Dictionary of Pictograph Symbols (1).pdf

SAFETY.CAT.COM™

DICTIONARY OF

PICTOGRAPH SYMBOLS

Excerpted from Operation & Maintenance Manual (SEBD0400-03-01)

i01658146

Important Safety Information

Most accidents that involve product operation, maintenance and repair are caused by failure to

observe basic safety rules or precautions. An accident can often be avoided by recognizing potentially

hazardous situations before an accident occurs. A person must be alert to potential hazards. This

person should also have the necessary training, skills and tools to perform these functions properly.

Improper operation, lubrication, maintenance or repair of this product can be dangerous and

could result in injury or death.

Do not operate or perform any lubrication, maintenance or repair on this product, until you have

read and understood the operation, lubrication, maintenance and repair information.

Safety precautions and warnings are provided in this manual and on the product. If these hazard

warnings are not heeded, bodily injury or death could occur to you or to other persons.

The hazards are identified by the “Safety Alert Symbol” and followed by a “Signal Word” such as

“DANGER”, “WARNING” or “CAUTION”. The Safety Alert “WARNING” label is shown below.

The meaning of this safety alert symbol is as follows:

Attention! Become Alert! Your Safety is Involved.

The message that appears under the warning explains the hazard and can be either written or

pictorially presented.

Operations that may cause product damage are identified by “NOTICE” labels on the product and in

this publication.

Caterpillar cannot anticipate every possible circumstance that might involve a potential hazard. The

warnings in this publication and on the product are, therefore, not all inclusive. If a tool, procedure,

work method or operating technique that is not specifically recommended by Caterpillar is used,

you must satisfy yourself that it is safe for you and for others. You should also ensure that the

product will not be damaged or be made unsafe by the operation, lubrication, maintenance or

repair procedures that you choose.

The information, specifications, and illustrations in this publication are on the basis of information that

was available at the time that the publication was written. The specifications, torques, pressures,

measurements, adjustments, illustrations, and other items can change at any time. These changes can

affect the service that is given to the product. Obtain the complete and most current information before

you start any job. Caterpillar dealers have the most current information available.

When replacement parts are required for this

product Caterpillar recommends using Caterpil-

lar replacement parts or parts with equivalent

specifications including, but not limited to, phys-

ical dimensions, type, strength and material.

Failure to heed this warning can lead to prema-

ture failures, product damage, personal injury or

death.

Table of Contents

Systems Operation Section

General Information .............................................. 4

Agricultural Tractors .............................................. 4

Basic ..................................................................... 10

Brake System ....................................................... 12

Clamshell Bucket .................................................. 14

Climate Control ..................................................... 15

Dozer .................................................................... 17

Dumper and Hauler .............................................. 19

Earthmoving Grapple ............................................ 20

Electrical System ................................................. 21

Engine ................................................................... 23

Excavator and Backhoe ........................................ 29

Excavator and Shovel ........................................... 33

Felling ................................................................... 33

Fuel System ......................................................... 34

General ................................................................. 36

Grader ................................................................... 46

Hydraulic System ................................................. 48

Lighting ................................................................. 51

Loader ................................................................... 53

Load Handling ....................................................... 57

Log Handling ......................................................... 58

Material Handling .................................................. 60

Paving ................................................................... 61

Ripper ................................................................... 64

Safety .................................................................... 64

Saw Unit ............................................................... 66

Scraper ................................................................. 67

Seat ...................................................................... 68

Stabilizer System .................................................. 70

Telehandler ........................................................... 71

Track Type Tractor ................................................. 72

Transmission ........................................................ 73

Tree Harvester and Feller Buncher ....................... 77

Winch .................................................................... 78

Window and Visibility ............................................ 80

Index Section

Index ..................................................................... 82

Systems Operation Section

i01781281

Tractor-Ground Speed – g00694013

General Information

SMCS Code: 7000

This manual is a listing of the pictrographs

and symbols that are used by Caterpillar. The

pictographs are sorted by application.

Tractor With Front PTO- Side View Of

Machine – g00694018

i01552781

Agricultural Tractors

Tractor With Rear PTO- Side View Of

Machine – g00694129

SMCS Code: 7000

Level Adjustment - Operator Compartment

Left – g00693988

Tractor With Front PTO- Overhead View Of

Machine – g00694130

Level Adjustment - Operator Compartment

Right – g00693989

Tractor With Rear PTO- Overhead View Of

Machine – g00694132

Work Distance Traveled – g00693990

Tractor With Towed Implement-Row

Guidance – g00694147

Rockshaft - Upper Limit – g00693999

Implement Width – g00694151

Rockshaft - Lower Limit – g00694000

Four-Wheel Drive – g00694154

Rockshaft - Depth Control - Maximum

Depth – g00694009

Area Worked – g00694158

Rockshaft - Depth Control - Minimum

Depth – g00694011

Systems Operation Section

Area Worked Per Hour – g00694162

PTO/Power Take-Off – g00694201

Rockshaft-Basic – g00694172

PTO/Power Take-Off-Rotational Speed –

g00694624:

Rockshaft-Up/Raise – g00694174

Tractor- Wheel Slip – g00694625

Rockshaft-Down/Lower – g00694177

Tractor-Basic- Side View – g00694626

Rockshaft- Float – g00694181

Tractor- Forward Movement- Side View –

g00694627

Remote Cylinder- Basic – g00694183

Tractor- Rearward Movement- Side View –

g00694628

Remote Cylinder- Extend – g00694185

Tractor- Basic- Overhead View –

g00694629

Remote Cylinder- Retract – g00694189

Tractor- Forward Movement- Overhead

View – g00694630

Remote Cylinder- Float – g00694193

Tractor- Rearward Movement- Overhead

View – g00694633

Differiential Lock – g00694199

Tractor- Auxilary Headlights – g00694634

Plik z chomika:

Inne pliki z tego folderu:

Inne foldery tego chomika: