window.pdf

Easter Window

By Jenny Kearley

Materials Required:

Black Kaskad card 150mm x 90mm.

Pencil - soft lead.

Tracing paper.

Scalpel.

Green paper or cellophane 90mm x 50mm.

Blue paper or cellophane 100mm x 90mm.

A board to cut on.

P.V.A. Craft adhesive.

To Make Card:

Transfer the design onto the black card by

tracing outlines onto the tracing paper. Turn the

tracing paper over and retrace the lines, place the

tracing paper onto the black card and retrace

over the lines - this will leave the outline on the

black card. Alternatively you could make a copy

of the diagram and stick it to the black card at

Actual Size

the corners and cut through both the copy and

the black card at the same time. Cut the smaller

areas first, progressing to the larger areas as this

will help to hold the design firmly while you

cut. Glue the black card into the aperture of the

greeting card. With the card face down, glue the

blue behind the top half for sky and the green

over the bottom half for hills. Glue the card

closed in the normal way.

If you have used cellophane for the design