back_to_school_robot_messenger_bag - instrukcja wykonania plecaka szkolnego.pdf - Plecaki - monb

Back to School Robot

Messenger Bag

by Adrienne Franklin

Pattern Level: Intermediate

Seam Allowances: Seam Allowance: 3/8"

used and has been added unless otherwise

noted. Press carefully step-by step. Read all

instructions before beginning.

Materials needed:

3 yards Robot Print

3/4 - yard Velcro 1 1/2" wide

1 1/2 - yards polyester fleece

2 packages extra wide double fold bias binding

Vanishing or washable fabric marker, matching thread

Cutting and Assembly:

1) Cut pieces as specified in figure 1. To round the corners as shown, place a small

soup can in the corner of the fabric and trace around it. Using a disappearing

fabric marker and ruler, mark quilting lines 2" apart on 1 front piece, 1 back

piece, 1 flap, and 1 side piece. To quilt these pieces, form a quilt "sandwich" by

placing the fleece between the 2 matching fabric pieces with wrong sides of the

fabric towards the fleece. Pin to hold while quilting. Starting at the center of each

piece quilt along the drawn lines.

2) To make a pattern for the handles use a copier or other method to enlarge the

handles until 1 square = 1" on the background grid. Cut 2 front handles and 2

back handles from the robot print. Cut 1 front handle and 1 back handle from the

fleece. Baste front fleece to the wrong side of 1 front handle piece and back fleece

to one back handle piece. Stitch remaining front handle to front handle with fleece

right sides facing leaving the small straight end open for turning. Clip curves and

turn right side out, press. Topstitch around outer edges. Repeat for remaining back

handle pieces. Baste front handle to out side of flap as shown in figure 2, keeping

raw edges together and placing top left edge of handle 1 1/8 " away from flap left

edge. Cut a 9" piece of Velcro. Sew the soft side of Velcro to the front strap

placing the end of the Velcro 1/2" from the curved end of the handle and

centering it on the handle. See figure 2a. Baste back handle to left side of bag

back, raw edges even, centering handle on back side edge. See figure 2b. Cut

hook side of Velcro into 4- 1 1/2" pieces and sew on back handle as shown

sewing the first piece 1/2" from curved end of handle and spacing the remaining

pieces 1 1/2" apart. You will have a small piece of hook Velcro left over.

3) Finish edges of flap by leaving the basted edge with the front handle free and

enclosing the remaining 3 edges with bias tape. See figure 2a.

4) Sew side panel to front and back pieces, right sides facing, making sure that the

basted back handle is caught in the seam. Clip curves as necessary. See figure 3.

Finish inner seams by encasing with bias binding.

5) Sew flap to back top edge of bag, raw edges together and right sides facing. Make

sure to center flap along back and while stitching make sure to catch front handle

in seam. See figure 4. Encase entire top edge of bag (including raw edges of flap

and front handle) with bias binding, folding over raw edge of binding and

overlapping at the end of the seam. See figure 4.

6) Cut a 14" piece of Velcro and sew the soft side to the inside of flap edge 1" from

long edge, see figure 5. Sew hook section to front of bag 1" from bottom edge.

Bag is finished, try on and adjust handle to fit.

While all possible care has been taken to ensure the accuracy of this pattern, we are not

responsible for printing errors or the way in which individual work varies.

www.CranstonVillage.com

back_to_school_robot_messenger_bag - instrukcja wykonania plecaka szkolnego.pdf

Plik z chomika:

Inne pliki z tego folderu:

Inne foldery tego chomika: