small-bookcase.pdf

(218 KB) Pobierz
Text.PDF
ookcase
Everyone can use just
one more bookcase.
This one is just the right height
to place next to a bed, in a
bathroom, or (as we did) on a
lonely wall in the dining room.
It is only a foot deep, so it will
hold lots of items without
interfering in high-traffic areas.
Materials List
  12 linear feet of 1 x 12 pine
  4 wooden circles,
approximately 3-1/2" in
diameter
  Cutting List
Hardware
  32 1-1/2" screws
1
B
108204269.044.png 108204269.045.png 108204269.046.png 108204269.047.png 108204269.001.png 108204269.002.png 108204269.003.png 108204269.004.png 108204269.005.png 108204269.006.png 108204269.007.png 108204269.008.png 108204269.009.png 108204269.010.png 108204269.011.png 108204269.012.png 108204269.013.png 108204269.014.png 108204269.015.png 108204269.016.png 108204269.017.png 108204269.018.png 108204269.019.png 108204269.020.png 108204269.021.png 108204269.022.png 108204269.023.png 108204269.024.png 108204269.025.png 108204269.026.png 108204269.027.png 108204269.028.png 108204269.029.png 108204269.030.png 108204269.031.png 108204269.032.png 108204269.033.png 108204269.034.png 108204269.035.png 108204269.036.png 108204269.037.png 108204269.038.png 108204269.039.png 108204269.040.png
Cutting List
Code Description Qty. Materials
Dimensions
A Top/Bottom
2 1 x 12 pine
30” long
B Sides
2 1 x 12 pine
24” long
C Shelf
1 1 x 12 pine
28-1/2” long
D Feet
4 Wooden circles 3-1/2” in diameter
Assembling the Bookcase
1. Cut two top/bottoms (A) from 1 x 12 pine, each measuring 30 inches long.
Figure 1
2
108204269.041.png 108204269.042.png
2. Cut two sides (B) from 1 x 2 pine, each measuring 24 inches long.
3. Place the two top/bottoms (A) parallel to each other and 24 inches apart. Fit the two sides (B)
between the top/bottoms (A), as shown in Figure 1 . Screw through the top/bottoms (A) into
the ends of the sides (B). Use four 1-1/2-inch screws on each of the four joints.
Figure 2
4. Cut one shelf (C) from 1 x 12 pine, measuring 28-1/2 inches long.
5. Fit the shelf (C) into the assembly, as shown in Figure 2. Pick the best-looking top/bottom
surface and designate it as the “top” of the assembly. We placed our shelf 9 inches from the
“top,” but that measurement can be altered as you wish. Screw through the sides (B) into the
3
108204269.043.png
ends of the shelf (C). Use four 1-1/2-inch screws on each of the two joints.
6. Screw the four feet (D) onto the bottom, even with the outside edges of the completed
bookcase using 1-1/2” screws.
Finishing
1. Fill the screw holes, crevices, and cracks with wood filler.
2. Sand all surfaces of the completed bookcase.
3. Stain or paint the bookcase the color of your choice. We chose to retain the natural color of
the pine and simply seal it with a glossy polyurethane.
4

Plik z chomika:

Inne pliki z tego folderu:

Inne foldery tego chomika:

Zgłoś jeśli naruszono regulamin