yzf-r1_acce_asse_001.pdf

Assembling the Tool Box

First, assemble each component by following the

working method and markings. Then, refer to the il-

lustration and photos below to glue the parts together.

Indication of

Working Methods

Fold or Curve

Adhere

Tools

Sheet A-8, 60 parts in total

Fold each relevant part according to the assembly symbols.

* Freely display the tools in the functional drawers of the tool box.

Tool-a

Fold only the edges.

Tool-b

Fold only the edges.

Tool-c

A-94 (96)

A-95 (97)

A-42~47

A-48~56

Make six replicas of the part in

various sizes.

Make nine replicas of the part in

various sizes.

Make two different-sized repli-

cas of each part.

Tool-d

A-86 (87) (91) (92) (93)

Tool-e

A-57 (58) (59)

Tool-i

A-68~83

A-84 (85) (88) (89) (90)

Make five different-sized replicas of

each part.

Make three replicas of the part.

Make sixteen replicas of the part

in various sizes.

Tool-f

Tool-g

A-60 (61)

A-66 (67)

Tool-k

A-98 (100)

Make two replicas of the part.

Tool-h

Tool-i

Insert and glue

part A-99 after

making a slit in

part A-98.

A-64 (65)

A-62 (63)

A-99Åi101Åj

Make two replicas of the part.

Make two replicas of the part in

various sizes.

- 1 -

Assembling the Tool Box

First, assemble each component by following the

working method and markings. Then, refer to the il-

lustration and photos below to glue the parts together.

Indication of

Working Methods

Fold or Curve

Adhere

Drawers

Sheet A-5.6.7, 23 parts in total

Fold each relevant part according to the assembly symbols.

Drawer- a. b

Make two replicas of each part.

Drawer- c

A-36 (37)

A-38

A-40 (41)

A-39

Drawer- d. e. f

A-29 (30)(31)

Drawer- g(dummy)

Drawer- h(dummy)

Make three replicas

of each part.

A-21

A-23

A-28

A-19

A-20

A-27

A-22

A-24 (25)(26)

Drawer-j

Drawer- i

A-33

A-35

A-34

A-32

- 2 -

Assembling the Tool Box

First, assemble each component by following the

working method and markings. Then, refer to the il-

lustration and photos below to glue the parts together.

Indication of

Working Methods

Fold or Curve

Adhere

Body of Tool Box

Sheet A-2.3.4.5, 15 parts in total

Fold each relevant part according to the assembly symbols.

Lid

Inner walls- top board and bottom board

A-3

Tuck the part in

completely and

glue it.

A-7 (8)

A-7 is to be the top board

and A-8 the bottom board.

Tuck the part in

completely and

glue it.

Inner walls-

central part- vertical

Inner walls-

central part- horizontal

Inner walls- left and right

Looking at the diagram, A-9

should be on the left and A-10

on the right.

A-5

A-6

A-9 (10)

Wheels

A-15 (16) (17) (18)

A-11 (12) (13) (14)

Make four identical wheels.

- 3 -

Assembling the Tool Box

First, assemble each component by following the

working method and markings. Then, refer to the il-

lustration and photos below to glue the parts together.

Indication of

Working Methods

Fold or Curve

Adhere

Finish

Fold each relevant part according to the assembly symbols.

Please use the dots on each component as reference when gluing surfaces.

Reference photo

Assemble according to steps through .

Assembly Instructions

Glue six previously assembled boards of the inner walls.

Glue the inner walls to A-2.

Glue folded A-1 to .

Insert and glue the previously assembled drawers in place.

Note: Freely place tools in the functional drawers.

Carefully keep the lid open when gluing it to A-2. Also glue

A-4 between the lid and A-1.

Glue each wheel to the bottom board.

Lid

Inner walls-

central part- horizontal

Inner walls- top board

Drawer- a

Drawer- b

A-4

Drawer- c

Inner walls-

central part- vertical

Inner walls- left

A-2

Drawer- d

Drawer- e

Drawer- f

Inner walls- right

Inner walls- bottom board

Wheels

A-1

Drawer- i

Drawer- j

Drawer- h

Drawer- g

- 4 -

Plik z chomika:

Inne pliki z tego folderu:

Inne foldery tego chomika: