PERI_Trio-H_A.pdf

(4487 KB) Pobierz
U1
TRIO-H
The TRIO version for
housing construction
394107123.020.png
Edition 07/2007
PERI GmbH
P.O. Box 12 64
89259 Weissenhorn
Tel.: 0 73 09 / 9 50-0
Fax: 0 73 09 / 9 51-0
info@peri.de
www.peri.de
Important notes:
Our products are to be used in accordance with
the relevant state and national safety regulations.
The illustrations in this brochure are just
photographs of the situation on a site at a
particular moment. Safety or formwork anchora-
ge details are therefore not to be taken as a defi-
nitive guide to the way the equipment is to be
used.
Safety precautions and allowable loads are to be
observed exactly. Separate structural calculations
are required for any changes and deviations.
Subject to technical change in the interest of
progress.
394107123.021.png 394107123.022.png 394107123.023.png 394107123.001.png 394107123.002.png
Contents
Page
TRIO-H
The TRIO version for housing construction
2 - 3
Safe and efficient working
4 - 5
Fast solutions for all construction sites
6 - 7
Product programme
8 - 17
PERI International
20 - 21
1
394107123.003.png 394107123.004.png 394107123.005.png 394107123.006.png 394107123.007.png
TRIO-H
Formwork for housing construction
Extremely short formworking times
- all formwork activities, such as
element connections, crane lifts and
ties, are carried out on the ground
- only 1 tie required up to 3.00 m concre-
ting height (2.70 m 2 wall area per tie)
- large-sized elements with a 13.50 m 2
maximum (5.40 m wide, 2.70 m high)
- securely mounted, foldable concre-
ting platforms with integrated guar-
drails and access ladder
- securely attached crane lifting units on
every element makes moving easier
- accessory boxes for ties, connecting
elements and other accessories.
Safe working conditions
through securely mounted
platforms and access
ladder.
High-grade surface quality
- only 1 tie required up to 3.00 m con-
creting height
- large-sized elements (max. 13.50 m 2 )
for an architectural concrete finish
which is ready for wallpapering
- plywood is screwed on from the rear
that leaves no unsightly screw or nail
impressions
Corners and filler spaces
are formed with standard
TRIO elements.
2
394107123.008.png 394107123.009.png 394107123.010.png 394107123.011.png 394107123.012.png
Only I tie through the concrete
- the screw tie, inserted from one
side, makes the PERI TRIO-H
especially fast
- spacer tubes and compression
cones are not required.
The tie is inserted from the
inner side and turned as far
as it will go – that´s all!
TRH Ties 15-30/99
Wall thicknesses are pre-adjusted in
10 mm increments.
Higher permissible fresh con-
crete pressure
TRIO-H carries the full hydrostatic
pressure of 75.0 kN/m 2 for concre-
ting heights up to 3.00 m (height
extensions with 30 cm TRIO ele-
ments). And this with only one
tie through the concrete.
10 mm
The cone-shaped tie ensures
easy striking. Only one turn
and the tie is loosened.
Shuttered
Struck
Wall thickness
15 cm – 30 cm
Clearly visible – the conically
formed tie hole.
3
394107123.013.png 394107123.014.png 394107123.015.png 394107123.016.png 394107123.017.png 394107123.018.png 394107123.019.png

Plik z chomika:

Inne pliki z tego folderu:

Inne foldery tego chomika:

Zgłoś jeśli naruszono regulamin