Renault.pdf

APPLICATIONS MANUAL

RENAULT ANTI THEFT SYSTEM

CONTENTS

PAGE

APPLICATIONS

1.1

CONNECTOR LOCATIONS

2.1

GENERAL OPERATION

3.1

SPECIAL FUNCTIONS

4.1

APM106

Version 1.0 09/02

APPLICATIONS

VEHICLE

MODEL YEAR

CABLE

CLIO II

ALL MODELS

ADC110

KANGOO II

ALL MODELS

ADC110

MEGANE

99 >ON

ADC110

MEGANE SCENIC

99 > ON

ADC110

LAGUNA II

ALL MODELS

ADC110

TRAFFIC II

ALL MODELS

ADC110

KANGOO II SYSTEM IDENTIFICATION

NORMAL KANGOO

KANGOO II

1.1

CONNECTOR LOCATIONS

CLIO II

MEGANE

2.1

CONNECTOR LOCATIONS

LAGUNA II

MEGANE SCENIC

2.2

GENERAL OPERATION

INTRODUCTION

The Renault Immobiliser system uses either Infra Red or Radio Frequency for Plip key

operation and transponder key technology for key entry and starting. The Infra Red and

RF systems uses a rolling code system to ensure the vehicle system cannot be

breached.

Activation of the Immobiliser system is indicated by the LED indicator in the Instrument

cluster. If there is a fault in the system, an emergency access code can be used to dis-

able the system using the central door locking button or key and the LED to enter the

code.

On petrol vehicles the immobiliser is carried out by the Fuel Injection system and on Die-

sel systems it is carried out by the coded solenoid valve.

The immobiliser system automatically sets itself after 10 minutes if both doors are closed,

this can be 30 minutes in other countries. If the ignition is switched OFF and one of the

front doors is opened, then the immobiliser sets itself after 1 minute, in other countries it

can be 10 minutes.

To disarm the system the doors must be locked and unlocked using the plip key func-

tions. Only 2 plips can be operated on this system.

The immobiliser key system operates independently of the Plip system. When the key is

turned to the Ignition OFF position the immobiliser activates after 10 seconds. This sys-

tem used 2 special matched keys with coded transponders.

The system comprises of Receiver aerial around the ignition lock, a decoder unit located

under the dashboard, which sends the decoding signal to the Fuel Injection computer or

coded solenoid valve, and the RED warning light.

Key programming and Plip programming can be performed using the AD100 and if the

relevant security code for the vehicle is available.

The security code is normally displayed in the front of the service book, if not can only be

obtained from a Renault dealer.

3.1

Plik z chomika:

Inne pliki z tego folderu:

Inne foldery tego chomika: