s critical

that you familiarize yourself with the information in this instruction book. Even if you’re a veteran shooter with a

collection of Remington firearms, take the time to read this literature. Not all firearms are the same. That means

the first step in safe handling is to learn the features and requirements of your new Remington.

T HE T EN C OMMANDMENTS OF F IREARM S AFETY

The Ten Commandments of Firearm Safety should be etched in your memory forever. Let them govern your

action wherever and whenever you’re involved with firearms. In the field. On the range. Or in your home. Please

take the time to review and understand these rules.

1st COMMANDMENT

Always Keep the Muzzle Pointed in a Safe Direction.

This is the most important gun safety rule . A safe direction is one in which an accidental

discharge will not cause injury to yourself or others. Never allow your gun to point at

anything you don’t intend to shoot. Be especially careful when you’re loading or unloading.

Treat every gun as if it were loaded. And make it a habit to know where the muzzle is

pointed at all times, even when your firearm is unloaded. No one will be injured by an

accidental discharge if you keep your firearm pointed in a safe direction. It’s as simple as that.

2nd COMMANDMENT

Firearms Should be Unloaded When Not Actually in Use.

Load your firearm only when you’re in the field or on the target range and ready to fire. Never let a loaded gun

out of your sight or out of your hands. Unload it as soon as you’re finished shooting – before you bring it into

your car, camp or home. Remember, unloading your firearm means unloading it completely, so there is no

ammunition in the chamber or in the magazine. Before handling a firearm or passing it to someone else, visually

check the chamber, receiver and magazine to be certain they do not contain ammunition. Always keep the gun’s

action open when not in use. Never assume a gun is unloaded even if you were the last person to use it. Always

check for yourself.

Let common sense rule when you carry a loaded gun. If you’re in a situation that could risk

accidental discharge – such as crossing a fence, wading through a stream or climbing a

tree – always unload your gun. Never pull or push a loaded firearm toward yourself or

another person. And never carry a loaded gun in a scabbard, detached holster or gun case.

Certain firearms (including some Remington ® rifles and shotguns) are equipped with internal

security devices to prevent unauthorized use. In addition, some firearms owners use external

devices, such as cable locks and trigger blocks, for the same purpose. Even if you use such

a device, you should still keep your firearm unloaded when stored or not in use. And

using internal or external devices cannot substitute, however, for securing your firearms

and ammunition in a separate, locked location.

Safe storage of firearms is just as critical as safe handling. Never store guns loaded and

be sure to keep your firearms in a secure place where unauthorized persons cannot get

their hands on them without your knowledge.

Take special care if there are children around. Kids are fascinated by guns. It’s a natural curiosity that can have

tragic consequences when not properly supervised. Store your firearms in a locked gun safe or some other location

that physically bars a child from gaining access.

Ammunition should be stored and locked in a location separate from your firearm. Never leave an unsecured

firearm or ammunition in a closet, dresser drawer or under the bed. Remember, it is your responsibility to make

sure that children and others unfamiliar with firearms cannot gain access to your firearm and ammunition.

Firearms should be stored in a

secure place where children cannot

access them. A gun safe is an ideal

way to secure your firearm.

3rd COMMANDMENT

Don’t Rely on Your Gun’s Safety.

Treat every gun as if it can fire at any time, whether or not there’s pressure on the trigger. Your firearm has been

carefully designed to maximize performance and safety. However, because a gun’s safety is a mechanical device

that could fail.

Human error is a more likely reason for a gun safety to fail. By mistake, you may think the safety is on when it

really isn’t. Or the safety may have been disengaged without your knowledge. Or you could think your gun is

unloaded when there’s actually a cartridge or shell in it. A mechanical safety is not a substitute for common

sense. It’s merely a supplement to your proper handling of a firearm.

Never touch the trigger on a firearm until you are ready to shoot. Keep your fingers away from the trigger when

you’re loading or unloading. And don’t pull the trigger when the safety is engaged or positioned between safe

and fire.

