Vision 230-260 Hardware Manual V200.pdf

User Gui

Vision 230 TM

Vision 260 TM

V200-21-G20

No part of this document may be used for any purpose other than

for the purposes specifically indicated herein nor may it be

reproduced or transmitted in any form or by any means,

electronic or mechanical, including photocopying and/or

recording, for any purpose without written permission from

Unitronics.

The information appearing in this document is for general

purposes only. Unitronics makes no warranty of any kind with

regard to the information appearing in this document, including,

but not limited to, implied warranties of merchantability and/or

fitness for a particular use or purpose. Unitronics assumes no

responsibility for the results, direct and/or indirect, of any misuse

of the information appearing in this document nor for any use of

the Unitronics products referred to herein in any manner

deviating from the recommendations made in this document.

Unitronics assumes no responsibility for the use of any parts,

components, or other ancillary appliances including circuitry other

than as recommended hereunder or other than that embodied in

the Unitronics product.

Unitronics retains all rights to its proprietary assets including, but

not limited to its software products which are copyrighted and

shall remain the property of Unitronics. Copyright protection

claimed includes all Forms and matters of copyrightable materials

and information legally allowed including but not limited to

material generated from the software programs which are

displayed on the screen of the Unitronics products such as styles,

templates, icons, screen displays, looks, etc. Duplication and/or

any unauthorized use thereof are strictly prohibited without prior

written permission from Unitronics.

All brand or product names are used for identification purpose

only and may be trademarks or registered trademarks of their

respective holders.

Unitronics reserves the right to revise this publication from time to

time and to amend its contents and related hardware and

software at any time. Technical updates (if any) may be included

in subsequent editions (if any).

Preface

This guide contains essential information for Vision OPLC™ users. Note that illustrations

showing the Vision230 (V230) also refer to the model Vision260 (V260), except where

specified.

Warnings and Safety Guidelines

Read this section carefully before installing and operating the device.

Chapter 1: Overview

Contains a general description of the device’s features and functions.

Chapter 2: Mounting

Describes mounting considerations and procedures.

Chapter 3: Power Supply

Explains wiring procedures and considerations.

Chapter 4: I/Os

Presents I/O options; shows how to attach a Snap-in I/O Module.

Chapter 5: Communications

Contains program download instructions as well as information on RS232 communications

and CANbus networking, including wiring.

Chapter 6: Information Mode

Describes how to use Information Mode to view runtime values, set timer values, reset and

initialize the controller and check I/O module status.

Chapter 7: Operating Panel Options

Explains how to adjust the LCD contrast, and how to use slides to label keys.

Appendix A: System Data Types

Contains tables showing internal system elements.

Appendix B: Technical Specifications

Provides detailed technical specifications.

Appendix C: New PLC Users

Provides information for new PLC users.

Plik z chomika:

Inne pliki z tego folderu:

Inne foldery tego chomika: