GEO MANUAL.pdf

WARNING

adhErE sTricTlY TO ThEsE aNd all OThEr

saFETY iNsTrUcTiONs aNd gUidEliNEs!

QUicK gUidE

CONTENTS

ORIENTATION

QUICK SET-UP

USING YOUR GEO

adhErE sTricTlY TO ThEsE aNd all OThEr

saFETY iNsTrUcTiONs aNd gUidEliNEs!

MENU TREE

ADVANCED SET-UP

01.

02.

the eclipse Geo is not a toy.

careless or improper use, including failure to follow

instructions and warnings within this user manual

and attached to the Geo could cause death or

serious injury.

do not remove or deface any warnings attached to

the Geo.

paintball industry standard eye/face/ear and head

protection designed speciically to stop paintballs

and meeting Astm standard f1776 (usA) or ce

standard (europe) must be worn by user and any

person within range.

persons under 18 years of age must have adult

supervision when using or handling the Geo.

observe all local and national laws, regulations and

guidelines.

use only professional paintball ields where codes

of safety are strictly enforced.

use compressed air/nitrogen only. do not use co 2

Always follow instructions, warnings and guidelines

given with any irst stage regulator you use with

the Geo.

use 0.68 calibre paintballs only.

keep the Geo switched off until ready to shoot.

12.

13.

treat every marker as if it is loaded.

never point the Geo at anything you do not intend

to shoot.

do not shoot at persons at close range.

Always measure your markers velocity before

playing paintball, using a suitable chronograph.

never shoot at velocities in excess of 300 feet (91.44

meters) per second, or at velocities greater than

local or national laws allow

do not ‘gas up’ the Geo without the bolt assembly

correctly installed, as high-pressure gas will be

emitted.

never look into the barrel or breech area of the Geo

whilst the marker is switched on and able to ire.

never put your inger or any foreign objects into

the paintball feed tube of the Geo.

never allow pressurised gas to come into contact

with any part of your body.

Always switch off the Geo when not in use.

Always it a barrel-blocking device to the Geo when

not in use on the ield of play.

Always remove all paintballs from the Geo when

not in use on the ield of play.

24.

Always relieve all residual gas pressure from the

Geo before removing the irst stage regulator.

Always remove the irst stage regulator and relieve

all residual gas pressure from the Geo before

disassembly.

Always remove the irst stage regulator and relieve

all residual gas pressure from the Geo for transport

and storage.

Always follow guidelines given with your irst stage

regulator for safe transportation and storage..

Always store the Geo in a secure place..

This UsErs MaNUal is iN ENglish.

it contains important safety

guidelines and instructions. should

you be unsure at any stage, or

unable to understand the contents

within this manual you must seek

expert advice.

lE MOdE d’EMplOi EsT EN aNglais.

ilcontient des instructions et

mesures de sécurité importantes.

en cas de doute, ou s’il vous est

impossible de comprendre le

contenu du monde d’emploi,

demandez conseil à un expert.

MAINTENANCE

FAULT FINDING

SERVICE CENTERS

PARTS LIST

SPARES & ACCESSORIES

25.

14.

03.

15.

26.

04.

16.

27.

17.

05.

EsTE MaNUal dE UsUariOs

(OpErariOs) UsariOs EsTá EN

iNglés .

contiene importantes normas de

seguridad e instrucciones. si no

está seguro de algùn punto o no

entiende los contenidos de este

manual debe consultar con un

experto.

diEsE BEdiENUNgs - UNd

BENUTzEraNlEiTUNg isT iN

ENglisch.

sie enthålt wichtige

sicherheitsrichtlinen und -

bestimmungen. solten sie sich in

irgendeiner weise un sicher sein.

oder den inhalte dies heftes nicht

versthen, lassen sie siche bitte von

einen experten beraten.

06.

18.

07.

19.

20.

08.

09.

21.

22.

10.

11.

23.

NOTE: this user mAnuAl must AccompAny the

product in the event of resAle or new ownership.

should you be unsure At Any stAGe you must seek

expert Advice! (see service centers pAGe 76-77)

6 OriENTaTiON

names the component parts of the Geo marker. this

section is essential reading for everyone.

26 > UNdErsTaNdiNg ThE lOcK iNdicaTOr

> UNdErsTaNdiNg ThE BaTTErY iNdicaTOr

> ThE gaME TiMEr

> ThE shOT cOUNTEr

27 > ThE aVEragE raTE OF FirE

> ThE pEaK raTE OF FirE

> ThE MENU sYsTEM

28 MENU TrEE

A quick reference guide to the user interface.

28 > MaiN MENU

29 > sET-Up MENU

32 adVaNcEd sET-Up

in depth information on setting up the Geo.

44 > TiMiNg -the timing menu

> dwEll -the dwell parameter

> Fsd cOMp -the first shot drop-off

compensation parameter

> Fsd dlY -the first shot drop-off delay parameter

45 > lighT -the light parameter

> slEEp -the sleep parameter

46 > FilTEr -the filter menu

47 > dBOUNcE -the debounce parameter

> EMpTY -the empty breech time parameter

76 sErVicE cENTErs

information on the location of your nearest Geo

service center.

78 parTs lisT

A table of components that make up the Geo.

warraNTY card

tear-out product registration card to be completed

and returned. Alternatively register online at

www.planeteclipse.com

83 sparEs & accEssOriEs

Available upgrade / repair kits for your Geo.

QUicK gUidE

CONTENTS

ORIENTATION

QUICK SET-UP

USING YOUR GEO

6 > KNOw YOUr gEO

7 > EclipsE shaFT 3 BarrEl

8 > iNliNE rEgUlaTOr

9 > gEO BOlT sYsTEM

10 > gEO sOlENOid assEMBlY

11 > OpEraTiONal OVErViEw

12 > gEO NaVigaTiON cONsOlE

13 QUicK sET-Up

details on how to get up and running quickly with your

Geo. this section is essential reading for everyone.

13 > iNsTalliNg a 9V BaTTErY

14 > swiTchiNg ON ThE gEO

> swiTchiNg OFF ThE gEO

> FiriNg ThE gEO

> ThE gEO circUiT BOard

15 > UsiNg ThE BrEaK BEaM sENsOr sYsTEM

16 UsiNg YOUr gEO

more detailed information on how to use and interact

with the Geo via its user interface.

16 > sETTiNg Up

> iNsTalliNg a prEsET air sYsTEM

17 > T-slOT MOUNTiNg sYsTEM

> MacrOliNE hOsiNg & ElBOws

18 > iNsTalliNg aN adJUsTaBlE air sYsTEM

19 > aTTachiNg a lOadEr

20 > sETTiNg ThE TriggEr

22 > adJUsTiNg ThE VElOciTY

> adJUsTiNg ThE FiriNg chaMBEr VOlUME

23 > UsEr iNTErFacE

> swiTchiNg ON

> rUN scrEEN laYOUT

24 > UNdErsTaNdiNg ThE BBss iNdicaTOr

25 > UNdErsTaNdiNg ThE sOUNd iNdicaTOr

> UNdErsTaNdiNg ThE TriggEr dETEcTiON iNdicaTOr

MENU TREE

ADVANCED SET-UP

48 > FUll -the full parameter

> pUll TM -the pull time parameter

49 > rEl TM -the release time parameter

> pUll pT -the pull point parameter

50 > rEl pT -the release point parameter

> Basic TriggEr FilTEr sET-Up

> adVaNcEd TriggEr FilTEr sET-Up

51 > TraiNiN -the training parameter

52 > ThE hardwarE MENU

> TriggEr -the trigger parameter

> sOUNd -the sound parameter

> TONEs -the tones parameter

53 MaiNTENaNcE

A guide to performing routine maintenance.

54 > clEaNiNg ThE BrEaK BEaM sENsOr sYsTEM

56 > clEaNiNg ThE iNliNE rEgUlaTOr

58> MaiNTaiNiNg ThE gEO BOlT sYsTEM

62 > hOw TO rEMOVE ThE FraME

65 > ThE gEO sOlENOid assEMBlY

68 > ThE gEO TriggEr assEMBlY

70 > ThE gEO ON/OFF pUrgE sYsTEM

72 FaUlT FiNdiNg

information on how to resolve any problems that

might arise with your Geo.

MAINTENANCE

FAULT FINDING

SERVICE CENTERS

PARTS LIST

SPARES & ACCESSORIES

32 > accEssiNg ThE MENU sYsTEM

> MOViNg arOUNd ThE MENUs

> alTEriNg paraMETErs

33 > ThE MaiN MENU

> displaY -the display parameter

34 > TiMEr -the Game timer menu

> gaME -the Game time parameter

35 > alarM -the Alarm time parameter

> sTarT -the timer start parameter

36 > ThE sET-Up MENU

37 > lOcK -the tournament lock parameter

> prEsET -the preset menu

> lOad -the load preset parameter

38 > saVE - the save preset parameter

> MOdE -the firing mode parameter

39 > rOF cap -rate of fire cap parameter

> Max rOF -maximum rate of fire parameter

40 > OFF rOF -rate of fire with bbss off parameter

> rMp sET -the ramp settings menu

41 > TYpE -the ramp type parameter

> raTE -the linear ramp rate parameter

42 > pUll NO -the ramp start parameter

> KicK iN -the ramp kick-in parameter

43 > sUsTaiN -the sustain rate parameter

> rEsTarT -the ramp restart parameter

CONTENTS

KNOw YOUr gEO

claMpiNg lEVEr

EclipsE shaFT 3 BarrEl

QUicK gUidE

CONTENTS

ORIENTATION

QUICK SET-UP

USING YOUR GEO

FEEdNEcK

BOdY

NOTE: the bore size of your shAft 3 mAy vAry

AccordinG to the model of Geo you hAve.

ORIENTATION

your eclipse Geo comes as standard with a eclipse shaft 3 barrel.

the barrel screws into the body of the Geo using a right hand thread

meaning that if you hold the Geo pointing away from you the barrel screws

into the body in a counter-clockwise direction.

the barrel comprises of two parts, a barrel back and a barrel front .

the two parts are joined together with a left hand thread meaning that

if you hold the barrel, with the back nearest you, the front unscrews in a

counter-clockwise direction. the bore size of the barrel back is engraved at

the end of the barrel back .

on the barrel back there is a #016 nbr70 o-ring which prevents the barrel

from vibrating loose from the Geo body when the marker is ired. there is also

an o-ring on the barrel front (#015 nbr70) helps with alignment between

the barrel back and front.

replace these o-rings as necessary.

MENU TREE

ADVANCED SET-UP

MAINTENANCE

FAULT FINDING

SERVICE CENTERS

PARTS LIST

SPARES & ACCESSORIES

BOlT assEMBlY

BlaNKiNg plUg

sOlENOid rETaiNiNg scrEws

a EYE cOVEr scrEw

B EYE cOVEr

c sOlENOid assEMBlY

d pilOT ValVE

E circUiT BOard

F TriggEr

BaTTErY

MacrO liNE

ElBOw

OOps piN

OOps

KNOB

iNliNE rEgUlaTOr

assEMBlY

FraME

scrEw

OOps

iNsErT

OOps

scrEws

OOps

BOdY

NOTE: the Geo will only Accept cOcKEr ThrEadEd

bArrels. do not use Any other type of bArrel threAd.

iNliNE rEgUlaTOr

#15 NBr 90

gEO BOlT sYsTEM

QUicK gUidE

CONTENTS

ORIENTATION

QUICK SET-UP

USING YOUR GEO

WARNING

warNiNg: dO NOT rEMOVE ThE iNliNE pUrgE cONTrOl ValVE.

FailUrE TO cOMplY wiTh This warNiNg MaY caUsE ThE MarKEr TO FirE a

shOT ThaT cOUld rEsUlT iN sEriOUs iNJUrY Or dEaTh.

ORIENTATION

prOp shaFT

MENU TREE

ADVANCED SET-UP

#15 NBr 70

MAINTENANCE

FAULT FINDING

SERVICE CENTERS

PARTS LIST

SPARES & ACCESSORIES

iNliNE rEgUlaTOr pisTON

iNliNE rEgUlaTOr spriNg

iNliNE rEgUlaTOr TOp

iNliNE pUrgE

cONTrOl ValVE

#008 NBr 70

BOlT

iNliNE rEgUlaTOr

adJUsTEr scrEw

iNliNE rEgUlaTOr swiVEl

#011 NBr 70

caN

#16 NBr 70

iNliNE rEgUlaTOr BOTTOM

Plik z chomika:

Inne pliki z tego folderu:

Inne foldery tego chomika: