ZARYA montaż.pdf

(1087 KB) Pobierz

Zarya Assembling Manual

8/3/99 @ 11:59 PM Page 1 of 16

International

Space

Station

Paper

Model

June 1999 Version

Flights: 1A/R

STS 88 ISS 01-2A

Assembling

User Guide

Part 2: Zarya

Model Design: R. Fortezza

Assembling Drawings: G. De Chiara

NOTE:

This Model is a test version. It was built from scratch on the basis of photos published by NASA.

Please notify Raimondo Fortezza any error or discrepancy you could find during the assembly.

The e-mail address is: fortezza@marscenter.it

Detailed pictures are available at NASA WEB site at: station.nasa.gov. Please check these imag-

es before the assembly to control the correct positioning of each part.

The modifications will be implemented according to your suggestions. Please notify them via e-

mail. You will be kept informed when the updated version will be made available.

This model is free ware, and the idea is to develop the model 1:100 of the entire ISS.

If you want to support the initiative please send 10 US $, or even more if you like, to the

developer. Your name will be posted in the Supporter List published on the Paper-ISS page at

MARS WEB site and you can download all the updated version of the ISS with the new Modules

that will be launched up to the end of the year 2000.

Quality printed model is available based on uncompressed files and 1440 dpi ink-jet printer. The

cost is US $ 25 or an equivalent value in your currency. Send the money directly via mail to the

address indicated at page 9. The model is shipped using ordinary post service. If you want

express courier please send an e-mail for a quotation.

312613699.218.png

312613699.229.png

312613699.240.png

312613699.251.png

312613699.001.png

312613699.012.png

312613699.023.png

312613699.034.png

312613699.045.png

312613699.056.png

312613699.067.png

312613699.078.png

312613699.089.png

312613699.100.png

312613699.111.png

312613699.122.png

312613699.133.png

312613699.144.png

312613699.155.png

312613699.166.png

312613699.177.png

312613699.185.png

312613699.186.png

312613699.187.png

312613699.188.png

312613699.189.png

312613699.190.png

312613699.191.png

312613699.192.png

312613699.193.png

312613699.194.png

312613699.195.png

312613699.196.png

312613699.197.png

312613699.198.png

312613699.199.png

312613699.200.png

312613699.201.png

312613699.202.png

312613699.203.png

312613699.204.png

312613699.205.png

312613699.206.png

312613699.207.png

312613699.208.png

312613699.209.png

312613699.210.png

312613699.211.png

312613699.212.png

312613699.213.png

312613699.214.png

312613699.215.png

312613699.216.png

312613699.217.png

312613699.219.png

312613699.220.png

312613699.221.png

312613699.222.png

312613699.223.png

312613699.224.png

312613699.225.png

312613699.226.png

312613699.227.png

312613699.228.png

312613699.230.png

312613699.231.png

312613699.232.png

312613699.233.png

312613699.234.png

312613699.235.png

312613699.236.png

312613699.237.png

312613699.238.png

312613699.239.png

312613699.241.png

312613699.242.png

312613699.243.png

312613699.244.png

312613699.245.png

312613699.246.png

312613699.247.png

312613699.248.png

312613699.249.png

312613699.250.png

312613699.252.png

312613699.253.png

312613699.254.png

312613699.255.png

312613699.256.png

312613699.257.png

312613699.258.png

312613699.259.png

312613699.260.png

312613699.261.png

312613699.002.png

312613699.003.png

312613699.004.png

312613699.005.png

312613699.006.png

312613699.007.png

312613699.008.png

312613699.009.png

312613699.010.png

312613699.011.png

312613699.013.png

312613699.014.png

312613699.015.png

312613699.016.png

312613699.017.png

312613699.018.png

312613699.019.png

312613699.020.png

312613699.021.png

312613699.022.png

312613699.024.png

312613699.025.png

312613699.026.png

312613699.027.png

312613699.028.png

312613699.029.png

312613699.030.png

312613699.031.png

312613699.032.png

312613699.033.png

312613699.035.png

312613699.036.png

312613699.037.png

312613699.038.png

312613699.039.png

312613699.040.png

312613699.041.png

312613699.042.png

312613699.043.png

312613699.044.png

312613699.046.png

312613699.047.png

312613699.048.png

312613699.049.png

312613699.050.png

312613699.051.png

312613699.052.png

312613699.053.png

312613699.054.png

312613699.055.png

312613699.057.png

312613699.058.png

312613699.059.png

312613699.060.png

312613699.061.png

312613699.062.png

312613699.063.png

312613699.064.png

312613699.065.png

312613699.066.png

312613699.068.png

312613699.069.png

312613699.070.png

312613699.071.png

312613699.072.png

312613699.073.png

312613699.074.png

312613699.075.png

312613699.076.png

312613699.077.png

312613699.079.png

312613699.080.png

312613699.081.png

312613699.082.png

312613699.083.png

312613699.084.png

312613699.085.png

312613699.086.png

312613699.087.png

312613699.088.png

312613699.090.png

312613699.091.png

312613699.092.png

312613699.093.png

312613699.094.png

312613699.095.png

312613699.096.png

312613699.097.png

8/3/99 @ 11:59 PM Page 2 of 16

Zarya Assembling Guide

Cut out and bend the parts following the line. For best results use a sharp hobby knife and a

metal straight edge. For some parts small scissor is better. Glue together the parts using a thin,

even coat of ordinary white glue. Print the sheets on a color printer. The format of this model

should be compatible with both A-4 or US Letter sheet size. I used EPSON 750 Color ink-Jet

Printer with a resolution of 1440 dpi with excellent results.

