Garden Windmill.pdf
(
56 KB
)
Pobierz
Garden Windmill
Garden Windmill
MATERIALS:
•
1 sheet of good-one-side (paint grade) 3/4" plywood for the base and
tower
•
12' of 1x8 clear pine for the blades and decorative attachments
•
1 four inch "lazy susan" turntable so the top can rotate into the wind
•
1" dowel, about 6"long, for the shaft of the blades
BUILDING INSTRUCTIONS:
•
Cut the base from 3/4" ply into a hexagon 24" across the flats
•
Cut six pieces of ply about 6" high to form the skirt under the base
•
The tower is a tapering cone, 33" high, made from six pieces of plywood,
8" wide narrowing to 4" at the top
•
On top of this sits a box 6" on a side and 4" high which rotates on the
"lazy susan" turntable
•
The 1" dowel is inserted into a 1" hole drilled into one face of this box at a
slight angle above horizontal
•
Attached to this 1" dowel are the four blades, which can be made up of
thin pieces of clear pine ripped into 1/4" x3/8" x36" and glued together
and to a 3/4"x3/4" piece of pine which is inserted into the 1" dowel
Plik z chomika:
malgosia68
Inne pliki z tego folderu:
Bridge Superstructures.pdf
(13769 KB)
PLANS FOR AN 8ft gazebo.pdf
(73 KB)
picketfp.pdf
(152 KB)
gazebo.pdf
(84 KB)
Glider Swing(2).pdf
(259 KB)
Inne foldery tego chomika:
domki dla dzieci do zabawy
Domy drewniane,altany
Garaze,wiaty
GAZETKA_WIOSENNA_PROMOCJA_POLBRUK_2009[1]
katalog firmowy-domy drewniane
Zgłoś jeśli
naruszono regulamin