07_Altivar11_catalogue.pdf
(
2199 KB
)
Pobierz
Telemecanique
Altivar 11
<< Back
Catalogue
Altivar 11
variable speed drives for asynchronous motors
from 0.18 to 2.2 kW
Building a New Electric World
Variable speed drives
for asynchronous motors
Presentation
0
Altivar 11
1
2
3
4
5
6
7
8
60250-EN_Ver1.1.fm/2
Schneider Electric
Variable speed drives
for asynchronous motors
Presentation
(continued)
0
Altivar 11
Applications
The Altivar 11 is a frequency inverter for 3-phase squirrel cage asynchronous motors
rated between 0.18 kW and 2.2 kW.
There are three types of power supply:
@ 100 V to 120 V single phase,
@ 200 V to 240 V single phase,
@ 200 V to 230 V 3-phase.
The Altivar 11 incorporates specific features for local markets (Europe range,
America range, Asia range) and has functions suitable for the most common
applications, including:
@ horizontal materials handling (small conveyors, etc),
@ ventilation, pumping, access control, automatic doors,
@ special machines (mixers, washing machines, centrifuges, etc).
Functions
The main functions incorporated in the Altivar 11 drive are:
@ starting and speed control,
@ reversal of operation direction,
@ acceleration, deceleration, stopping,
@ motor and drive protection,
@ 2-wire/3-wire control,
@ 4 preset speeds,
@ saving the configuration in the drive,
@ d.c. injection on stopping,
@ ramp switching,
@ catching a spinning load,
@ local controls (Asia range only).
Several functions can be assigned to one logic input.
Standard versions
The Altivar 11 offer consists of 3 ranges de
sig
n
ed
for 3 different markets:
@
Europe range: ATV 11
L
U
LL
M2E
(items
,
)
1
2
R single phase 240 V power supply,
R positive logic operation,
R integrated class B EMC filter.
@
America range: ATV 11
L
U
LLLL
U
(items
,
,
,
)
R power supplies: 120 V single phase, 240 V single phase or 230 V 3-phase,
R positive logic operation,
R meets current requirement in standar
d NEC
1999 208 V.
@
Asia range: ATV 11
L
U
LLLL
A
(items
,
)
R power supplies: 120 V single phase, 240 V single phase or 230 V 3-phase,
R positive or negative logic operation,
R local controls: Run and Stop keys, and potentiometer.
1
2
3
4
5
6
Altivar 11 drives are supplied either with heatsink (items
,
,
) fo
r
no
r
ma
l
environments and ventilated enclosures, or on a base plate (items
,
,
)
for
mounting on a machine frame, when the size of the frame enables dissipation of the
heat.
Electromagnetic compatibility EMC
The incorporation of EMC filters in
AT V 11
L
U
LL
M2E
drives simplifies installation of
machines and provides an economical means of meeting C marking requirements.
ATV 11
L
U
LLLL
U
and
ATV 11
L
U
LLLL
A
drives are available without EMC filter. Filters
are available as an option for customer assembly, if conformity to EMC standards is
required.
1
3
5
2
4
6
Options
The drive only communicates, in point-to-point mode, with the following tools and
software:
@ PowerSuite advanced dialogue solution:
R powerSuite software workshop for configuring the drive (item
),
7
R powerSuite for Pocket PC (item ),
R converter for connecting a PC or a Pocket PC.
8
The following options can be used with the Altivar 11 drive:
@ braking module connected to the drive’s DC bus,
@ braking resistors, for dissipating the energy returned to the drive when the motor
is operating as a generator,
@ EMC radio interference input filters,
@ plates for mounting on % rail,
@ adaptor plate for replacing an Altivar 08 drive,
@ plate for EMC mounting, earthing the cable shielding.
Characteristics:
pages 60251/2 to 60251/5
References:
pages 60252/2 to 60252/5
Dimensions:
pages 60253/2 and 60253/3
Schemes:
pages 60254/2 and 60254/3
60250-EN_Ver1.1.fm/3
Schneider Electric
Variable speed drives
for asynchronous motors
Characteristics
0
Altivar 11
Environment
Conformity to standards
Altivar 11 drives have been developed to conform to the strictest international
standards and the recommendations relating to electrical industrial control devices
(IEC, EN), in particular:
EN 50178, EMC immunity and EMC conducted and radiated emissions.
EMC immunity
@ IEC/EN 61000-4-2 level 3
@ IEC/EN 61000-4-3 level 3
@ IEC/EN 61000-4-4 level 4
@ IEC/EN 61000-4-5 level 3 (power access)
@ IEC/EN 61800-3, environments 1 and 2
EMC conducted and radiated
emissions for drives:
All
@ IEC/EN 61800-3, environments: 2 (industrial supply) and 1 (public supply) restricted
distribution
ATV 11LU05M2E to
ATV 11LU18M2E
@ EN 55011, EN 55022 class B, 2 to 12 kHz for motor cable lengths
S 5 m and class A (group 1), 2 to 16 kHz for lengths S
10 m
ATV 11LU29M2E to
ATV 11LU41M2E
@ EN 55011, EN 55022 class B, 4 to 16 kHz for motor cable lengths
S 5 m and class A (group 1), 4 to 16 kHz for lengths S
10 m
ATV 11HU05M2E to
ATV 11HU41M2E
@ With additional EMC filter: EN 55011, EN 55022 class B, 2 to 16 kHz for motor
cable lengths S 20 m and class A (group 1), 2 to 16 kHz for lengths S 50 m
ATV 11HU05LLU to
ATV 11HU41LLU and
ATV 11HU05LLA to
ATV 11HU41LLA
@ With additional EMC filter: EN 55011, EN 55022 class B, 2 to 16 kHz for motor
cable lengths S 5 m and class A (group 1), 2 to 16 kHz for lengths S 20 m
C
marking
The drives bear C marking in accordance with the European low voltage directives
(73/23/EEC and 93/68/EEC) and EMC (89/336/EEC)
Product certification
UL, CSA, NOM 117 and C-TICK
Degree of protection
IP 20
Vibration resistance
Drive without % rail option
Conforming to IEC/EN 60068-2-6:
- 1.5 mm peak from 3 to 13 Hz
- 1 gn from 13 to 200 Hz
Shock resistance
15 gn for 11 ms conforming to IEC/EN 60068-2-27
5…93% without condensation or dripping water, conforming to IEC 60068-2-3
Ambient temperature
around the unit
Storage
°C
- 25…+ 65
Operation
°C
- 10…+ 40,
- 10…+ 50 : removing the protective cover from the top of the drive
Up to + 60 with current derating of 2.2% per °C above 50 °C
Maximum operating altitude
m
1000 without derating (above this, derate the current by 1% per additional 100 m)
Operating position
Maximum permanent angle in relation to the normal vertical
mounting position
Drive characteristics
Output frequency range
Hz
0…200
Switching frequency
kHz
2…16
Speed range
1…20
Transient overtorque
150% of the nominal motor torque
Braking torque
- 20% of the nominal motor torque without braking resistor at no-load with the
“deceleration ramp adaptation” function enabled
- 80% of the nominal motor torque with braking resistor (available as an option) at no-
load
- Up to 150% of the nominal motor torque with braking resistor (available as an option)
at high inertia
Maximum transient current
150% of the nominal drive current for 60 seconds
Voltage/frequency ratio
Sensorless flux vector control with PWM motor control signal
(1)
Factory-set for most constant torque applications
Frequency loop gain
Factory-set with the speed loop stability and gain
Possible correction for machines with high resistive torque or high inertia, or for
machines with fast cycles
Slip compensation
Factory-set, according to the rating of the drive (adjustment possible)
(1) Pulse width modulation
Presentation:
pages 60250/2 and 60250/3
References:
pages 60252/2 to 60252/5
Dimensions:
pages 60253/2 and 60253/3
Schemes:
pages 60254/2 and 60254/3
60251-en_Ver2.0.fm/2
Schneider Electric
Variable speed drives
for asynchronous motors
Characteristics
(continued)
0
Altivar 11
Electrical characteristics
Power supply
Voltage
V
200 - 15% to 240 + 10% single phase for ATV 11LULLM2L
200 - 15% to 230 + 15% 3-phase pour ATV 11LULLM3L
100 - 15% to 120 + 10% single phase for ATV 11LULLF1L
Frequency
Hz
50 ± 5% or 60 ± 5%
Isc
A
1000 (prospective short-circuit current at the connection point) for single phase
power supply
5000 (prospective short-circuit current at the connection point) for 3-phase power
supply
Output voltage
Maximum 3-phase voltage equal to:
- the line supply voltage for ATV 11LULLMLL
- double the line supply voltage for ATV 11LULLF1L
Maximum connection capacity
of the power supply, the motor
and the braking module
Drive ATV 11LU05LLL, U09LLL,
U12MLL, U18MLL
1.5 mm
2
(AWG 14)
Drive ATV 11L
U18F1L, U29LLL, U41LLL
4 mm
2
(AWG 10)
Max. length of motor cables
m
- 50, shielded cable
- 100, non-shielded cable
Electrical isolation
Electrical isolation between power and control (inputs, outputs, power supplies)
Available internal supplies
Short-circuit and overload protection:
- One + 5 V (0/+ 5%) supply for the reference potentiometer (2.2 to 10 k
), maximum
current 10 mA
- One + 15 V (± 15%) supply for the control inputs, maximum current 100 mA
Analog input AI1
1 configurable analog input
Max. sampling time: 20 ms, resolution 0.4%, linearity ± 5%:
- voltage 0-5 V (internal power supply only) or 0-10 V, impedance 40 k
- current 0-20 mA or 4-20 mA (without addition of a resistor), impedance 250
Logic inputs LI
4 assignable logic inputs, impedance 5 k
+ 15 V internal or 24 V external power supply (min. 11 V, max. 30 V).
