PE20699GBDT.pdf

SPECIFIC VEHICLE ALARM FITTING INSTRUCTIONS REV. 00

www.cobra.it

MAKE

PEUGEOT

MOD.

206*

YEAR 99 ﬁ

PETROL

DIESEL

* Models with original equipment keyless entry system.

ALARM/SIREN

POSITION

Position the compact alarms and the sirens on the left in the engine compartment, on

the wheelhouse passenger’s side.

POWER SUPPLY

+ 30: connect to the 4 mm 2 RED wire located in the general power supply connector

of the fuse box.

- 31: connect with a ring terminal directly to the car body.

IGNITION WIRE

+ 15/54: connect to the wire located at the position nr. 4 of the 26 way blue

connector coming out of the central unit.

DIRECTION INDICATORS Connect to the wires at the positions nr. 10 and nr.11 of the 16 way black connector

coming out of the central unit.

ELECTRIC WINDOWS

Positive control signal

Front window, driver’s side:

cut the 1,5 mm 2 light BROWN wire.

Front window, passenger’s side:

cut the 1,5 mm 2 RED wire.

These connections should be effected in the wiring harness coming out of the

original switches of the windows closing.

ALARM CONTROLS

Positive control signal

Connect to the wires at the position nr. 16 for the setting on and to the position nr. 5

for the setting off in the 16 way connector, directly on the coming out of the central

unit.

The alarm system will set off opening with the original key.

IMMOBILISATION POINT

Inertial switch

Cut the BROWN wire located in the wiring harness coming out of the 2 way

connector directly on the way off the inertial switch, placed on the support of the

shock absorber, driver’s side in the engine compartment.

STARTER

+ 50: Cut the BLUE wire located in the wiring harness coming out of the connector of

the ignition key.

BONNET SWITCH

Install an additional switch on the headlamp support plate near the rubber trim of the

bonnet.

DOORS SWITCH

Connect to the wire at the position nr. 8 of the 26 way blue connector coming out of

the central unit.

BOOT SWITCH

Connect directly to the wire of the boot lamp coming out of the same.

Note: This information is not binding, therefore it must be considered only an example for installation purposes that must be executed

as per the instructions given on the product installation manual.

pe20699gbdt.doc

Plik z chomika:

Inne pliki z tego folderu:

Inne foldery tego chomika: