#302 leginsy opis.pdf

Generated by Foxit PDF Creator © Foxit Software

http://www.foxitsoftware.com For evaluation only.

Shelby Kaava #302 Vuokatti Tights

The Vuokatti tights are great for a wide range of materials to make tights or underwear.

Designed with a minimum of seams and easy contruction in mind, these tights also look

good. A perfect match for the Vuokatti Pullover. Pattern includes sizes XS-XXL.

Shelby Kaava Pant Sizing

Men (C) 40-42 44-46 48-50 52-54

Women (C) 36-38 40-42 44-46

XXL

Waist 67

107

Hip 86

102

110

118

126

Outside leg seam 103,5 106,5 109,5 112,5 115,5

118,5

Materials

Fabric 1,0 m 1,0 m 1,0 m 1,1 m 1,1 m 1,1 m

25mm Elastic

1 m

Material: Included sizing is for stretch fleece, if material does not

stretch, make at least one size larger than the measurements say.

Recommended fabrics include Polartec PowerStretch, Powerdry,

and 100, Lycra fabrics, Schoeller Dryskin, wool knits etc.

Sizing: Sizing is for fleece with at least 25% stretch in this pattern.

If you use a non-stretch material, cut at least one size larger.

Remember: No seam allowances in the pattern! If sewing using a

flatseam technique seam allowances are not needed. Otherwise if

making a normal seam add a 5 mm seam allowance when cutting.

The instructions assume you are using normal seams. A lower cuff

allowance of 2,5 cm is included. The pattern is designed for the

bottom of the waist elastic to be attached to the top edge of the

tights. Add allowance if you want the elastic to be encased (2 x the

elastic width).

Download the PDF pattern and print it. Below you will find PDFs for A4, A3, Letter

and Tabloid paper sizes. Do not apply any scaling. The pattern consists of pages that

need to be overlapped and taped together. The alignment marks form boxes with an

X in the middle.

#302 Vuokatti Tights pattern (A4)

#302 Vuokatti Tights pattern (A3)

#302 Vuokatti Tights pattern (letter)

#302 Vuokatti Tights pattern (tabloid)

Cutting

Choose the correct size according to the sizing chart. Fold the

fabric in half and place piece A. Carefully cut, adding seam

allowances if needed. Cut piece B from left over material as only

one is needed, remember to mark the single and double notches.

Crotch seams

The front and back crotch seams are sewn first. Place the A

pieces right sides together and sew the front and back crotch

seams.

Crotch insert

Now the crotch insert will be sewn to the back side of the

tights, centered at the back crotch seam. Match the double

notch to the back crotch seam and sew along the length of

the insert. Be carefully when starting the seam as the end of

piece B is quite thin.

http://www.foxitsoftware.com For evaluation only.

Inner seam

Now the entire inner seam is sewn. Place the tights inside-out and pin the inside seam

along the entire length from one ankle, to the crotch, and then to the other ankle.

Sew the seam, aligning the single notch on the crotch insert with the front crotch

seam.

Waistband and cuff

Measure the length of the waistband by trying around

your waist. Overlap the ends and sew together with a

zigzag. The top edge of the tights will overlap the

waistband by 1 cm on the inside of the elastic and then

is sewn in place with a wide zig-zag. Pin the waistband

in place, starting from the back and pinning in quarters.

The elastic is smaller than the waist of the tights, so the

material needs to be evenly spaced. Now sew with a zigzag around the entire

waistband, stretching the elastic to the same length as the fabric while sewing.

After trying on the tights fold the cuffs over to the desired length and mark. Sew the

hem (with a stretch stitch of zig-zag) 2,5 cm from the edge.

This work is licensed under a Creative Commons License .

Plik z chomika:

Inne pliki z tego folderu:

Inne foldery tego chomika: