FOFOC02GBDT2S.PDF

SPECIFIC VEHICLE ALARM FITTING INSTRUCTIONS REV. 00

www.cobra.it

MAKE FORD

MOD. FOCUS* YEAR. 02 2 nd sem. ﬁ

PETROL

DIESEL

* Models with original equipment keyless

entry system.

ALARM/SIREN

POSITION

Position the compact alarms and the sirens on the support of the shock absorber, driver’s

side.

CENTRAL UNIT POSITION

Position the modular systems and the modules behind the fuse box, under the

dashboard, passenger’s side.

POWER SUPPLY

+ 30: connect to the 6 mm 2 RED wire located in a multiway connector in the fuse box.

- 31: connect to one of the ground terminals located on the left under the dashboard

driver’s side.

IGNITION WIRE

+ 15/54: connect to the GREY/ORANGE wire coming out of the ignition key.

DIRECTION INDICATORS

Connect to the BLUE wire, at the position nr. 3 (or as alternative to the nr.12) and to the

BLUE wire, at the position nr. 4 (or as alternative to the nr. 13) located in the light blue

connector, on the central locking unit, behind the passenger’s side glove compartment.

ELECTRIC WINDOWS

The windows locking is obtained using the original radio control.

ACTIVAT./DEACTIVATION

CONTROLS

Connections antitheft/vehicle

Art. 3800 Vehicle Position

YELLOW/BLACK YELLOW/BLACK pos. nr. 3, green connector

GREY/BLACK BLACK/WHITE pos. nr. 5, green connector

VIOLET BLACK/GREEN pos. nr.16, green connector

ORANGE positive supply in the fuse box

VIOLET/WHITE ground car body

ORANGE/WHITE positive supply in the fuse box

Refer to the B diagram of the dedicated installations manual located in the kit of the

antitheft.

Note: the green connector is located on the GEM central unit behind the driver’s side

glove compartment.

IMMOBILISATION POINT

Gasoil pump

Cut the GREEN/BLACK wire located at the position nr. 3, in the 8 way white connector,

fitted on the fuses box.

STARTER

+50: Cut the 2,5 mm 2 GREY wire located in a multiway connector, in the fuse box.

BONNET SWITCH

Install an additional switch on the headlamp support plate, driver’s side.

DOORS SWITCH

Perimetric connection with separated lines

onnect to the BLACK/YELLOW wire in the white connector for the driver’s side front door,

to the BLACK/BLUE wire in the white connector for the passenger’s side front door, to the

BLACK/ORANGE wire in the green connector for the driver’s side rear door and to the

BLACK/GREEN wire in the grey connector for the passenger’s side rear door.

The connectors are located on the central locking, behind the passenger’s side glove

compartment.

Perimetric connection directly to the ceiling lamp control

Connect to the BLACK/BLUE wire at the position nr. 3, in the dark grey connector, coming

out of the central of the central locking unit located behind the passenger’s side glove

compartment.

BOOT SWITCH

Connect to the BLACK/YELLOW wire, in the brown connector coming out of the central

locking unit located behind the passenger’s side glove compartment.

Note: This information is not binding, therefore it must be considered only an example for installation purposes that must be executed

as per the instructions given on the product installation manual.

fofoc02gbdt2s.doc

Plik z chomika:

Inne pliki z tego folderu:

Inne foldery tego chomika: