yzf-r1_assembly_full.pdf
(
487 KB
)
Pobierz
YZZF-R1
PAPER CRAFT
Assembly Instructions
Thank you for downloading the "YZF-R1" paper craft model. By simply
following this manual while referring to the names and numbers shown on the
parts sheets, you can assemble an authentic-looking replica of the YZF-R1.
Assembly instructions: Fifteen A4-sized sheets.
Paper craft: Fourteen A4-sized sheets with 170 parts in all
These instructions apply only to the "YZF-R1".
These Paper Craft parts are easier to work with when printed out on strong,
thick paper (like postcard stock).
*In creating these Paper Craft models we use 135kg Kent paper stock (0.18mm).
Note
TO BEGIN
Basic working method and markings
Tools and materials needed
-Ruler -Scissors - Blade cutter or "Exacto-knife" - Awl or
other pointed tool (for making a folding crease) - Felt
pen - Pin set - Glue - Hand towel ( for cleaning your
fingers) - Dictionary or other heavy book ( to press the
papers flat)
Solid lines
Fold along these lines. The printed
surface should be on the outside of
the folded shape.
Item of Caution
*Take care when using sharp or pointed objects or when
using bladed cutting tools. Place a heavy sheet of paper
under the paper you want to cut.
*Use glue and other adhesives only in well-ventilated
areas.
*When printing, use a slightly reduced font size as there
are many differences in dimensions depending on the
type of printer used.
Broken lines
Fold along these lines. The printed
surface should be on the inside of
the folded shape.
Dotted line
Cut along these lines
HOW TO ASSEMBLE
Cut out parts marked with an as-
terisk(*).
*Follow the working method and markings carefully.
*Cut carefully along the outter line with a cutting blade,
Exacto-knife or scissors.
One - point Advice
Red dots are the reference positions
for gluing surfaces.
*Cut carefully with a cutting blade, Exacto-knife or
scissors.
*For folding parts, first use an awl or other pointed
tool to make a light crease along the dotted or solid
line. This will make the folds straight. Avoid making
strong creases, as this will cause the paper to tear.
*As an adhesive, white, wood glue is recommended.
Avoid over application as this will cause the paper
to wrinkle.
*Before beginning assembly, test adhesive amounts
on extra paper.
*Occasionally, white spots will be apparent on folds
and cuts. Use a marker or pencil to fill-in these spots.
It is recommended that this be done after each stage
of assembly because coloring becomes more diffi-
cult once parts are assembled.
- 2 -
1 Assembling the Front Cowl
First, assemble each component by following the
working method and markings. Then, refer to the il-
lustration and photos below to glue the parts together.
Indication of
Working Methods
Fold or Curve
Adhere
FRONT COWL
Sheet A, 10 parts in total
Please use the dots on each component as reference when gluing surfaces.
A-
6
A-
3
Glue this section from
the inside of A-1.
A-
7
A-
8
A-
2
A-
9
A-
10
A-
1
A-
5
A-
4
A-
1
Reference photo
Fold the parts as shown above so that the dotted lines on
the gluing surfaces are lined up before gluing each sec-
tion.
- 3 -
2 Assembling the Steering
First, assemble each component by following the
working method and markings. Then, refer to the il-
lustration and photos below to glue the parts together.
Indication of
Working Methods
Fold or Curve
Adhere
STEERING
Sheet B, 18 parts in total
B-
18
Please use the dots on each component as
reference when gluing surfaces.
B-
2
B-
1
B-
3
B-
4
B-
8
Fold the parts as shown above so that
the dotted lines on the gluing surfaces
are lined up before gluing each section.
B-
5
B-
9
B-
7
B-
6
B-
10
B-
11
Be careful not to leave any glue on B-5,
8 and 9 when inserting B-10 and 11.
Apply glue on the area
indicated in the illustration.
Reference photo
B-
18
B-
12
B-
13
B-
14
B-
15
B-
16
B-
17
- 4 -
3 Assembling the Frame
First, assemble each component by following the
working method and markings. Then, refer to the il-
lustration and photos below to glue the parts together.
Indication of
Working Methods
Fold or Curve
Adhere
FRAME
Sheet C (x2), 23 parts in total
After assembling both Frames A and B, glue the two on the gluing surface shown below.
Please use the dots on each component as reference when gluing surfaces.
[Frame A]
Gluing surface
(to Frame B)
C-
1
C-
1
C-
5
C-
6
Crease well in this area on
both sides of the component.
C-
2
Fold the parts as shown above so that
corresponding gluing areas are lined up
before gluing each section.
C-
4
C-
3
Be sure to assemble in
the right direction
C-
7
C-
11
C-
12
Be sure to assemble in
the right direction
[Frame B]
C-
8
Be sure to assemble in
the right direction
C-
15
C-
16
C-
17
C-
13
C-
14
Gluing surface
(to Frame A)
C-
9
C-
10
C-
18
C-
19
C-
20
C-
21
C-
22
Reference photo
C-
23
- 5 -
Plik z chomika:
sliwzehl
Inne pliki z tego folderu:
accessory_full.pdf
(542 KB)
accessory_assembly_full.pdf
(331 KB)
cmn_pic_001.jpg
(29 KB)
yzf-r1_white_full.pdf
(624 KB)
yzf-r1_color_full.pdf
(863 KB)
Inne foldery tego chomika:
dsc11
mt-01
sr400
tmax
vespa 150
Zgłoś jeśli
naruszono regulamin