Notes regarding emulators. Emulator Format Comment -------- ------ ------- ICE-5100 AOMF51 code and symbolic information Intel standard code NEC-7809/7811 NEC-symb symbols Intel standard code Ashling Ashling-<proc> code and symbolic information Nohau AOMF51 code and symbolic information Intel standard code Symbolic code and symbols Ashling code and symbols AMC Extended-tekhex code and symbols ICE-196 AOMF96 code and symbolic information Intel standard code Pentica Pentica-<letter> symbols Intel standard code Motorola code Mice with USD Intel standard code Tektronix code Motorola code AOMF51 code and symbolic information Symbolic code and symbols Mice with MSD-3 Intel standard code Motorola code Tektronix code AOMF51 code and symbolic information Extended-tekhex code and symbols HP HP-code code HP-symb symbols ZAX ZAX symbols Signum AOMF51 code and symbolic information otherwise use Signum-supplied conversion utility Motorola Motorola code Huntsville Ashling-<proc> code and symbolic information Metalink Symbolic code and symbols Orion Symbolic code and symbols (choose [F7] Manx/Aztec in Orion's Unilab Software Ziltek Use Ziltek-supplied converter utility Sofia Iwasaki proice Mpds-code Please let us know if you are using another format or another emulator than those specified above. The HP 64000 system To run the program on the emulator do the following: 1. Link your program and if need be, make sure that there exists room for the monitor. 2. If the emulator needs an monitor, link with the HP linker, (on the host or the HP 64000) placing it at the correct address. 3. Make sure that the HP 64000 system is correctly configurated. 4. Download the files created by XLINK (the emulation files) to the HP 64000 system. 5. Load the program and the monitor into the Measurement System. Note: All symbols beginning with "?" are modified so they will begin with "_" instead.
umts