WinAC_MP_e.pdf

Preface, Contents

Product Overview

SIMATIC

Transferring WinAC MP

to the Multi Panel

Developing and

Downloading a STEP 7

Project for WinAC MP

WinAC MP for MP370 V3.1

User Manual

Controlling Your Process

with WinAC MP

Customizing WinAC MP

for Your Application

Reference

Index

A5E00299232-01

This manual contains notices that you should observe to ensure your own personal safety, as well as to

protect the product and connected equipment. These notices are highlighted in the manual by a warning

triangle and are marked as follows according to the level of danger:

Danger

Indicates an imminently hazardous situation that, if not avoided, will result in death or serious injury.

Warning

Indicates a potentially hazardous situation that, if not avoided, could result in death or severe injury.

Caution

Used with the safety alert symbol indicates a potentially hazardous situation that, if not avoided, may result in

minor or moderate injury.

Caution

Used without the safety alert symbol indicates a potentially hazardous situation that, if not avoided, may result

in property damage.

Notice

NOTICE used without the safety alert symbol indicates a potential situation that, if not avoided, may result in an

undesirable result or state.

Qualified Personnel

The device/system may only be set up and operated in conjunction with this manual. Only qualified

personnel should be allowed to install and work on this equipment. Qualified persons are defined as persons

who are authorized to commission, to ground, and to tag circuits, equipment, and systems in accordance

with established safety practices and standards.

Correct Usage

Note the following:

Caution

This device and its components may only be used for the applications described in the catalog or

the technical descriptions and only in connection with devices or components from other

manufacturers that have been approved or recommended by Siemens.

This product can only function correctly and safely if it is transported, stored, set up, and installed

correctly, and operated and maintained as recommended.

Trademarks

Siemens®, SIMATIC®, HMI®, MP370®, and ProTool® are registered trademarks of SIEMENS AG.

WinAC MP™ is a trademark of SIEMENS AG. ActiveX® and Windows® are trademarks of Microsoft

Corporation.

Other designations used in this document are also registered trademarks; the owner’s rights may be

be violated if they are used by third parties for their own purposes.

The reproduction, transmission or use of this document or

its contents is not permitted without express written

authority. Offenders will be liable for damages. All rights,

including rights created by patent grant or registration of a

utility model or design, are reserved.

Disclaimer of Liability

We have checked the contents of this manual for agreement

with the hardware and software described. Since deviations

cannot be precluded entirely, we cannot guarantee full

agreement. However, the data in this manual are reviewed

regularly and any necessary corrections included in

subsequent editions. Suggestions for improvement are

welcomed.

Siemens Energy & Automation,PCbA

755 College Road East

Princeton, NJ 08540, USA

Technical data subject to change.

Preface

WinAC MP is a software S7 PLC for the SIMATIC MP370 12” keyboard multi panel and the

MP370 Touch 12” and 15” multi panels that you can use to control a network of PROFIBUS-DP

devices. ProTool works with WinAC MP to provide process visualization and control.

WinAC MP consists of the following elements:

WinAC MP controller software for the MP370 and MP370 12” and 15” Touch multi panels

STEP 7 project for WinAC MP

ProTool projects for MP370 and MP370 12” and 15” Touch multi panels with WinAC MP

example screens, and add-in WinAC MP components for ProTool CS

SIMATIC WinAC MP for MP370 User Manual (electronic)

Authorization diskette

Software Product Sheet

Audience

This manual is intended for engineers, programmers, and maintenance personnel who have a

general knowledge of SIMATIC programmable logic controllers. Knowledge of STEP 7

programming, ProTool, and WinAC is also required.

Scope of the Manual

This manual describes the features and the operation of version 3.1 of WinAC MP.

How to Use This Manual

This manual provides the following information:

Product Overview

Transferring WinAC MP to the Multi Panel

Developing and Downloading a STEP 7 Project for WinAC MP

Controlling Your Process with WinAC MP

Customizing WinAC MP for Your Application

Reference Information

Other Manuals

For additional information, refer to the following manuals:

Related Manuals

Title

Content

STEP 7 User Manual

Provides information on programming in STEP 7.

ProTool User Manuals

Provide basic information about the configuration of ProTool user

interface screens and ProTool on the multi panel.

SIMATIC NET User Manual

Provides information on communication and networking with

SIMATIC NET.

iii

Preface

Contacting Customer Support

You can find additional information about WinAC MP and updates to this user manual at the

Siemens Energy & Automation web site:

www.sea.siemens.com/software

This web site includes useful information, such as application notes, in the Technical Service

area.

Customer Support

North America

Telephone

(423) 262-2522

E-mail

simatic.hotline@sea.siemens.com

Internet

http://www.sea.siemens.com

Europe

Telephone

++49 (0) 180 5050 222

E-Mail

support@siemens.com

Internet

http://www.ad.siemens.de/support

Fax

++49 (0) 180 5050 223

Asia

Telephone

++86 1064 757575

E-Mail

adsupport.asia@siemens.com

Internet

http://www.ad.siemens.de/meta/karten/html_76/welt.htm

Fax

++86 10 64 747474

Contents

Product Overview ............................................................................................... 1

System Requirements ................................................................................................... 1

Installation and Transfer Tasks...................................................................................... 2

Screens Provided by the ProTool Example Projects ..................................................... 4

Compatibility .................................................................................................................. 6

What’s New?.................................................................................................................. 6

Transferring WinAC MP to the Multi Panel ....................................................... 7

Setting Parameters for Communications ....................................................................... 8

Using the Remote Control Option ............................................................................................. 8

Connecting the Configuration Computer to the Multi Panel...................................................... 9

Establishing Ethernet Communication ................................................................................................ .9

Establishing Serial Communication.................................................................................................... 10

Establishing MPI/PROFIBUS Communication .................................................................................. .11

Establishing USB Communication ..................................................................................................... 12

Downloading WinAC MP Runtime Files ...................................................................... 13

Downloading Authorization for WinAC MP .................................................................. 15

Downloading a WinAC MP Example ProTool Project.................................................. 16

Opening a ProTool Example Project...................................................................................... .16

Downloading an Example Project .......................................................................................... .17

Getting Started with WinAC MP on the Multi Panel ..................................................... 18

Starting the ProTool Project on the Multi Panel ...................................................................... 18

Starting the WinAC MP Controller.......................................................................................... .18

Shutting Down the WinAC MP Controller............................................................................... .18

Exiting the ProTool Project...................................................................................................... 18

The Difference Between Shutting Down WinAC MP and Exiting ProTool.............................. 18

Restrictions when the Controller Is Running .......................................................................... .19

Removing WinAC MP .................................................................................................. 20

Removing Authorization for WinAC MP from the Multi Panel ................................................. 20

Removing WinAC MP from the Multi Panel ........................................................................... .21

Removing WinAC MP from the Configuration Computer....................................................... .21

Developing and Downloading a STEP 7 Project for WinAC MP.................... 23

Configuring the Multi Panel Communication Settings.................................................. 23

Creating and Configuring a STEP 7 Project ................................................................ 23

STEP 7 Connection Options .................................................................................................. .24

Configuring the SIMATIC PC Station and the PROFIBUS-DP Network ...................... 25

Configuring a SIMATIC PC Station for a new STEP 7 Project ............................................... 25

Plik z chomika:

Inne pliki z tego folderu:

Inne foldery tego chomika: