SATELLITE 1700 SERIES(1).pdf

(3517 KB) Pobierz
1730cdt
FIELD REPLACEABLE UNIT DOCUMENTATION
Satellite
1700 Series
GENERAL INFORMATION
Tools Required for Proper
Disassembly and Reassembly:
1. Phillips Screwdriver (Size 1)
2. Flat head screwdriver (5mm)
3. Hex driver (5mm)
4. Case Separator
5. ESD Wrist Strap
6. ESD mats
7. Tweezers
Before attempting any of the following procedures,
make sure that the main battery and AC adaptor is
not connected to the unit and the environment in
which you are working on is protected from
Electro-Static Discharge(ESD).
TOSHIBA
TM
Tough Enough for Today’s World
49472364.056.png 49472364.067.png 49472364.078.png 49472364.088.png 49472364.001.png 49472364.007.png 49472364.008.png 49472364.009.png 49472364.010.png 49472364.011.png 49472364.012.png 49472364.013.png 49472364.014.png 49472364.015.png 49472364.016.png 49472364.017.png 49472364.018.png 49472364.019.png 49472364.020.png 49472364.021.png 49472364.022.png 49472364.023.png 49472364.024.png 49472364.025.png 49472364.026.png 49472364.027.png 49472364.028.png 49472364.029.png 49472364.030.png 49472364.031.png 49472364.032.png 49472364.033.png 49472364.034.png 49472364.035.png 49472364.036.png 49472364.037.png 49472364.038.png 49472364.039.png 49472364.040.png 49472364.041.png 49472364.042.png 49472364.043.png 49472364.044.png 49472364.045.png 49472364.046.png 49472364.047.png 49472364.048.png 49472364.049.png 49472364.050.png 49472364.051.png 49472364.052.png 49472364.053.png 49472364.054.png 49472364.055.png 49472364.057.png 49472364.058.png 49472364.059.png 49472364.060.png 49472364.061.png 49472364.062.png 49472364.063.png 49472364.064.png 49472364.065.png 49472364.066.png 49472364.068.png 49472364.069.png 49472364.070.png 49472364.071.png 49472364.072.png 49472364.073.png 49472364.074.png 49472364.075.png 49472364.076.png 49472364.077.png 49472364.079.png 49472364.080.png
FIELD REPLACEABLE UNIT DOCUMENTATION
Satellite
1700Series
TOSHIBA
Tough Enough for Today’s World.
TM
49472364.081.png
FIELD REPLACEABLE UNIT DOCUMENTATION
Satellite
TM
1700Series
BATTERY PACK REMOVAL
OPTIONAL PC CARD REMOVAL
Battery lock
Battery pack
Battery release lever
Eject button
PC card
1. Turn the computer upside down as shown.
2. Press the battery lock and slide the
battery release lever to the right and lift out the battery.
1. Pull out the eject button of the PC card to be
removed.
2. Press the eject button and remove the PC card .
NOTE : Before removing any PCMCIA device, make
sure it is “STOPPED” in the PC Card Manager.
MEMORY MODULE REMOVAL
KEYBOARD REMOVAL
M2x4 black
screws
Latch
Memory
cover
Memory
module
M2.5x3
black screws
Memory clips
Keyboard holder
1. Turn the computer upside down.
2. Remove two M2x4 black screws and remove the
memory cover .
3. Push the memory clips outward and pull the
memory module out of the connector on a
30 degree angle.
1. Open the display panel.
2. Remove two M2.5x3 black screws securing the
keyboard holder.
3. Unlatch the keyboard holder at the top of keyboard
starting from the left side.
TOSHIBA
Tough Enough for Today’s World
49472364.082.png 49472364.083.png 49472364.084.png 49472364.085.png 49472364.086.png
FIELD REPLACEABLE UNIT DOCUMENTATION
Satellite
TM
1700Series
KEYBOARD REMOVAL
Keyboard
M2.5x3 black screws
Keyboard
Keyboard cable
JP7
JP5
IPS cable
4. Remove four M2x4 black screws securing the
keyboard.
5. Set the keyboard as shown above.
6. Disconnect the keyboard cable from JP7 and
IPS cable from JP5 .
7. Lift out the keyboard .
TOP COVER REMOVAL
M2.5x10 black screw
M2.5x8
silver
screws
M2.5x12
black
screws
M2.5x18
black
screws
Lcd harness assy
M2.5x3 black screw
1. Remove two M2.5x8 silver screws and M2.5x12 black
screws securing the LCD assembly.
2. Remove one M2.5x3 black screw securing the
LCD harness assembly.
3. Disconnect the LCD harness assembly from the system
board.
4. Remove eight M2.5x18 black screws and one
M2.5x10 black screw securing the bottom cover.
TOSHIBA
Tough Enough for Today’s World
49472364.087.png 49472364.089.png 49472364.090.png 49472364.091.png 49472364.092.png 49472364.093.png 49472364.094.png 49472364.095.png 49472364.096.png
FIELD REPLACEABLE UNIT DOCUMENTATION
Satellite
TM
1700Series
TOP COVER REMOVAL
HDD REMOVAL
M2.5x3
black
screws
HDD assy
handle
LED cable
HDD assy
HDD
M2.5x8
silver
screws
JP4
Sound/IPS switch board
Top cover
M2.5x8 silver screw
5. Disconnect the sound/IPS switch board from JP4 on the
system board.
6. Disconnect the LED board cable from the LED board.
7. Remove four M2.5x8 silver screws and two M2.5x3
black screw securing the top cover assembly.
8 Remove the top cover.
1. Remove one M2.5x8 silver screw securing the
HDD assembly.
2. Grasp the HDD assembly handle and pull it
in the direction of the arrow.
3. Lift out the HDD assembly .
.
HDD REMOVAL
FDD REMOVAL
M2.5x4 silver
screws
HDD bracket
JP6
M2.5x8
silver
screw
FDD
cable
HDD
FDD assembly
4. Remove four M2.5x3 silver screws securing the HDD
bracket.
5. Remove the HDD from the HDD bracket .
1. Remove one M2.5x8 silver screw securing the FDD
assembly.
2. Disconnect the FDD cable from JP6 .
3. Lift out the FDD assembly .
TOSHIBA
Tough Enough for Today’s World
49472364.097.png 49472364.098.png 49472364.002.png 49472364.003.png 49472364.004.png 49472364.005.png 49472364.006.png

Plik z chomika:

Inne pliki z tego folderu:

Inne foldery tego chomika:

Zgłoś jeśli naruszono regulamin