Before using your gun , read this instruction book to understand the exact location and operation of your firearm’s

safety. Even when the safety is on, maintain control of your loaded firearm and control the direction of the

muzzle. In other words, don’t rely on your safety to justify careless handling. If your firearm’s internal

mechanisms are broken or have been altered, your firearm may fire even when the safety is on. Remember, you

and your safe gun-handling practices are your gun’s best safety.

4th COMMANDMENT

Be Sure of Your Target and What’s Beyond It.

You can’t stop a shot in mid-air , so never fire unless you know exactly

where your shot is going and what it will strike. Never fire at a sound,

a movement or a patch of color. A hunter in camouflage can easily be

mistaken for a target by an impulsive shooter. Before you pull the

trigger be absolutely sure of your target and what’s behind it. Make sure

the shot has a backstop such as a hillside or dense material like sand. Remember,

bullets can travel great distances with tremendous velocity. Know how far your shot will go

if you miss your target or the bullet ricochets.

5th COMMANDMENT

Use Proper Ammunition.

Every firearm is designed to use a certain caliber or gauge of ammunition. Using the wrong ammunition, mixing

ammunition or using improperly reloaded ammunition can cause serious personal injury or death. And it only

takes one cartridge or shotshell of the incorrect caliber or gauge, or which has been improperly reloaded, to

destroy your firearm. It’s your responsibility to make sure the ammunition you use exactly matches the caliber or

gauge of your gun. Refer to this instruction book to find out the specific requirements of your firearm. Always

read and heed the instructions on ammunition boxes.

Confusing shells or cartridges can cause serious personal injury or death and destroy your firearm. Examine

your shells or cartridges closely and use only the precise caliber or gauge for your specific firearm. For

example, suppose you accidentally loaded a 20 ga. shell into a 12 ga. shotgun. Because the 20 ga. shell is too

small for the chamber, the 20 ga. shell could travel down the barrel and get lodged in the bore. If you then loaded

a standard 12 ga. shell behind it and fired, the 12 ga. shot will slam into the lodged 20 ga. shell and may cause

the barrel to explode in your hand. This is commonly called a 12/20 burst, and it can kill you.

Check all ammunition before you load it to make sure it matches your gun’s requirements. Every Remington ®

cartridge and shell is head-stamped with its caliber or gauge for easy identification. Likewise, you’ll find the

caliber or gauge of your new Remington firearm imprinted on the barrel.

Reloading Requires Extra Diligence.

If you’re an ammunition reloader , you are responsible for personally assuring that the loads and components of

your reloaded ammunition meet your gun’s factory-tested standards. Never use ammunition which has been

reloaded by someone else!

Many shooters handload as a hobby or to save money on commercial, factory-made ammunition. However, it requires

a thorough knowledge of reloading procedures and a deep respect for the explosive potential of gunpowder.

Firearms are designed , manufactured and proof-tested to standards based on factory-loaded ammunition.

Handloaded or reloaded ammunition that deviates, either intentionally or accidentally, from load or component

recommendations can be very dangerous.

Reloaders must observe all possible safety precautions and practices related to the proper handling of explosives.

Whether you’re a seasoned reloader or just starting out, you should study the subject, watch reloading demonstrations

and talk to experienced reloaders.

The first rule of reloading is to always follow the manufacturer’s instructions for the components you’re using.

They’ll tell you to follow certain guidelines. Namely:

1. Don’t mix or substitute powders or primers.

2. Don’t use unknown or substandard components.

3. Use only suitable components that have been factory-tested

by reputable ammunition, powder and bullet manufacturers.

4. Always be sure to use the manufacturer’s recommended recipe when reloading.

Not following these guidelines could result in severe injury to yourself or severe damage to your firearm.

