Eagle_Server_Installation_Guide.pdf

(1975 KB) Pobierz
PC minimum requirements
Eagle Server Installation Guide
PC minimum requirements
CPU: Minimum Pentium 3 or equivalent
RAM: Minimum 512 MB, 768MB for VMWare (1 GB recommended)
HDD: Minimum 15 GB (4 GB required to install Eagle-server on HDD)
CD-ROM: Minimum 10x CD-ROM
Run Eagle-Server from the CD (1)
1. Ensure PC is set to boot from the CD-ROM first. Change BIOS settings if necessary.
2. Place the Eagle Server CD into the tray of the PC.
3. Restart the PC.
ISOLINUX 3.07 2005-01-12 Copyright (C) 1994-2005 H. Peter Avin
Exploration Server Copyright (C) 2006, 2007 GNU
Press <F1> key for brief description of services.
Press <ENTER> to continue - Exploration Server options will be displayed.
boot:
4. At the Exploration Server prompt, press <Enter> to boot.
This is the Linux Live CD for CCNA Exploration Server.
If you have any questions, contact lee w toderick (toderickl@ecu.edu).
-------------------------------------------------------------------------------
help ) License and warranty information, and terse description of these options.
installEXT ) Install Eagle-Server onto an existing Linux empty disk partition.
installonFAT ) Install Eagle-Server on a free windows FAT partition (4GB Min).
runondisk ) Reboot Eagle-Server from FAT partition.
reboot ) Eject the CD and Reboot.
halt ) Halt the system.
-------------------------------------------------------------------------------
1 ) Run Linux from CD with /var in RAM <== **CHANGES MADE WIL NOT BE SAVED
-------------------------------------------------------------------------------
Option: 1
5. After the drivers and settings are loaded, select option " 1 ” to run the Linux software
program from the CD and RAM.
6. Eagle server software has a pre-configured IP address of 192.168.254.254.
Top
1 of 21
671389913.002.png
Eagle Server Installation Guide
Install Eagle-Server to a Linux disk partition (installEXT)
This option is for use on a Linux computer with a unused EXT2 or EXT3 partition.
1. Reboot from the Eagle Server CD.
ISOLINUX 3.07 2005-01-12 Copyright (C) 1994-2005 H. Peter Avin
Exploration Server Copyright (C) 2006, 2007 GNU
Press <F1> key for brief description of services.
Press <ENTER> to continue - Exploration Server options will be displayed.
boot:
2. At the opening screen press <Enter> . This will load the Linux kernel.
This is the Linux Live CD for CCNA Exploration Server.
If you have any questions, contact lee w toderick (toderickl@ecu.edu).
-------------------------------------------------------------------------------
help ) License and warranty information, and terse description of these options.
installEXT ) Install Eagle-Server onto an existing Linux empty disk partition.
installonFAT ) Install Eagle-Server on a free windows FAT partition (4GB Min).
runondisk ) Reboot Eagle-Server from FAT partition.
reboot ) Eject the CD and Reboot.
halt ) Halt the system.
-------------------------------------------------------------------------------
1 ) Run Linux from CD with /var in RAM <== **CHANGES MADE WIL NOT BE SAVED
-------------------------------------------------------------------------------
Option: installEXT
3. Type menu option installEXT and press < Enter> .
Disk /dev/sda: 250.0 GB, 250000000000 bytes
Device Boot Start End Blocks ID System
/dev/sda1 * 1 3908 31390978+ 83 Linux
/dev/sda2 3909 5124 9767520 83 LInux
/dev/sda3 5125 22510 139653045 5 Extended
/dev/sda4 22511 30394 63328230 83 Linux
/dev/sda5 5125 22145 136721151 83 Linux
/dev/sda6 22146 22510 2931831 82 Linux swap
To which partition do you wish to install the eagle-server files?
Enter device name: /dev/sda2
Proceed with installation on /dev/sda2? (y/n) y
4. All the available partitions will be listed and you will be prompted to “Enter device name:”
Enter the partition name exactly as you see it. For example, you would enter “ /dev/sda2 ”
without the quotes if you wanted to install the Eagle-Server on the second partition. You
can only enter a partition name that is listed.
2 of 21
671389913.003.png
Eagle Server Installation Guide
5. You are prompted to continue. Important: This is your last chance to quit. If you continue,
ALL INFORMATION ON THE SELECTED PARTITION WILL BE ERASED . If you
want to proceed with the install type “ y ” and press < Enter >.
6. The installation will take approximately 15 minutes, depending on the speed of the CD. You
will be prompted to press < Enter > to return to the menu.
This is the Linux Live CD for CCNA Exploration Server.
If you have any questions, contact lee w toderick (toderickl@ecu.edu).
-------------------------------------------------------------------------------
help ) License and warranty information, and terse description of these options.
installEXT ) Install Eagle-Server onto an existing Linux empty disk partition.
installonFAT ) Install Eagle-Server on a free windows FAT partition (4GB Min).
runondisk ) Reboot Eagle-Server from FAT partition.
reboot ) Eject the CD and Reboot.
halt ) Halt the system.
-------------------------------------------------------------------------------
1 ) Run Linux from CD with /var in RAM <== **CHANGES MADE WIL NOT BE SAVED
-------------------------------------------------------------------------------
Option: reboot
7. Type “ reboot ” and press < Enter >. The CD will be ejected. Remove it and the PC will
reboot to disk.
8. If the PC boots directly to the Eagle-Server without displaying the grub boot menu, please
read the Linux Grub Information section below.
Top
3 of 21
671389913.004.png
Eagle Server Installation Guide
Install Eagle-Server on a Windows FAT partition (installonFAT)
1. Create and format a 4 GB FAT file system partition (not NTFS) on a MS Window PC hard
drive. IMPORTANT: This option will overwrite your Windows partition if a second
partition is not created! Disk partition utilities are available from the Internet. How to
create a second FAT partition is beyond the scope of this document.
2. Reboot from the Eagle Server CD.
ISOLINUX 3.07 2005-01-12 Copyright (C) 1994-2005 H. Peter Avin
Exploration Server Copyright (C) 2006, 2007 GNU
Press <F1> key for brief description of services.
Press <ENTER> to continue - Exploration Server options will be displayed.
boot:
3. At the opening screen press <Enter> . This will load the Linux kernel.
This is the Linux Live CD for CCNA Exploration Server.
If you have any questions, contact lee w toderick (toderickl@ecu.edu).
-------------------------------------------------------------------------------
help ) License and warranty information, and terse description of these options.
installEXT ) Install Eagle-Server onto an existing Linux empty disk partition.
installonFAT ) Install Eagle-Server on a free windows FAT partition (4GB Min).
runondisk ) Reboot Eagle-Server from FAT partition.
reboot ) Eject the CD and Reboot.
halt ) Halt the system.
-------------------------------------------------------------------------------
1 ) Run Linux from CD with /var in RAM <== **CHANGES MADE WIL NOT BE SAVED
-------------------------------------------------------------------------------
Option: installFAT
4. Type menu option installonFAT . Follow the instructions that are displayed. The installation
will take approximately 15 minutes, depending on the speed of the CD.
5. Leave the CD in the tray, required to access the server partition when the computer is
rebooted.
This is the Linux Live CD for CCNA Exploration Server.
If you have any questions, contact lee w toderick (toderickl@ecu.edu).
-------------------------------------------------------------------------------
help ) License and warranty information, and terse description of these options.
installEXT ) Install Eagle-Server onto an existing Linux empty disk partition.
installonFAT ) Install Eagle-Server on a free windows FAT partition (4GB Min).
runondisk ) Reboot Eagle-Server from FAT partition.
reboot ) Eject the CD and Reboot.
halt ) Halt the system.
-------------------------------------------------------------------------------
1 ) Run Linux from CD with /var in RAM <== **CHANGES MADE WIL NOT BE SAVED
-------------------------------------------------------------------------------
Option: runondisk
6. When the server is rebooted, press <Enter> and type menu option runondisk .
Top
4 of 21
671389913.005.png
Eagle Server Installation Guide
Linux Grub Information
Some PCs encounter problems seeing a boot menu after installing Eagle-Server. The following will
help you restore your grub boot menu.
1. Open a Terminal Shell session
2. At the prompt, type “ su – “ and press < Enter >. (There is a space between “su” and “-“)
When prompted for a password, type “ cisco ” and press < Enter >. Your prompt should
change to “[root@Eagle-Server ~]#”. You are now the root superuser.
3. Type “ grub ” (without parentheses) and press < Enter >. This will change the prompt to
“grub>”.
4. Type “ find /boot/grub/stage1 ” and press < Enter >. This will return the boot locations of
your grub files. If multiple lines are returned it is a good bet that the first one is your
original boot grub location. It will look something like: (hd0,1), where the “0” is the disk,
and the “1” is the partition.
Note: This “ find ” command can mislead you on the next step. The partition numbers given
here are relative, where the “ root ” command wants the absolute partition number. You will
need to subtract 1 from the partition numbers shown on this screen when you enter your disk
and partition information in on the root command.
5 of 21
671389913.001.png

Plik z chomika:

Inne pliki z tego folderu:

Inne foldery tego chomika:

Zgłoś jeśli naruszono regulamin