SIMATIC S7-1200 Manual Easy Book.pdf

___________________

Easy Book

Preface

Introducing the powerful and

flexible S7-1200

___________________

STEP 7 makes the work

easy

___________________

SIMATIC

___________________

Getting started

S7-1200

Easy Book

___________________

PLC concepts made easy

Easy to create the device

configuration

___________________

Manual

___________________

Programming made easy

Easy to communicate

between devices

___________________

PID is easy

Web server for easy Internet

connectivity

___________________

Motion control is easy

___________________

Easy to use the online tools

___________________

Technical specifications

04/2011

A5E02486774-02

Legal information

Warning notice system

This manual contains notices you have to observe in order to ensure your personal safety, as well as to prevent

damage to property. The notices referring to your personal safety are highlighted in the manual by a safety alert

symbol, notices referring only to property damage have no safety alert symbol. These notices shown below are

graded according to the degree of danger.

Legal information

DANGER

indicates that death or severe personal injury will result if proper precautions are not taken.

WARNING

indicates that death or severe personal injury may result if proper precautions are not taken.

CAUTION

with a safety alert symbol, indicates that minor personal injury can result if proper precautions are not taken.

CAUTION

without a safety alert symbol, indicates that property damage can result if proper precautions are not taken.

NOTICE

indicates that an unintended result or situation can occur if the corresponding information is not taken into

account.

If more than one degree of danger is present, the warning notice representing the highest degree of danger will

be used. A notice warning of injury to persons with a safety alert symbol may also include a warning relating to

property damage.

Qualified Personnel

The product/system described in this documentation may be operated only by personnel qualified for the specific

task in accordance with the relevant documentation for the specific task, in particular its warning notices and

safety instructions. Qualified personnel are those who, based on their training and experience, are capable of

identifying risks and avoiding potential hazards when working with these products/systems.

Proper use of Siemens products

Note the following:

WARNING

Siemens products may only be used for the applications described in the catalog and in the relevant technical

documentation. If products and components from other manufacturers are used, these must be recommended

or approved by Siemens. Proper transport, storage, installation, assembly, commissioning, operation and

maintenance are required to ensure that the products operate safely and without any problems. The permissible

ambient conditions must be adhered to. The information in the relevant documentation must be observed.

Trademarks

All names identified by ® are registered trademarks of the Siemens AG. The remaining trademarks in this

publication may be trademarks whose use by third parties for their own purposes could violate the rights of the

owner.

Disclaimer of Liability

We have reviewed the contents of this publication to ensure consistency with the hardware and software

described. Since variance cannot be precluded entirely, we cannot guarantee full consistency. However, the

information in this publication is reviewed regularly and any necessary corrections are included in subsequent

editions.

Siemens AG

Industry Sector

Postfach 48 48

90026 NÜRNBERG

GERMANY

order number: 6ES7298-8FA30-8BQ0

Ⓟ 03/2011

Technical data subject to change

Preface

Welcome to the world of S7-1200, the latest in a line of the Siemens SIMATIC controllers.

The SIMATIC S7-1200 compact controller is the modular, space-saving controller for small

automation systems that require either simple or advanced functionality for logic, HMI and

networking. The compact design, low cost, and powerful features make the S7-1200 a

perfect solution for controlling small applications.

As part of the SIMATIC commitment to "totally integrated automation" (TIA), the S7-1200

product family and the STEP 7 programming tool give you the flexibility you need to solve

your automation needs.

The S7-1200 helps to make the most challenging tasks easy!

The SIMATIC S7-1200 controller solution, designed for the "compact" controller class, is

comprised of the SIMATIC S7-1200 controller and SIMATIC HMI Basic panels that can both

be programmed with SIMATIC STEP 7 engineering software. The ability to program both

devices using the same engineering software significantly reduces development costs.

The S7-1200 compact controller includes:

Built-in PROFINET

High-speed I/O capable of motion control, onboard

analog inputs to minimize space requirements and

the need for additional I/O, 2 pulse generators for

pulse-width applications (Page 96 ), and up to 6

high-speed counters

On-board I/O points built into the CPU modules

provide from 6 to 14 input points and from 4 to 10

output points.

