MN 800 MicroNet Sereis Controller.EN.pdf
(
493 KB
)
Pobierz
TAC I/A Series
1
MN 800 Series Controllers
TAC I/A Series Micronet MN 800
The TAC I/A Series MicroNet MN 800 Series
Controllers are programmable, interoperable,
L
o n
W
o r k s
™ based control devices.
The MN 800 series controller features eight universal
inputs, four analog outputs, eight digital outputs, a
5.1 volt reference, LED indication, and support for
TAC MicroNet
MN-Sx Sensor Link (S-Link) sensors. Additionally,
network capability is provided through the use
of a FTT-10 transceiver allowing the controller
to communicate to other devices as part of a
L
o n
W
o r k s
Free Topology Communications network.
A direct connection to a WPA-LON WorkPlace
Communication adapter and a PC with WorkPlace
Tech Tool software is necessary to download and
modify applications.
SPECIFICATIONS
HArdwArE
Designed for new or existing systems, the MN 800
series controller may be used in large TAC I/A Series
MicroNet systems, as well as with stand alone
applications. When programmed using WorkPlace
Tech Tool or loaded with a previously designed
application, it provides control strategies for a wide
variety of mechanical equipment. Typical applications
include central station air handlers, VAV air handlers,
fan coil units, unit ventilators, and cooling towers.
dimensions
ENCL-MZ800-wAL
8.5 in. W x 10.875 in. H x 4.25 in. D
(216 mm x 266 mm x 104 mm)
ENCL-MZ800-PAN
8.5 in. W x 10.675 in. H x 4.125 in. D
(216 mm x 262 mm x 101 mm)
MNL-800-101
Not applicable; circuit board only.
Mounting
ENCL-MZ800-wAL
NEMA 1 location.
ENCL-MZ800-PAN
Control compartment of controlled equipment.
Microprocessor
SAF-C161, 10 MHz clock speed, 16-bit word size.
Memory
EPrOM 512 kbytes
rAM 128 kbytes
EEPrOM 32 kbytes
wiring Terminals
Screw terminals. Each terminal accepts one AWG
#14 to 22 (2.08 to 0.326 mm
2
) wire or up to two
AWG #18 to 22 (0.823 to 0.326 mm
2
) wires.
The WorkPlace Tech Tool software is used to
program the controllers or to download applications.
The MN 800 series controller offers the advantages
of standalone or networked control. Using a TAC
I/A Series MicroNet sensor (MN-Sx Series), the
operator can monitor controller performance and edit
operational values.
ENvIrONMENT
Operating Temperature
-40 to 140 °F (-40 to 60 °C)
Shipping and Storage Temperature
-40 to 160 °F (-40 to 71 °C)
Humidity
5 to 95% RH, non-condensing
Backup Clock/rAM
3 days (rechargeable) at 77 °F (25 °C).
Backed-up Time Clock
Accuracy +/-150 sec/mo at 77 °F (25 °C).
Speciications continued on next page.
ELECTrICAL
Power Supply Input
20.4 to 30 Vac, 50/60 Hz.
Maximum Power Consumption
20 VA at 24 Vac, 50/60 Hz.
Surge Immunity Compliance
IEEE C62.41 (IEEE-587, Category A & B).
TAC I/A Series
MN 800 Series Controllers
2
Speciications continued from irst page.
10K ohm Thermistor w/ 11K ohm Shunt resistor
-40 to 250 °F (-40 to 121 °C) range. TSMN-57011-
850, TS-5700-850 Series or equivalent.
1k resistance 0 to 1.5k ohms.
10k resistance 0 to 10.5k ohms.
Potentiometers 1K to 15K ohm resistance, using
5.1 V reference.
voltage 0 to 5 Vdc.
Current 0 to 20 mA requires an external 250 ohm
shunt resistor.
digital Input Dry Contact. Detection of closed
switch requires less than 300 ohms. Detection of
open switch requires more than 1.5K ohms.
AGENCY LISTINGS
US
FCC Part 15, Class A
UL 916, File #E71385 Category PAZX
Canadian
UL Listed to Canadian Safety Standards
(CAN/CSA 22.2)
Australian
Meets requirements to bear the C-Tick Mark
European Community- EMC directive
EN55022 (Emissions, Class A)
EN50081-1 (EMC, Immunity)
EN50082-1 (AC Mains Power Line Voltage)
COMMUNICATIONS
INPUTS ANd OUTPUTS
L
o n
W
o r k s
Networks
A L
o n
W
o r k s
communications network uses a
TP/FT-10 Free Topology coniguration. Controllers
on a L
o n
W
o r k s
network can communicate with each
other in a peer-to-peer fashion. A L
o n
W
o r k s
network
has a communications speed of 78 kbps, using
unshielded, twisted-pair cabling, with connections
that are not polarity sensitive.
S-Link
The Sensor Link (S-Link) communications wiring
provides power and a communication interface for an
MN-Sx MicroNet sensor. The various MN-Sx sensors
can provide room temperature, room humidity,
setpoint adjustment, and occupancy override. This
connection uses two-wire, unshielded cable and is
not polarity sensitive. Maximum wire length allowed
between a controller and a MicroNet Sensor is 200 ft
(61 m).
Pulse Count
IN1 Only
Minimum pulse count rate of 1 per 4 min.
Maximum pluse count rate of 10 per sec (50 msec
minimum On or Off time per pulse).
IN2-IN8
Minimum pulse count rate of 1 per 4 min.
Maximum pluse count rate of 1 per sec (0.5 sec
minimum On or Off time per pulse).
Analog Outputs
Quantity 4
Type 0-20 mA range programmable source into 80 to
550 ohm load, momentary short circuit protection.
Digital to Analog Conversion Resolution
8 bit.
digital Outputs
Quantity 8
Contact ratings 30 VA at 24 Vac, pilot duty. 120 VA
at 120 Vac, pilot duty.
Contact Type Form C (SPDT) isolated.
Status Indication Light emitting diode.
voltage reference 5.1 Vdc, 20 mA maximum.
Analog to digital Conversion resolution
12 bit.
Universal Inputs
Quantity 8
1K ohm Balco Input -40 to 250 °F (-40 to 121°C)
range. TSMN-81011, TS-8000 Series or equivalent.
1K ohm Platinum Input -40 to 240 °F (-40 to
116 °C) range. TSMN-58011, TS-5800 Series or
equivalent.
1K ohm Copper Input -31 to 240 °F (-35 to 116 °C)
range. TS-5600 Series or equivalent.
Schneider Electric 1354 Clifford Avenue, P.O. Box 2940, Loves Park, IL 61132-2940, USA 1-888-444-1311 www.schneider-electric.com/buildings
F-26627-5
November 2009
pm
TAC I/A Series
MN 800 Series Controllers
3
INPUTS FrOM MN-SX I/A SErIES MICrONET SENSOrS
Inputs
description
MN-Sx Sensor
Space Temperature
32 to 122 °F (0 to 50 °C)
MN-S1, MN-S1HT, MN-S2, MN-S2HT, MN-S3, MN-S3HT,
MN-S4, MN-S4HT, MN-S4-FCS, MN-S4HT-FCS, MN-S5
and MN-S5HT
Space Humidity
5 to 95% RH, Non-condensing
MN-S1HT, MN-S2HT, MN-S3HT, MN-S4HT, MN-S4HT-
FCS, and MN-S5HT
Adjustable Setpoint
40 to 95 °F (4 to 35°C)
MN-S3, MN-S3HT, MN-S4, MN-S4HT, MN-S4-FCS,
MN-S4HT-FCS, MN-S5, and MN-S5HT
Override Pushbutton
For standalone occupancy control or
remote status monitoring of local status
condition.
MN-S2, MN-S2HT, MN-S3, MN-S3HT, MN-S4, MN-S4HT,
MN-S5, and MN-S5HT
Fan Operation and Speed
Fan mode selection: On, Speed (Low/
Medium/High), or Auto.
MN-S4, MN-S4HT, MN-S4-FCS, MN-S4HT-FCS, MN-S5,
and MN-S5HT
System Mode
System mode selection: Heat, Cool, Off,
or Auto.
MN-S4, MN-S4HT, MN-S5, and MN-S5HT
Emergency Heat
Emergency heat mode selection: Enable
or Disable
MN-S5 and MN-S5HT
MOdELS
Part Number
description
Backed-up Time Clock
ENCL-MZ800-WAL
TAC I/A Series MicroNet 800 Series
Controller with Wall-Mount Enclosure
No
ENCL-MZ800-PAN
TAC I/A Series MicroNet 800 Series
Controller with Panel-Mount
Enclosure
No
MNL-800-101
TAC I/A Series MicroNet 800 Series
Controller Card
Yes
FEATUrES
Complete user creation of custom control
•
•
Capability to function in standalone mode or
strategies through TAC I/A Series WorkPlace
Tech Tool software adapts the MN 800 Series
Controller to virtually any HVAC control sequence
or mechanical system.
L
o n
W
o r k s
as part of a L
o n
W
o r k s
TP/FT-10 Free Topology
communications network.
Multiple controllers on a
•
L
o n
W
o r k s
FTT network
create a complex network of controllers for
virtually any building control need.
Provides basic trend of up to 24 points within
•
compatible applications are completely
programmable.
WorkPlace Tech Tool can be used to reconigure
•
•
the application. Trend maintains last 48 analog
samples or digital changes of state with time
stamp. Analog sampling adjustable time rates.
and edit application coniguration data to it a
wide range of control requirements.
Interoperability achieved using
•
L
o n
W
o r k s
Standard Network Variable Types (SNVTs).
Backed-up time clock provides true stand-alone
•
direct digital control with optimum start stop,
scheduling functions, and backed-up RAM.
Schneider Electric 1354 Clifford Avenue, P.O. Box 2940, Loves Park, IL 61132-2940, USA 1-888-444-1311 www.schneider-electric.com/buildings
F-26627-5
November 2009
pm
TAC I/A Series
MN 800 Series Controllers
4
ArCHITECTUrE
PDA
MicroNet Sensor
(MN-S5 Shown)
Universal
Network
Controller
Desktop PC or
Notebook PC with
WorkPlace Te ch
Tool Software
5
4
MNL-V3RVx
or MN 50
Controller
MN 100, MN 150, or
MN 200 Controller
1
2
MNL-CIM
MicroNet Controller
Interface Module
6
L
ON
W
ORKS
Network
Router
(if required)
3
MNL-V1RVx or
MNL-V2RVx
Controller
4
MN 110 or MN 130
Controller
MN 800
Controller
MicroNet Sensor
(MN-S3 Shown)
1
A PC can be connected to the L
ON
W
ORKS
TP/FT-10 Network, either directly or through the L
ON
W
ORKS
network jack of a
L
ON
W
ORKS
controller or MN-Sxxx Wall Sensor. The PC must have an Echelon
™
L
ON
T
ALK
™
adapter card.
2
Programming any of the TAC I/A Series controllers, including the MN 800 Series, requires WorkPlace Tech Tool.
3
This controller is not suitable for exposed mounting on a wall or panel, or in any other easily accessible place due to the
possibility of personal contact with the high-voltage terminals. It must be mounted inside a suitable grounded metal enclosure.
4
MicroNet Sensors can be connected to any MN controller.
5
A PDA running the Pocket I/A interface software may be used to communicate with TAC I/A Series MicroNet controllers.
6
When routers are used, WP Te ch is able to communicate through them to any of the TAC I/A Series devices on the network.
MN 800
Controller
MicroNet Sensor
(MN-S5 Shown)
MN 100, MN 150, or
MN 200 Controller
MN 110 or MN 130
Controller
3
4
Desktop PC with TAC I/A Series
Enterprise Server
L
ON
W
ORKS
Network
6
Router
(if required)
Ethernet
Universal
Network
Controller
4
MicroNet Sensor
(MN-S3 Shown)
MNL-V3RVx
or MN 50
Controller
MNL-V1RVx or
MNL-V2RVx
Controller
Distributed, manufactured, and sold by Schneider Electric. I/A
Series trademarks are owned by Invensys Systems, Inc. and are
used on this product under master license from Invensys. Invensys
does not manufacture this product or provide any product warranty
or support. For service, support, and warranty information, contact
Schneider Electric.
On October 1st, 2009, TAC became the Buildings Business of its parent company Schneider Electric. This document reflects the visual identity of Schneider Electric, however there
remain references to TAC as a corporate brand in the body copy. As each document is updated, the body copy will be changed to reflect appropriate corporate brand changes.
All brand names, trademarks and registered trademarks are the property of their respective owners. Information contained within this document is subject to change without notice.
Schneider Electric 1354 Clifford Avenue, P.O. Box 2940, Loves Park, IL 61132-2940, USA 1-888-444-1311 www.schneider-electric.com/buildings
F-26627-5
November 2009
pm
Plik z chomika:
origator
Inne pliki z tego folderu:
ACX Series Access Controller.EN.pdf
(674 KB)
BACnet Supervisor.EN.pdf
(162 KB)
ENC 520 Series Enterprise Network Controller.EN.pdf
(309 KB)
ENS-1 Enterprise Network Server.EN.pdf
(191 KB)
IA Series - Andover Continuum CyberStation.EN.pdf
(943 KB)
Inne foldery tego chomika:
Deklaracje
Instrukcje_materialy_techniczne
Zgłoś jeśli
naruszono regulamin