Zarya is formed by three separate sheets. The first two should be printed on glossy paper. The

numbered parts belonging to this sheet are identified by the letter G followed by the part number.

The third sheet should be printed on card board paper (or Photo Paper) and its parts are identi-

fied by the label P

Cut the G-1 part. This is the

internal part of Zarya

structure.

Roll the G-1 part on a table edge and, once the

shape is similar to a cylinder, glue the tab and

form the Unity body.

To improve the model accuracy you can decide to cut the gluing tabs from any cylindri-

cal part and make a new separate one to eliminate the gap formed when a single part is

rolled and glued on itself. See the following sketch to understand the modification.

page 2

312613699.098.png

312613699.099.png

312613699.101.png

312613699.102.png

312613699.103.png

312613699.104.png

312613699.105.png

312613699.106.png

312613699.107.png

312613699.108.png

312613699.109.png

312613699.110.png

312613699.112.png

312613699.113.png

312613699.114.png

312613699.115.png

312613699.116.png

312613699.117.png

312613699.118.png

312613699.119.png

312613699.120.png

8/3/99 @ 11:59 PM Page 3 of 16

Cut the G-2 part and bend carefully the four U shaped structures. The

angles they should formed with the base is approximately the one shown

in the figure. Use a straight edge to bend along each line. Make a small

cut at the end of each line to easy the operation

Glue each box cover. Align carefully the two

edges and glue from the inner side.

Cut the nine P-3

parts. Glue them

inside each box.

The position

should corre-

spond to the line

marked on the

G-1 Tube. Bend

the two tabs at

each end at 90

degrees on the

opposite sides.

page 3

312613699.121.png

312613699.123.png

312613699.124.png

312613699.125.png

312613699.126.png

312613699.127.png

312613699.128.png

312613699.129.png

312613699.130.png

312613699.131.png

312613699.132.png

312613699.134.png

312613699.135.png

312613699.136.png

312613699.137.png

312613699.138.png

312613699.139.png

312613699.140.png

312613699.141.png

312613699.142.png

312613699.143.png

312613699.145.png

312613699.146.png

312613699.147.png

312613699.148.png

312613699.149.png

312613699.150.png

312613699.151.png

312613699.152.png

8/3/99 @ 11:59 PM Page 4 of 16

Cut G-4 part. Remove with a sharp razor the red

stripes. Roll it to form a cone.

Align the G-4 cone to the G-

1 tube. The black stripes

should be aligned to the cen-

ter-line of two opposite white

parts. The two sectors with

the yellow squares with two

dots (thruster) should be

aligned to the other white

bands.

Roll the G-2 part and glue it on the G-1

tube. The eight back tabs must be

inserted in the slot of the G-4 cone.

Glue the gray part of the tube one by

one and roll the G-2 part on the tube

carefully keeping the alignment on

each segment. Try the matching of the

G-1 and G-2 parts before to apply the

glue.

page 4

312613699.153.png

312613699.154.png

312613699.156.png

312613699.157.png

312613699.158.png

312613699.159.png

312613699.160.png

312613699.161.png

312613699.162.png

312613699.163.png

312613699.164.png

312613699.165.png

312613699.167.png

8/3/99 @ 11:59 PM Page 5 of 16

Glue the back tabs on the back

side of the G-4 cone.

Cut the P-5 disk. Insert it in the

cone and glue the tabs of the cone

on the disk.

The Tabs must be glued externally to the disk. Try to keep the

disc orthogonal to the center-line. The tabs should be bent with

care to form a perfect cone with flat base.

page 5

312613699.168.png

312613699.169.png

312613699.170.png

312613699.171.png

312613699.172.png

312613699.173.png

312613699.174.png

312613699.175.png

312613699.176.png

312613699.178.png

312613699.179.png

312613699.180.png

312613699.181.png

312613699.182.png

312613699.183.png

312613699.184.png

Plik z chomika:

Inne pliki z tego folderu:

98px-Unity-Zarya-Zvezda_STS-106.jpg (3 KB)
81px-S100e5958.jpg (3 KB)
180px-ISS_configuration_sep-2006_pl.png (16 KB)
150px-ISS_configuration_sep-2006_for_ISS_construction_sectio.png (10 KB)
120px-Sts111-711-005.jpg (4 KB)

Inne foldery tego chomika:

Zgłoś jeśli naruszono regulamin