Dangerously high pressure and explosions can result from an overcharge of powder or other deviations from

established reloading guidelines. Be very careful. The process of reloading exposes you to environmentally

hazardous material. Lead, which is known to cause cancer and birth defects, is the most common substance

in bullets and shot. It is important to handle lead bullets and shot with extreme care. Work only in a well-

ventilated area and always wash your hands after exposure and before eating. Never smoke while reloading.

Primers and powders are also highly toxic and flammable. So after reloading be sure to clean up all materials

from your work area. Don’t leave primer or powder spills anywhere on the floor or bench top. Dispose of all waste

material in accordance with the manufacturer’s recommendations.

Finally, when reloading or handloading concentrate on what you’re doing at all times. Do not be distracted by

talking to others, listening to the radio or watching TV while reloading. Never reload after consuming alcoholic

beverages or drugs of any kind. You are working with extremely hazardous materials and you can’t risk even a

few seconds of distraction. Remember, if you reload, you are the ammunition manufacturer and you are responsible

for the performance and safety of your reloaded ammunition.

6th COMMANDMENT

If Your Gun Fails to Fire When the Trigger is Pulled, Handle With Care.

If for some reason the ammunition doesn’t fire when you pull the trigger, stop and remember the 1st

Commandment of Firearm Safety – always keep the muzzle pointed in a safe direction. Keep your face away from

the breech, then put the safety on, carefully open the action, unload the firearm and dispose of the cartridge safely.

Remember that anytime there’s a shell in the chamber, your gun is loaded and ready to use. Even if you tried to

shoot and your gun didn’t fire, treat your firearm as if it could still discharge.

7th COMMANDMENT

Always Wear Eye and Ear Protection When Shooting.

Your sight and hearing risk injury from shooting and should be protected at all times.

Wear protective shooting glasses to guard against falling shot, clay target chips,

powder residue, ruptured cartridge cases and even twigs and branches in the field. Also

be sure to wear eye protection when you’re disassembling or cleaning a gun so that tensioned parts

(like springs) and cleaning solvents don’t come in contact with your eyes. Continued exposure to shooting noise

can permanently damage your hearing. On the range, where shooting volume is the loudest, be sure to use the

maximum protection of a headset. And learn to use ear protection in the field, especially in confined locations

like duck blinds.

8th COMMANDMENT

Be Sure the Barrel is Clear of Obstructions Before Shooting.

Before loading your gun , open the action and make sure there’s no ammunition in the chamber or magazine.

Check the barrel for any obstructions or debris. Even a small amount of snow, mud, excess lubricant or grease

in the bore can dangerously increase pressure and cause the barrel to bulge or burst when firing. Use a

cleaning rod and patch to wipe away anti-rust compounds or any other residues or obstructions in the barrel.

Never try to shoot out an obstruction by loading another shell and firing!

When firing , rely on your instincts. If the noise or recoil of your firearm seems weak, stop everything, unload

your firearm and be sure nothing is lodged in the barrel. Remember the 12/20 burst? That’s what can happen

when the barrel is obstructed. So always be sure you’re using the correct ammunition in your firearm and that

it’s free of obstructions.

9th COMMANDMENT

Don’t Alter or Modify Your Gun and Have it Serviced Regularly.

Your firearm has been designed to operate according to certain factory specifications. You’ll jeopardize your safety

and that of others around you by attempting to alter its trigger, mechanical safety or other mechanisms. So never

alter or modify your firearm in any way.

Like any mechanical device , a firearm is subject to wear. It must be maintained and

periodically serviced to assure optimum safety and performance. Only a qualified

service facility should service, repair or modify your Remington ® firearm. Consult

your instruction book for instructions on how to send your firearm to the factory or

for the location of the nearest Remington repair station.

Proper cleaning and lubrication are also important to firearm maintenance and are

necessary to assure accuracy, safety and reliability. Before cleaning, always make sure

that your gun is completely unloaded. And always clean the barrel from the chamber

end to the muzzle when possible.

Plik z chomika:

Inne pliki z tego folderu:

Inne foldery tego chomika: