FIMUL01GBBT.PDF

SPECIFIC VEHICLE ALARM FITTING INSTRUCTIONS REV. 00

www.cobra.it

FIAT

MOD. MULTIPLA* YEAR. 01 ﬁ

PETROL

DIESEL

MAKE

* Models with original equipment keyless entry system.

ALARM/SIREN

POSITION

Position the compact alarms and the sirens on the support of the servobrake in the engine

compartment.

CENTRAL UNIT POSITION

The modular systems and the modules should be positioned under the dashboard, driver’s

side.

POWER SUPPLY

+30: connect directly to the positive end of the battery.

-31: connect directly to the car body.

IGNITION WIRE

+15/54: Connect to the 0,5 mm 2 LIGHT BLUE/WHITE wire located in the 18 way white

connector,

DIRECTION INDICATORS

Connect to the LIGHT BLUE wire located in the 12 way white/brown connector and to the

LIGHT BLUE/BLACK wire located in the 14 way white/brown connector placed in the front

part of the fuse box.

ELECTRIC WINDOWS

Positive control signal

Front window, driver’s side:

cut the the GREY/BLACK wire located in the 18 way black located on the windows

automatism central on the side of the fuse box.

Front window, passenger’s side:

cut the YELLOW/BLUE wire located in the wiring harness coming out of the driver’s side

door.

ACTIVAT./DEACTIVATION

CONTROLS

Connections antitheft/vehicle

Art.3800 Vehicle Position

YELLOW/BLACK PIN nr. 1 in the connector coming out of the central

GREY/BLACK +30 standing positive in the fuse box

VIOLET +30 standing positive in the fuse box

ORANGE +30 standing positive in the fuse box

VIOLET/WHITE +30 standing positive in the fuse box

ORANGE/WHITE +30 standing positive in the fuse box

The central is located behind the right lateral bulkhead, passenger’s side.

IMMOBILISATION POINT

Fuel pump

Cut the BROWN/WHITE wire located in the wiring harness coming out of the 14 way brown

connector located in the front part of the fuse box.

STARTER

+50: Cut the RED wire located in the wiring harness coming out of the 3 way white

connector of the ignition key.

BONNET SWITCH

Install an additional switch on the front headlamp support grill, driver’s side.

DOORS SWITCH

Connect to the GREY and GREY/BROWN wire located in the wiring harness coming out of

the 14 way brown connector located in the frontal part o the fuse box.

BOOT SWITCH

Connect to the GREY/ BROWN wire located in the wiring harness coming out of the 12 way

white connector placed in the left lateral part of the boot.

Note: This information is not binding, therefore it must be considered only an example for installation purposes that must be executed

as per the instructions given on the product installation manual.

fimul01gbbt.doc

Plik z chomika:

Inne pliki z tego folderu:

Inne foldery tego chomika: