scxiaccs.pdf

SCXI Accessories

SCXI-1180 Feedthrough Panel

Extends the I/O signals of the DAQ device to the front of the SCXI chassis (Figure 1).

It occupies one slot of your SCXI system and easily connects to your SCXI cable

accessory. You can also use the SCXI-1180 to route the I/O signals of separate DAQ

devices to the front of your SCXI system for convenience.

SCXI-1180 ............................................................................................776572-80

SCXI-1181 Breadboard

A breadboard module with a 13.3 by 17.8 cm. (5.25 by 7 in.) breadboard area for

integrating custom circuitry into your SCXI system (Figure 2). This module can

connect to the DAQ device controlling the SCXI system by installing an SCXI-1351

one-slot cable extender next to the controlling SCXI cable assembly.

SCXI-1181 ............................................................................................776572-81

Figure 1.SCXI-1180 Feedthrough Panel

SCXI-1181K Module Developer Accessory

A kit of unassembled module parts, including front and rear connectors and

aluminum module housing. It is useful for custom module development with custom

printed circuit boards. It does not include a breadboard or printed circuit board, but

it does include dimensions needed for designing a custom board.

The front connector is a standard 96-pin male DIN C connector, compatible with the

SCXI-1300/1301/1381K or TBX-1303 terminal block kits.

SCXI-1181K ........................................................................................776572-81K

Figure 2. SCXI-1181 Breadboard

SCXI-1381K Terminal Block Developer Accessory

A kit of unassembled terminal block components for developing custom SCXI

terminal blocks. This kit includes the terminal block housing, strain-relief assembly,

and 96-pin DIN connector for mating with SCXI modules. This kit does not include

a printed circuit board or screw terminals for signal connection.

SCXI-1381K ........................................................................................777687-81K

SCXIbus Extender

With the SCXIbus extender, you can operate the module outside of the chassis, which

is useful for developing and debugging custom modules.

SCXIbus Extender..................................................................................181585-01

Figure 3. SCXI-1352 Cable

for Cascading Modules

SCXI-1352 Module-Cascading Cable Kit

A kit containing two ribbon cables (R1650 and R165050) for connecting the

conditioned output of an SCXI module (operating in parallel mode) directly to the

input of an adjacent module (Figure 3).

SCXI-1352 ..........................................................................................776575-52

Most SCXI chassis require AC

power. However, you can

use standard off-the-shelf DC

to AC power inverters to

power the chassis with a DC

power supply.

SCXI-1360 Series Chassis Filler Panels

Front ﬁller panels cover unused chassis slots and rear ﬁller panels cover the rear slots

not occupied by cable assemblies, multichassis adapters, one-slot cable extenders,

or SCXI-1357/SCXI-1358 high-voltage backplane units.

SCXI-1360 front ﬁller panel ....................................................................776576-60

SCXI-1361 rear ﬁller panel ....................................................................776576-61

...visit NI Developer Zone

at ni.com/express and

enter 0000000000000000.

548

National Instruments

Tel: (512) 794-0100 • Fax: (512) 683-9300 • info@ni.com • ni.com

SCXI Accessories

Rack-Mount Kits

Holds SCXI chassis in standard 19 in. rack-enclosures (Figure 4). Each kit offers

multiposition capability for both recessed and ﬂush mounting.

SCXI-1370 rack-mount kit (SCXI-1001, PXI-1010) ....................................776577-70

SCXI-1371 rack-mount kit (SCXI-1000/1000DC) ......................................776577-71

SCXI-1372 dual rack-mount kit (SCXI-1000/1000DC) ..............................776577-72

PXI-1011 rack-mount kit ........................................................................778074-01

SCXI-1373 Panel-Mount Kit

Mounts any 4-slot or 12-slot chassis to a panel or wall (Figure 5). You can mount the

chassis facing up or down, leaving clearance for front and rear cabling. You can also

rotate the chassis for access to both the front and rear of the chassis.

SCXI-1373 panel-mount kit ....................................................................776577-73

Figure 4. SCXI-1370 Rack-Mount Kit

SCXI-1374 Chassis Handle Kit

A chassis handle that easily attaches to either side of the SCXI chassis or SCXI-1382

battery pack (Figure 6). It is ideal for applications requiring increased mobility.

SCXI-1374 handle kit ............................................................................776577-74

SCXI Process Current Resistor Kit

A pack of four precision resistors for measurements of 0 to 20 mA and 4 to 20 mA

current inputs. Each resistor is a 249 Ω , 0.1%, 5 ppm/ºC, 0.25 W high-precision

resistor. For use with the SCXI-1100, 1102 Series, and 1122 modules, or the terminal

blocks for the SCXI-1120/D, 1121, 1140, 1141, 1142, and 1143.

SCXI process current resistor kit ..............................................................776582-01

Figure 5. SCXI-1373 Panel Mount

in rotated position

SCXI-1382 Battery Pack

A 12 VDC, 25 Ah battery pack that attaches directly to the SCXI-1000DC (Figure 7).

It can power a fully loaded chassis for a minimum of 5 hours. The optional dual-stage

battery charger can charge a completely discharged battery in 8 to 11 hours. The dual-

stage charger cannot power the SCXI-1000DC chassis. The charger is not sold seperately.

SCXI-1382 battery pack (without charger) ............................................776577-820

SCXI-1382 battery pack (with U.S. 120 VAC charger)............................776577-821

Figure 6. SCXI-1374 Chassis Handle

SCXI-1383 Power Supply

A 13.8 VDC, 4 A power supply/float charger for the SCXI-1000DC. It powers the

SCXI-1000DC from 115 VAC or 230 VAC power when DC power is unavailable.

Combine the SCXI-1382 with the SCXI-1383 to operate in standby mode and provide

uninterruptible power.

U.S. 120 VAC/Japanese 100 VAC ........................................................776577-831

Swiss 220 VAC ....................................................................................776577-832

Australian 240 VAC ............................................................................776577-833

Universal Euro 240 VAC ......................................................................776577-834

North American 240 VAC ....................................................................776577-835

United Kingdom 240 VAC ..................................................................776577-836

Figure 7. SCXI-1000DC Chassis,

SCXI-1382 Battery Pack and

SCXI-1374 Handle Accessory

National Instruments

Tel: (512) 794-0100 • Fax: (512) 683-9300 • info@ni.com • ni.com

549

Plik z chomika:

Inne pliki z tego folderu:

Inne foldery tego chomika: