9-Pin Modem Data Splitter Model 9PMDS.pdf
(
71 KB
)
Pobierz
2595DS.DOC
9PMDS2595 - pg. 1/1
9-Pin Modem Data Splitter
Model 9PMDS
Document No. 9PMDS2595
The Modem Data Splitter is a device that can connect two computers or terminals to one modem without
switching. The modem data splitter can be used to combine two 9-pin DTE ports to one 9-pin DCE port.
All signals entering the female DCE connectors on pin 3 (Transmit Data), pin 4 (Data Terminal Ready), and pin 7
(Request to Send) are diode OR'd together and appear as outputs on the male DTE connector. Pin 1 (Carrier Detect), pin
2 (Receive Data), pin 6 (Data Set Ready), and pin 8 (Clear to Send) are all signals entering the male DTE connector and
are connected straight through as outputs on the two female DCE connectors. Signal Ground is connected straight through
to all ports on pin 5.
To install the Modem Data Splitter, a straight through 9-pin to 9-pin cable can be used from the computer or
terminal to the female 9-pin DCE connectors. Connect the male 9-pin DTE connector straight through to the modem. (B&B
model number 9PAMF6.) If your modem uses a DB-25 female connector, use a standard 9-pin to 25-pin adapter cable.
(B&B model number 232CAMS.)
The Modem Data Splitter does not require an external power source.
© B&B Electronics -- July 1994
Plik z chomika:
jimasek
Inne pliki z tego folderu:
RS-422 and RS-485 Application Note.pdf
(600 KB)
BREAKOUT II CABLE ADAPTOR Model 422BOC.pdf
(189 KB)
NMEA0183 to RS-232 RS-422 or RS-485 Model 183COR.pdf
(197 KB)
9-Pin Modem Data Splitter Model 9PMDS.pdf
(71 KB)
RS-232 to RS-232 Port Optical Isolator MODEL 232SPOP.pdf
(197 KB)
Inne foldery tego chomika:
AGD
e-book
ELEKTRONIKA
Gazety
KRÓTKOFALOWIEC
Zgłoś jeśli
naruszono regulamin