Factory-set with 2-wire control in “transition” mode for machine safety, for Europe and
America ranges:
- LI1: forward
- LI2: reverse
- LI3/LI4: 4 preset speeds
- Local controls for the Asia range
Multiple assignment makes it possible to mix several functions on one input (example:
LI1 assigned to forward and preset speed 2
LI3 assigned to reverse and preset speed 3)
Positive logic
State 0 if < 5 V, state 1 if
11 V
Max. sampling time: 20 ms
Negative logic
Available by programming on the Asia range only
State 0 if > 11 V or logic input not wired, state 1 if < 5 V
Max. sampling time: 20 ms
DO output
Factory setting:
- 2 kHz PWM
(1)
open collector output. Can be used for electromagnetic
galvanometer
- Max. current 10 mA
- Output impedance 1 k
linearity ± 1%, max. sampling time 20 ms.
Assignable as logic output:
- Open collector logic output, output impedance 100
50mA max
- Internal voltage (see above, available internal supplies)
- External voltage 30 V max: 50 mA
Relay outputs (RA-RC)
1 protected relay logic output (contact open on fault).
Minimum switching capacity: 10 mA for A 24 V.
Maximum switching capacity:
@ On resistive load (cos
= 1 and L/R = 0 ms): 5 A for ? 250 V or A 30 V
@ On inductive load (cos
= 0.4 and L/R = 7 ms): 2 A for ? 250 V or A 30 V
Maximum I/O connection capacity
1.5 mm
2
(AWG 14)
Acceleration and deceleration ramps
Ramp profiles: linear from 0.1 to 99.9 s.
Automatic adaptation of deceleration ramp time if braking capacities exceeded,
possible inhibition of this adaptation (use of braking module).
Braking to a standstill
By d.c. injection: automatically to a standstill as soon as the frequency drops to zero.
Period adjustable from 0.1 to 30 s or continuous, current adjustable from 0 to 1.2 In
Main protection and safety features of the drive
@ Thermal protection against overheating
@ Protection against short-circuits between output phases
@ Protection against overcurrent between output phases and earth, at power-up only
@ Line supply overvoltage and undervoltage safety circuits
@ Line supply phase loss safety function, for 3-phase supply.
Motor protection
Thermal protection integrated in the drive by continuous calculation of the l
2
t.
Thermal memory reset on power down.
Insulation resistance to earth
M
> 500 (electrical isolation)
Frequency resolution
Display units: 0.1 Hz
Analog inputs: 0.1 Hz for 200 Hz max.
Time constant for reference change
ms
5
(1) Pulse width modulation
Presentation:
pages 60250/2 and 60250/3
References:
pages 60252/2 to 60252/5
Dimensions:
pages 60253/2 and 60253/3
Schemes:
pages 60254/2 and 60254/3
60251-en_Ver2.0.fm/3
Schneider Electric
Plik z chomika:
Qulakin
Inne pliki z tego folderu:
01_HARMONY_CONTROL_AND_SIGNALLING.pdf
(14262 KB)
02_PHASEO_POWER_SUPP_AND_TRANSF_CAT.pdf
(329 KB)
02_PHASEO_POWER_SUPPLIES_CATALOGUE.pdf
(229 KB)
02_ZELIO_CONTROL_CATALOGUE.pdf
(525 KB)
02_ZELIO_LOGIC_CATALOGUE.pdf
(1119 KB)
Inne foldery tego chomika:
LV
srednie napiecie
Zgłoś jeśli
naruszono regulamin