README.TXT

*************************************************************************   
*   Steinberg SMP 24/2  Windows 95 Multimedia Driver Installation       *
*************************************************************************   

  THIS DRIVER DO NOT WORK WITH A STANDARD BIDIRECTIONAL PARALLEL PORT.  


  To configure Windows for Steinberg SMP 24/2, perform the following:

2. SETUP WINDOWS 95
=====================

  1.      Run Windows 95

  2.      Click the Start button on the Taskbar.

  3.      From the menu that appears, select "Settings" and then "Control Panel".

  4.      In the Control Panel, double click on "Add New Hardware".

  5.      Click the "Next" button.

  6.      Click "No".

  7.      Click "Next".

  8.      In the list that appears, select "Sound, video and game controllers" 
          and click "Next".

  9.      Click "Have Disk".

  10.     Insert the floppy disk with the SMP interface driver on, into the 
          disk drive. Select Drive A: or Drive B: (the drive, which contains 
          your driver disk), change the directory to "\WIN95" and click OK.

  11.     In the Select Device window that appears, make sure the correct interface 
          is selected ('Steinberg SMP 2(4) - SMP Parallel Port') in the list, and 
          click OK.

  12.     Click "Next".

  13.     Restart Windows 95.



  => Making Base Address and IRQ Settings <=
     ====================================

  If the Base Address and IRQ (or other) settings on the MIDI interface do not match 
  the settings in Windows, your MIDI Interface will not function properly. 
  Furthermore, if two MIDI (or other) interfaces in your computer use the same base 
  address and/or IRQ, you might get other problems with your computer (it might not 
  run properly at all!). Therefore it is very important to make sure that the settings 
  on the SMP interface are really in accordance with the setting in Windows and that 
  the SMP interface does not "conflict" with any other hardware in your computer.

  1.      Click the Start button on the Taskbar.

  2.      From the menu that appears, select "Settings" and then "Control Panel".

  3.      In the Control Panel, double click on "System".

  4.      Click the "Device Manager" tab at the top.

  5.      Click the "+" button just before the 
          text "Sound, video and game controllers", in the list.

  6.      Select the SMP driver in the indented list that appears 
          and click "Properties".

  7.      Click the "Resources" tab at the top.

  8.      Change the Baseadress or IRQ settings.

  9.      If the Hardware Settings have been changed restart Windows 95


  => Synchronization <=
     ===============

  If you want to use the the SMP 24/2 Synchronization facilities 
  repeat point 1 to 6 and click the "Setup SMP" tab at the top.

  The driver provides one MIDI input "SMP SMPTE" for MIDI timecode 
  via "SMPTE IN" from the SMP 24/2. Mark the "Receive SMPTE" field to 
  activate this input.
  If you want to write SMPTE via "SMPTE OUT" edit the "SMPTE offset" 
  field and press the "Start" button in the "Write SMPTE" box of 
  the dialog.
  You can also choose the framerate for receiving and writing SMPTE.    


*************************************************************************   


Steinberg On-Line
=================

  Steinberg On-Line Support currently only exists on CompuServe. 
  The Compuserve command is GO MIDICVEN. For those that wish to 
  communicate in German the command is GO PCIND.

  Email to the support team on Compuserve:
	  71333.2052 for international support (english).
	  74431.604  for german support (german).

  or via the Internet:
	  71333.2052@compuserve.com for international support.
	  74431.604@compuserve.com  for german support.