MA603GBBT.PDF

SPECIFIC VEHICLE ALARM FITTING INSTRUCTIONS REV. 00

www.cobra.it

MAZDA

6 *

YEAR 03 ﬁ

PETROL

DIESEL

MAKE

MOD.

* Models with original equipment keyless entry system.

ALARM/SIREN

POSITION

Position the compact alarms and the sirens on the support of the shock absorber, passenger’s

side.

CENTRAL UNIT POSITION

Position the modular sistems and the modules under the dashboard, driver’s side.

POWER SUPPLY

+30: connect to the WHITE/RED wire located in the 24 way white connector, in the fuse box,

placed behind the driver’s side sill cover.

-31: connect with a cable terminal directly to the car body.

IGNITION WIRE

+15/54: connect to the RED/WHITE wire, in the 14 way grey connector, in the fuse box located

behind the driver’s side sill cover.

DIRECTION INDICATORS

Connect to the GREEN/WHITE and GREEN/ORANGE wires in the 24 way white connector, in

the fuse box, placed behind the driver’s side sill cover.

ELECTRIC WINDOWS

Positive control signal

Front window, driver’s side:

cut the RED wire in the 12 way white connector, directly in the push-buttons panel inside the

driver’s side door.

Front window, passenger’s side:

cut the GREEN/WHITE wire in the wiring harness coming out of the driver’s side door.

Rear window, driver’s side:

cut the the RED/GREEN wire in the wiring harness coming out of the driver’s side door.

Rear window, passenger’s side:

cut the BLUE/WHITE wire in the wiring harness coming out of the driver’s side door.

ACTIVAT./DEACTIVATION

Connections antitheft/vehicle

CONTROLS

Position

6 way white connector

24 way white connector

supply in the fuse box

car body

supply in the fuse box

The 6 way white connector is located in the upper part, on the right, behind the glove

compartment, passenger’s side. The 24 way white connector is located in the fuse box.

Refer to the A diagram in the dedicated installation manual.

Vehicle

RED/BLUE

RED/BLACK

GREEN/WHITE (Blk.)

Ground

ground

IMMOBILISATION POINT

Fuel pump

Cut the GREEN/RED wire in the 8 way white connector located in the lower part, on the right

of the fuse box, driver’s side.

STARTER

+50: Cut the BLACK/BLUE wire located in the wiring harness coming out of the connector of

the ignition key.

BONNET SWITCH

Install an additional switch on the headlamp support plate, driver’s side.

DOORS SWITCH

Connect to the GREEN/ORANGE wire located on the upright support, driver’s side.

BOOT SWITCH

Connect to the BROWN wire in the wiring harness located in the driver’s side base knob.

Note: This information is not binding, therefore it must be considered only an example for installation purposes that must be executed

as per the instructions given on the product installation manual.

ma603gbbt.doc

Art.3800

YELLOW/BLACK

GREY/BLACK

VIOLET

ORANGE

VIOLET/WHITE

ORANGE/WHITE

Plik z chomika:

Inne pliki z tego folderu:

Inne foldery tego chomika: