DALLASRMD169.PDF
(
1621 KB
)
Pobierz
Radio / MD
Dallas RMD 169 US
Operating instructions
2
3
4
1
5
13
12
11
10
9
8
7
6
19
14
15
18
20
21
1
3
17
16
2
Contents
Condensed instructions ................ 4
Remote control RC 08 ................. 11
Important ...................................... 12
Read the following before using
the unit .................................................. 12
Traffic safety ......................................... 12
Installation ............................................. 12
Telephone mute .................................... 12
Accessories .......................................... 12
Guarantee ............................................. 12
International hotline .............................. 12
KeyCard anti-theft protection
system ........................................... 13
Switching on the unit ............................ 13
Removing the KeyCard ........................ 13
Teaching in a second KeyCard/
replacing a KeyCard ............................. 13
Displaying the radio passport data ....... 14
Visual display for anti-theft
protection .............................................. 14
Care of the KeyCard ............................. 14
KeyCard lost/damaged ......................... 14
Teaching in the new KeyCard .............. 14
Input errors ........................................ 14
Selecting the operating mode .... 15
Enhancing display legibility ....... 15
Radio operation with RDS ........... 16
Activating/deactivating RDS ................. 16
AF - alternative frequency .................... 16
Selecting the frequency band ............... 16
Station tuning ........................................ 17
Paging through the transmission chains
(FM only) ............................................... 17
Changing the memory level (FM) ......... 17
Storing stations ..................................... 17
Automatically saving the strongest
station with Travelstore ........................ 18
Calling up stored stations ..................... 18
Sampling stored stations with
Preset Scan .......................................... 18
Sampling stations with Radio Scan ...... 19
Changing the sampling time (Scan) ..... 19
Changing the sensitivity of the
seek run ................................................ 19
Toggling between stereo and mono
(FM) ...................................................... 19
Automatic bandwidth switching
(SHARX) ............................................... 19
PTY – Program Type ............................ 20
Program type ........................................ 20
MiniDisc mode/
CD changer mode ........................ 22
Inserting a MiniDisc .............................. 22
Removing the MiniDisc ......................... 22
Activating MiniDisc mode ..................... 22
MD text .................................................. 22
Activating/deactivating MD text ............ 22
Displaying the MD text .......................... 22
Activating CD changer mode ................ 23
Selecting the display type ..................... 23
Selecting tracks and CDs ..................... 23
Repeating tracks and CDs ................... 23
TPM (Track Program Memory) ............. 24
MIX ........................................................ 24
SCAN .................................................... 25
Assigning a name to CDs ..................... 25
Deleting the CD name/TPM store using
DSC-UPDATE ...................................... 25
Clock - Time .................................. 26
Setting the time ..................................... 26
Displaying the time ............................... 26
Correcting the time following an
interruption to the power supply ........... 26
Deactivating hours adjustment ............. 26
Equalizer setting .......................... 27
Adjustment instructions ........................ 27
Adjusting the frequency level ............ 27
Selecting a quality factor for the
bass or mid-range ............................. 28
Selecting the preset sound setting: ...... 28
Tips on adjusting the equalizer ......... 29
Programming with DSC ............... 30
Overview of the factory default settings
with DSC ............................................... 32
Technical data .............................. 32
Glossary of technical terms ....... 33
Installation and
connection instructions ............ 138
3
Condensed instructions
2
ON
Switching on the unit
Insert the KeyCard and press
ON
brief-
ly.
The unit is switched on in the last op-
erating mode selected and with the
previously selected volume.
Switching the unit on/off using the
KeyCard
Insert/remove the KeyCard to switch
the unit on and off.
Refer also to the description of the
KeyCard anti-theft system
@
in the
condensed instructions.
1
Disengaging the fold-down control
panel
Disengage the control panel to insert
or remove the KeyCard and CD.
To disengage the control panel, press
knob
1
: the control panel folds down.
The control panel cannot be removed,
nor should it be used a shelf.
To re-engage the control panel, push it
back into its original position (Arrow 3).
Switching on/off by the ignition
The unit may be connected up such
that it is switched on and off by the ve-
hicle ignition.
When the ignition is switched off, a
double beep reminds you to remove
the KeyCard before leaving the vehi-
cle.
Switching off the unit
Press
ON
for approx. 1 second.
The display can be adjusted for the de-
sired viewing angle in order to improve
legibility. Refer to “Improving the legi-
bility of the display” if necessary.
Switching on whilst the ignition is
off
With the ignition off (and the KeyCard
inserted), proceed as follows to oper-
ate the unit:
Press
ON
when the double beep
sounds.
The unit is switched on.
The unit switches itself off automatical-
ly after an hour’s use in order to pre-
vent the vehicle battery from running
down.
1
3
For safety reasons, the control
panel must always be engaged
whilst the vehicle is moving.
When leaving the vehicle, open the
control panel and remove the Key-
Card in order to prevent theft.
Switching the sound on/off
Press
ON
briefly. “MUTE” appears on
the display when the sound is switched
off.
To switch the sound back on again,
turn the volume knob
3
.
4
Condensed instructions
3
Adjusting the volume
Turn the knob to adjust the volume.
Menu level 1
Station keys and memory levels
Menu level 2
Adjusting radio functions
The selected value is shown on the
display. When switched on, the unit
plays at the preselected volume (ON
VOL).
ON VOL can be changed (refer to
“Programming with DSC – ON VOL”).
NEXT - FM
Switch between the memory levels
FM I, FM II, FM T.
NEXT - AM, AMT
Switch between the AM and AMT fre-
quency bands.
NEXT - FM
Switch between the memory levels
FM I, FM II, FM T.
NEXT - AM, AMT
Switch between the AM and AMT fre-
quency bands.
4
Softkeys/display
Softkey = key with variable function.
The functions shown in the display can
be selected.
ST1 - ST6
ST1- ST6 can be used on this menu
level to store radio stations on the FM
levels I, II and “T”.
You can store six stations each on the
AM and AMT bands.
Store station –
press one of the sta-
tion buttons ST1- ST6 until the station
can be heard again (beep).
Call up station –
select the frequency
band. On FM, select the memory level
using
NEXT
and press the appropriate
station key briefly.
BND
Select the frequency band and memo-
ry level (FM I, FM II, FM T, AM, AMT).
SCA - Scan
a) PTY is deactivated (logo is lit nor-
mally, not in reverse video)
Press
SCA
(Radio Scan) briefly –
“SCAN” appears in the display alter-
nately with the code of the sampled
station. All stations on the frequency
band which can be received are sam-
pled briefly.
Radio mode
In radio mode, use
TU
to toggle be-
tween menu level 1 and menu level 2.
The system automatically returns to
menu level 1 when no key has been
pressed for eight seconds.
5
Plik z chomika:
djronin
Inne pliki z tego folderu:
ACAPULCO_CR35.PDF
(1290 KB)
ACD2800.PDF
(944 KB)
ACD2900.PDF
(885 KB)
ACS2500.PDF
(801 KB)
ALASKA.PDF
(1008 KB)
Inne foldery tego chomika:
Zgłoś jeśli
naruszono regulamin