Ramki na Halloween.pdf

Frames Instructions

Your refrigerator or desk will be terroriffic with

these fun-to-make printable frames. Below you’ll

find two options for this project. Option 1

requires purchasing Magnet Sheet Paper for ink

jet printers. Option 2 can be done using house-

hold items.

Tips & Tricks:

• To select the proper print settings in Adobe

Acrobat, click Print; in the print dialog box, select

Properties; choose the appropriate paper type

and then select the highest print quality.

• We recommend that you run a test print on

regular paper to double check that you’re

printing on the correct side of the paper.

(If problems occur, check your printer manual for

additional printing instructions.)

Step 2: Dry

Let paper dry several minutes before handling.

Step 3: Cut

Cut along the dotted lines. (For best results, use

a sharp knife with a ruler as a guide.)

Step 4: Decorate!

Place the magnets onto your refrigerator or any

other metallic surface. (WARNING: Avoid placing

magnets on electronic devices such as televisions

and DVD players. Magnets can interfere with or

damage these types of devices.)

Option 2:

Option 1:

Materials:

Construction Paper

Printer Paper

Scissors

Pencil or Pen

Glue

Materials:

Magnet Sheet Paper for Ink Jet Printers

Utility Knife or Scissors

Ruler

Step 1: Print

Load paper following printer instructions.

(Handle paper by the edges to avoid finger-

prints.) Print Frame Template using your ink jet

printer. (For best results, load only one sheet at

a time.)

Step 1: Print

Load the magnet paper following printer instruc-

tions. (Handle paper by the edges to avoid

fingerprints.) Print Frame Template using your

ink jet printer on the glossy surface (imaging

side) of the paper. (For best results, load only one

sheet at a time.)

Step 2: Dry

Let paper dry several minutes before handling.

Step 3: Cut

Cut along the dotted lines.

PAGE 1

Step 4: Trace

Using the outside of the frame as a guide, trace

onto construction paper.

Step 5: Cut

Cut the construction paper following the lines.

This will be used as backing for the frame. Once

you’ve selected a photo to display in your frame,

place the construction paper piece behind the

photo and glue to the frame.

Step 6: Cut Pattern Piece

Cut out the pattern piece labeled frame stand.

Step 7: Trace Frame Stand

Trace the pattern piece onto construction paper.

Step 8: Cut

Using scissors, cut out the traced pattern on the

construction paper. This will be used as the frame

stand.

Frame Stand

Step 9: Adhere Stand to Frame

Glue the frame stand to the back of the frame.

Place the finished product on any countertop,

desk, or stand.

PAGE 2

Frame Template

Plik z chomika:

Inne pliki z tego folderu:

Inne foldery tego chomika: