S7-300_mod_e.pdf

Preface, Contents

General Technical Specifications

SIMATIC

Power Supply Modules

Digital Modules

S7-300 and M7-300

Programmable Controllers

Module Specifications

Analog Modules

Other Signal Modules

Interface Modules

Reference manual

RS 485 Repeater

This manual is part of the following documentation packages

with order nos:

S7–300 Programmable Controller:

6ES7 398-8AA03-8BA0

ET 200M Distributed I/O Device:

6ES7 153-1AA00-8BA0

SIMATIC TOP connect and

SIMATIC TOP connect TPA

Appendices

Parameter Sets for Signal

Modules

Diagnostics Data of the Signal

Modules

Dimension Drawings

Spare Parts and Accessories for

S7-300 Modules

Guidelines for Handling Electro-

static Sensitive Devices (ESD)

List of Abbreviations

Glossary, Index

EWA 4NEB 710 6067-02 02

Edition 02/2001

Safety Guidelines

This manual contains notices which you should observe to ensure your own personal safety, as well as to

protect the product and connected equipment. These notices are highlighted in the manual by a warning

triangle and are marked as follows according to the level of danger:

Danger

indicates that death, severe personal injury or substantial property damage will result if proper precau-

tions are not taken.

Warning

indicates that death, severe personal injury or substantial property damage can result if proper precau-

tions are not taken.

Caution

indicates that minor personal injury or property damage can result if proper precautions are not taken.

Note

draws your attention to particularly important information on the product, handling the product, or to a

particular part of the documentation.

Qualified Personnel

Only qualified personnel should be allowed to install and work on this equipment. Qualified persons are

defined as persons who are authorized to commission, to ground, and to tag circuits, equipment, and sys-

tems in accordance with established safety practices and standards.

Correct Usage

Note the following:

Warning

This device and its components may only be used for the applications described in the catalog or the

technical descriptions, and only in connection with devices or components from other manufacturers

which have been approved or recommended by Siemens.

This product can only function correctly and safely if it is transported, stored, set up, and installed cor-

rectly, and operated and maintained as recommended.

Trademarks

SIMATIC, SIMATIC HMI and SIMATIC NET are registered trademarks of SIEMENS AG.

Some of other designations used in these documents are also registered trademarks; the owner’s rights

may be violated if they are used by third parties for their own purposes.

The reproduction, transmission or use of this document or its contents is not

permitted without express written authority. Offenders will be liable for

damages. All rights, including rights created by patent grant or registration of

a utility model or design, are reserved .

Disclaimer of Liability

We have checked the contents of this manual for agreement with the hard-

ware and software described. Since deviations cannot be precluded entirely,

we cannot guarantee full agreement. However, the data in this manual are

reviewed regularly and any necessary corrections included in subsequent

editions. Suggestions for improvement are welcomed.

Siemens AG

Automation and Drives (A&D)

Industrial Automation Systems (AS)

Postfach 4848, D- 90327 Nürnberg

S7-300 and M7-300 Programmable Controllers Module Specifications

EWA 4NEB 710 6067-02 02

Siemens AG 1998

Technical data subject to change.

Index-2

Siemens Aktiengesellschaft

Preface

Purpose of the manual

The information contained in this manual will enable you to look up operator

actions, function descriptions and the technical specifications of the signal

modules, power supply modules and interface modules of the S7-300.

How to configure, assemble and wire these modules in an S7-300, M7-300 or

ET 200M system is described in the installation manuals for each system.

Audience

This manual describes the modules of the S7-300 which are used in the S7-300,

M7-300 and ET 200M systems. It includes data sheets for the signal modules,

power supply modules and interface modules of the S7-300.

Changes compared with the previous version

Compared to the previous version, of the ”Module Data” reference manual, the

following chapters and appendices have been thoroughly revised and new modules

added, as necessary:

Chapte r 3 “ Digital Modules”,

Chapter 4 “ Analog Modules”

Chapter 5 “O ther Signal Modules”

Chapte r 8 “S IMATIC TOP connect und SIMATIC TOP connect TPA”

Appendi x A “ Parameter Sets for Signal Modules”, Appendix B “ Diagnostic Data

of Signal Modules”, List of Abbreviations and Glossary

Note: The previous version of this ”Module Data” reference manual can be

recognized by the number in the footer: EWA 4NEB 710 6067-0x-01.

The current number is: EWA 4NEB 710 6067-0x-02.

S7-300 and M7-300 Programmable Controllers Module Specifications

EWA 4NEB 710 6067-02 02

iii

Preface

Standards and approvals

The S7-300 meets the requirements and criteria of IEC 61131, Part 2. The S7-300

satisfies the requirements of the CE Mark. The approbations for CSA, UL and FM

are available for the S7-300.

Details on the approbations and standards are given in Section 1.1.

How the manual fits in

This manual forms part of the documentation for the S7-300, M7-300 and

ET 200M.

System

Documentation Package

S7-300

S7-300 Programmable Controller, Installation and Hardware

S7-300, M7-300 Programmable Controllers, Module Specifications

S7-300 Instruction List

M7-300

M7-300 Programmable Controller, Installation and Hardware

S7-300, M7-300 Programmable Controllers, Module Specifications

ET 200M

ET 200M Distributed I/O Device

S7-300, M7-300 Programmable Controllers, Module Specifications

CD-ROM

Note: You can also purchase the whole SIMATIC S7 documentation as a

SIMATIC S7 reference collection on a CD-ROM.

Navigation

To help you find special information quickly, the manual contains the following

access aids:

At the start of the manual you will find a complete table of contents and a list of

the diagrams and tables that appear in the manual.

An overview of the contents of each section is provided in the left column on

each page of each chapter.

You will find a glossary in the appendix at the end of the manual. The glossary

contains definitions of the main technical terms used in the manual.

At the end of the manual you will find a comprehensive index which gives you

fast access to the information you need.

S7-300 and M7-300 Programmable Controllers Module Specifications

EWA 4NEB 710 6067-02 02

Preface

Attributes of technical specifications

Several values of the technical data are specified with attributes in the module data

sheets.

These attributes for the values in the technical data mean:

Attribute

Meaning

minimum/maximum

A minimum/maximum value represents a limit or operating value

guaranteed by SIEMENS. The minimum or maximum of this

value must not be exceeded within other operating limit values

during operation. As a user, you must stay within the limits of this

value.

typical

The typical value becomes settled under rated conditions and at

an ambient temperature of25 ° C. Values may fall below or

exceed the typical value due to component tolerances.

approx.

The “approx.” value denotes a rounded value, for example the

weight of a module.

without attributes

Values without attributes are rated values with no tolerances.

Further support

Please contact your local Siemens representative if you have any queries about

the products described in this manual.

If you have any questions or suggestions concerning this manual, please fill in the

form at the end of this manual and return it to the specified address. Please feel

free to enter your personal assessment of the manual in the form provided.

We offer a range of courses to help you to get started with the SIMATIC S7

programmable controller. Please contact your local training center or the central

training center in Nuremberg, D-90327 Germany, Tel. +49 911 895 3200.

S7-300 and M7-300 Programmable Controllers Module Specifications

EWA 4NEB 710 6067-02 02

Plik z chomika:

Inne pliki z tego folderu:

Inne foldery tego chomika: