WInACTime_Synch_e.pdf

Preface, Contents

Product Overview

Installation of WinAC Time

Synchronization Software

SIMATIC

Assignment of a CP

Windows Automation Center

WinAC Time Synchronization

Operation of WinAC Time

Synchronization

Getting Started

Operating Manual

Index

Edition 08/2005

A5E00449689-01

Safety Guidelines

This manual contains notices you have to observe in order to ensure your personal safety, as well as to

prevent damage to property. The notices referring to your personal safety are highlighted in the manual

by a safety alert symbol, notices referring to property damage only have no safety alert symbol. The

notices shown below are graded according to the degree of danger.

Danger

indicates that death or severe personal injury will result if proper precautions are not taken.

Warning

indicates that death or severe personal injury may result if proper precautions are not taken.

Caution

with a safety alert symbol indicates that minor personal injury can result if proper precautions are not

taken.

Caution

without a safety alert symbol indicates that property damage can result if proper precautions are not

taken.

Attention

indicates that an unintended result or situation can occur if the corresponding notice is not taken into

account.

If more than one degree of danger is present, the warning notice representing the highest degree of

danger will be used. A notice warning of injury to persons with a safety alert symbol may also include a

warning relating to property damage.

Qualified Personnel

The device/system may only be set up and used in conjunction with this documentation. Commissioning

and operation of a device/system may only be performed by qualified personnel . Within the context of

the safety notices in this documentation qualified persons are defined as persons who are authorized to

commission, ground and label devices, systems and circuits in accordance with established safety

practices and standards.

Prescribed Usage

Note the following:

Warning

This device and its components may only be used for the applications described in the catalog or the

technical description, and only in connection with devices or components from other manufacturers

which have been approved or recommended by Siemens.

Correct, reliable operation of the product requires proper transport, storage, positioning and assembly

as well as careful operation and maintenance.

Trademarks

All names identified by ® are registered trademarks of the Siemens AG.

The remaining trademarks in this publication may be trademarks whose use by third parties for their

own purposes could violate the rights of the owner.

Disclaimer of Liability

We have reviewed the contents of this publication to ensure consistency with the hardware and

software described. Since variance cannot be precluded entirely, we cannot guarantee full consistency.

However, the information in this publication is reviewed regularly and any necessary corrections are

included in subsequent editions.

A5E00449689

Edition 08/2005

Siemens AG 2005

Technical data subject to change.

Siemens AG

Automation and Drives

Postfach 4848

90437 NÜRNBERG

GERMANY

Preface

Purpose of this Documentation

This documentation provides a complete overview of time synchronization with

WinAC. It serves as an aid during software installation and commissioning.

The documentation is intended for programmers and persons involved in

configuring, commissioning, and servicing automation systems.

For first-time users, we recommend that you start with the Getting Started section.

Prerequisites

Persons using this manual should have a general knowledge of automation

engineering.

In addition, users should be proficient in the use of:

• Computers or similar devices (e.g., programming devices) with the

Windows 2000 or Windows XP operation system

• PC-based automation (WinAC RTX, WinAC Slot)

• STEP 7

Scope

This documentation applies to WinAC Time Synchronization Version 4.0 or higher .

Location of Documentation

This manual is part of the documentation package for

• WinAC RTX 2005, Version WinLC RTX V4.2 and higher

• WinAC Slot V4.0 and higher

Additional Support

If you have any questions on the products described in the manual, please contact

your Siemens representative.

To locate your Siemens representative, go to:

http://www.siemens.com/automation/partner

To see a list of available documentation on specific SIMATIC products and

systems, go to:

http://www.siemens.de/simatic-tech-doku-portal

For the online catalog and ordering system, go to:

http://mall.automation.siemens.com/

WinAC Time Synchronization

Operating Manual, 08/2005, A5E00449689-01

iii

Preface

Training Center

We offer a variety of courses to help you get started working with SIMATIC S7.

Please contact your regional training center or our main training center in D 90372

Nuremberg for more information.

Phone: +49 (911) 895-3200

Internet: http://www.sitrain.com

Technical Support

You can obtain technical support for all A&D products as follows:

• By filling out a Support Request at

http://www.siemens.de/automation/support-request

• By phone: + 49 180 5050 222

• By fax: + 49 180 5050 223

For additional information regarding Technical Support, go to

http://www.siemens.de/automation/service

Service & Support on the Internet

In addition to documentation, our complete knowledge base is available online at

http://www.siemens.com/automation/service&support

There you will find:

• Newsletters containing the latest information on your products

• A search function for locating the documentation you need

• A forum where users and experts from around the world exchange information

• A list of local Automation & Drives representatives

• Information on local service, repairs, spare parts, and much more is available

under "Services".

WinAC Time Synchronization

Operating Manual, 08/2005, A5E00449689-01

Table Of Contents

1 Product Overview........................................................................................................... 1-1

2 Installation of WinAC Time Synchronization Software .............................................. 2-1

3 Assignment of a CP ....................................................................................................... 3-1

3.1 Configuration of Time Synchronization Interface ............................................. 3-1

3.2 Configuring the Driver....................................................................................... 3-2

3.3 Set PG/PC Interface ......................................................................................... 3-3

4 Operation of WinAC Time Synchronization ................................................................ 4-1

4.1 Starting and Stopping WinAC Time Synchronization ....................................... 4-1

4.2 Setting the Language........................................................................................ 4-4

4.3 About WinAC Time Synchronization ................................................................ 4-5

5 Getting Started ............................................................................................................... 5-1

5.1 Time Synchronization Task .............................................................................. 5-1

5.2 Step 1: Assign Station Name with the Station Configuration Editor ................. 5-2

5.3 Step 2: Configure the CP 1613......................................................................... 5-3

5.4 Step 3: Create Project ...................................................................................... 5-6

5.5 Step 4: Hardware Configuration of Box PC 620 PC Station............................. 5-7

5.6 Step 5: Set the Synchronization Mode in the Controller................................. 5-10

5.7 Step 6: Hardware Configuration of S7-400 Station ........................................ 5-11

5.8 Step 7: Set Time Synchronization on the CP 443-1....................................... 5-12

5.9 Step 8: Set Synchronization Mode and Time Interval in the CPU 416-2 DP . 5-13

5.10 Step 9: Configure the Access Point................................................................ 5-14

Index ................................................................................................................................. .Index-1

WinAC Time Synchronization

Operating Manual, 08/2005, A5E00449689-01

Plik z chomika:

Inne pliki z tego folderu:

Inne foldery tego chomika: