PS4 PS 4-141-MM1 h1266g.pdf

(962 KB) Pobierz
Hardware and Engineering
Hardware and Engineering
PS 4-141-MM1
PS 4-151-MM1
04/99 AWB 27-1266 GB
1st published 1996, edition 09/96
Revised edition 04/99
See modifications list on page II
© Moeller GmbH, Bonn
Author: Norbert Mausolf
Editor: Thomas Kracht
Translator: Terence Osborn
 
457264312.002.png
Caution!
Dangerous electrical voltage!
Before commencing the installation
Earth and short circuit.
Cover or enclose neighbouring units that
are live.
Follow the engineering instructions
(AWA) of the device concerned.
Only suitably qualified personnel may
work on this device/system.
Before installation and before touching
the device ensure that you are free of
electrostatic charge.
Ensure a reliable electrical isolation of
the low voltage for the 24 volt supply.
Only use power supply units complying
with IEC 60 364-4-41 or HD 384.4.41 S2.
Deviations of the mains voltage from the
rated value must not exceed the
tolerance limits given in the
specifications, otherwise this may cause
malfunction and dangerous operation.
Emergency stop devices complying with
IEC/EN 60 204-1 must be effective in all
operating modes of the automation
devices. Unlatching the emergency-stop
devices must not cause uncontrolled
operation or restart.
Devices that are designed for mounting
in housings or control cabinets must only
be operated and controlled after they
have been installed with the housing
closed. Desktop or portable units must
only be operated and controlled in
enclosed housings.
Measures should be taken to ensure the
proper restart of programs interrupted
after a voltage dip or failure. This should
not cause dangerous operating states
even for a short time. If necessary,
emergency-stop devices should be
implemented.
Connecting cables and signal lines
should be installed so that inductive or
capacitive interference do not impair the
automation functions.
Install automation devices and related
operating elements in such a way that
they are well protected against
unintentional operation.
Suitable safety hardware and software
measures should be implemented for
the I/O interface so that a line or wire
breakage on the signal side does not
result in undefined states in the
automation devices.
IBM is a registered trademark of International
Business Machines Corporation.
All other brand and product names are
trademarks or registered trademarks of the
owner concerned.
All rights reserved, including those of the
translation.
No part of this manual may be reproduced in
any form (printed, photocopy, microfilm or
any otherprocess) or processed, duplicated
or distributed by means of electronic
systems without written permission of
Moeller GmbH, Bonn.
Subject to alterations without notice.
Disconnect the power supply of the
device.
Ensure that the device cannot be
accidentally restarted.
Verify isolation from the supply.
457264312.003.png
List of revisions to AWB 27-1266 GB
Edition date
Page
Description
New
Modifica-
tion
Omitted
04/99
gen.
Sucosoft S 30-S4
AWB 27-1185/1186
5
Hardware and software requirements
45
Slave address
65
First instructions
65
Copying programs on Flash memory
81
EMC: RFI, Surge
II
457264312.004.png
Contents
About this Manual
3
Documentation for the PS4-150
3
Symbols
4
1 PS 4-150 Compact PLCs
5
Hardware and software requirements
5
Features
5
Setup
6
Elements
10
2 Engineering
17
Electromagnetic compatibility (EMC)
17
Connections
17
Programming device interface
20
Suconet K interface
22
Setting the bus terminating resistors
23
Arrangement of the control cabinet
23
Power supply
25
Interference protection
32
3Mouning
37
Mounting on a top-hat rail
37
Mounting on feet
38
4 Software configuration
39
General
39
Topology configuration procedure
40
Configuring and parameterizing stations
42
Configuration example
47
5Slave Addressing
53
Slaves for expanding remote I/O
53
Intelligent slaves
55
1
6Operaion
57
Power-up behaviour
57
Shutdown behaviour
57
Operating states of the PLC
58
Start behaviour
61
Program transfer
63
Starting the PLC with a program stored in
the memory module
65
Programming with Suconet K
65
7 Test/Commissioning/Diagnostics
67
Status LEDs
67
Diagnostics
68
Message byte
69
Appendix
71
Accessories
71
Slave addressing
72
Technical Data
75
Index
83
2
457264312.001.png

Plik z chomika:

Inne pliki z tego folderu:

Inne foldery tego chomika:

Zgłoś jeśli naruszono regulamin