Signal modules for DC, relay, or analog I/O

expand the number of I/O points, and

innovative signal boards snap onto the front

of the CPU to provide additional I/O

(Page 16) .

The SIMATIC HMI Basic panels were

designed specifically for the S7-1200.

This Easy Book provides an introduction to

the S7-1200 PLC. The following pages offer

an overview of the many features and

capabilities of the devices.

For additional information, refer to the S7-1200 programmable contro ler system manua . For

information about UL and FM certification, CE labeling, C-Tick and other standards, refer to

the Technical specifications (Page 203) .

Easy Book

Manual, 04/2011, A5E02486774-02

Preface

This manual describes the following products:

● STEP 7 V11 Basic and Professional

● S7-1200 CPU firmware release V2

Documentation and information

S7-1200 and STEP 7 provide a variety of documentation and other resources for finding the

technical information that you require.

● The S7-1200 system manual provides specific information about the operation,

programming and the specifications for the complete S7-1200 product family. In addition

to the system manual, the S7-1200 Easy Book provides a more general overview to the

capabilities of the S7-1200 family.

Both the system manual and the Easy Book are available as electronic (PDF) and printed

manuals. The electronic manuals can be downloaded from the customer support web site

and can also be found on the companion disk that ships with every S7-1200 CPU.

● The online information system of STEP 7 provides immediate access to the conceptual

information and specific instructions that describe the operation and functionality of the

programming package and basic operation of SIMATIC CPUs.

● My Documentation Manager accesses the electronic (PDF) versions of the SIMATIC

documentation set, including the system manual, the Easy Book and the information

system of STEP 7. With My Documentation Manager, you can drag and drop topics from

various documents to create your own custom manual.

The customer support entry portal ( http://support.automation.siemens.com ) provides a

link to My Documentation Manager under mySupport.

● The customer support web site also provides podcasts, FAQs, and other helpful

documents for S7-1200 and STEP 7. The podcasts utilize short educational video

presentations that focus on specific features or scenarios in order to demonstrate the

interactions, convenience and efficiency provided by STEP 7. Visit the following web sites

to access the collection of podcasts:

– STEP 7 Basic web page ( http://www.automation.siemens.com/mcms/simatic-

controller-software/en/step7/step7-basic/Pages/Default.aspx )

– STEP 7 Professional web page ( http://www.automation.siemens.com/mcms/simatic-

controller-software/en/step7/step7-professional/Pages/Default.aspx )

● You can also follow or join product discussions on the Service & Support technical forum

( https://www.automation.siemens.com/WW/forum/guests/Conferences.aspx?Language=e

n&siteid=csius&treeLang=en&groupid=4000002&extranet=standard&viewreg=WW&nodei

d0=34612486 ). These forums allow you to interact with various product experts.

– Forum for S7-1200

( https://www.automation.siemens.com/WW/forum/guests/Conference.aspx?SortField=

LastPostDate&SortOrder=Descending&ForumID=258&Language=en&onlyInternet=Fa

lse )

– Forum for STEP 7 Basic

( https://www.automation.siemens.com/WW/forum/guests/Conference.aspx?SortField=

LastPostDate&SortOrder=Descending&ForumID=265&Language=en&onlyInternet=Fa

lse )

Easy Book

Manual, 04/2011, A5E02486774-02

Preface

Service and support

In addition to our documentation, we offer our technical expertise on the Internet on the

customer support web site ( http://www.siemens.com/automation/support-request ) .

Contact your Siemens distributor or sales office for assistance in answering any technical

questions, for training, or for ordering S7 products. Because your sales representatives are

technically trained and have the most specific knowledge about your operations, process

and industry, as well as about the individual Siemens products that you are using, they can

provide the fastest and most efficient answers to any problems you might encounter.

Easy Book

Manual, 04/2011, A5E02486774-02

Plik z chomika:

Inne pliki z tego folderu:

Inne foldery tego chomika: