Bates_House.pdf

(5439 KB) Pobierz
372910579 UNPDF
A
Please note that this project is not recommended for children. It requires a moderate degree of skill, and the use of a cutting blade, which is extremely dangerous.
When using cutting blades always use protective eyewear. This model was designed to be printed on Matte Paper Heavyweight, and the use of white glue is recommended.
Black dashed lines represent a mountain fold (a fold which point upward), and orange dashed lines represent a valley fold (the fold points downward). The orange dashed lines are
accompanied by a red “ + ” at each end. These are to be used as pin guides. Poke small holes at the “ + ”, flip the sheet over, and score between the holes for a clean valley fold.
Read the instructions and study the illustrations carefully before beginning.
Optional - Cut out windows (leaving the center rails). Build the window inserts and glue in place behind
each window and door opening. Note - “Mother” is in the front, top, left window.
Fold Guide
2A
2A
3A
7A
4A
3A
1A
7B
5B
Insert tabs through slots
and glue down tabs
5B
8A
Score and fold the edges of
5A, 2B and 2C as shown.
Apply a small amount of glue to bottom corners and
top edges of roof parts 6A and 6B.
Position roof parts so TABS ARE OUTSIDE (see inset)!
When roof is in position, glue down tabs.
Apply a small amount of glue to top corners and
top edges. Insert tabs through slots of 5A, 2B and 2C.
DO NOT GLUE DOWN TABS YET!
6B
6A
Apply a small amount
of glue to bottom
corners and edges.
2B
2C
Assemble roof parts 6A and 6B.
5A
6B
Apply a small amount of glue
to top corners and edges.
6A
TABS ARE OUTSIDE!
A free project from http://www.haunteddimensions.raykeim.com
372910579.035.png 372910579.036.png
Apply a small amount of glue to bottom
corners and top edges of tower roof 5C.
Position roof parts so
TABS ARE OUTSIDE (see inset)!
When roof is in position,
glue down tabs.
5C
B
4D
4D
4i
Assemble tower roof parts 5C and dormer 4D.
5C
TABS ARE OUTSIDE!
4C
8C
Insert tabs in slot
then glue down tabs.
8D
Apply glue to
tabs then insert.
4H
4B x 2
4F & 4G
8E
4F & 4G
4B
Attach beneath side door.
8B
4J
6C x 2
4J
Attach to side of porch.
6C
4B
6C
Completed Model
372910579.037.png
 
1 OF 9
1A
slots
"Mother" window
Porch
7B here
372910579.001.png 372910579.002.png 372910579.003.png 372910579.004.png 372910579.005.png 372910579.006.png 372910579.007.png 372910579.008.png 372910579.009.png 372910579.010.png 372910579.011.png 372910579.012.png 372910579.013.png 372910579.014.png
2 OF 9
slots
slots
slots
A free project from http://www.haunteddimensions.raykeim.com
372910579.015.png 372910579.016.png 372910579.017.png 372910579.018.png 372910579.019.png 372910579.020.png 372910579.021.png 372910579.022.png 372910579.023.png 372910579.024.png 372910579.025.png 372910579.026.png 372910579.027.png 372910579.028.png
3 OF 9
A free project from http://www.haunteddimensions.raykeim.com
372910579.029.png 372910579.030.png 372910579.031.png 372910579.032.png 372910579.033.png 372910579.034.png

Plik z chomika:

Inne pliki z tego folderu:

Inne foldery tego chomika:

Zgłoś jeśli naruszono regulamin