M1.pdf

(5116 KB) Pobierz
M1FRU.cdr
FIELD REPLACEABLE UNIT DOCUMENTATION
Tecra
M1 Series
GENERAL INFORMATION
Tools Required for Proper
Disassembly and Reassembly:
1. Phillips Screwdriver (Size 0&1)
2. Flat head Screwdriver
3. Case Separator
4. ESD Wrist Strap
5. ESD mats
6. Tweezers
Before attempting any of the following procedures,
make sure that the main battery and AC adaptor is
not connected to the unit and the environment in
which you are working on is protected from
Electro-Static Discharge(ESD).
TOSHIBA
Tough Enough for Today’s World.
TM
49472356.051.png 49472356.062.png 49472356.073.png 49472356.083.png 49472356.001.png 49472356.002.png 49472356.003.png 49472356.004.png 49472356.005.png 49472356.006.png 49472356.007.png 49472356.008.png 49472356.009.png 49472356.010.png 49472356.011.png 49472356.012.png 49472356.013.png 49472356.014.png 49472356.015.png 49472356.016.png 49472356.017.png 49472356.018.png 49472356.019.png 49472356.020.png 49472356.021.png 49472356.022.png 49472356.023.png 49472356.024.png 49472356.025.png 49472356.026.png 49472356.027.png 49472356.028.png 49472356.029.png 49472356.030.png 49472356.031.png 49472356.032.png 49472356.033.png 49472356.034.png 49472356.035.png 49472356.036.png 49472356.037.png 49472356.038.png 49472356.039.png 49472356.040.png 49472356.041.png 49472356.042.png 49472356.043.png 49472356.044.png 49472356.045.png 49472356.046.png 49472356.047.png 49472356.048.png 49472356.049.png 49472356.050.png 49472356.052.png 49472356.053.png 49472356.054.png 49472356.055.png 49472356.056.png 49472356.057.png 49472356.058.png 49472356.059.png 49472356.060.png 49472356.061.png 49472356.063.png 49472356.064.png 49472356.065.png 49472356.066.png 49472356.067.png 49472356.068.png 49472356.069.png 49472356.070.png 49472356.071.png 49472356.072.png 49472356.074.png
FIELD REPLACEABLE UNIT DOCUMENTATION
Tecra
M1 Series
TOSHIBA
Tough Enough for Today’s World.
TM
49472356.075.png 49472356.076.png
FIELD REPLACEABLE UNIT DOCUMENTATION
Tecra
TM
M1 Series
BATTERY PACK REMOVAL
OPTIONAL PC CARD REMOVAL
Battery
Pack
Release
lever
PC card
Eject button
1. Turn the computer upside down as shown.
2. Slide the battery release lever in the direction of the
arrow.
3. Lift out the battery .
1. Press the eject button for the PC card you want to
remove.
2. Press the extended eject button to pop the PC Card
out.
3. Grasp the PC card and remove it.
NOTE : Before removing any PC Card device, make sure
it is “STOPPED” in the PC Card manager.
SELECT BAY REMOVAL
CD-R/W/DVD-ROM DRIVE DISASSEMBLY
Release lever
CD-R/W/DVD-ROM
drive
Base cover
Connector
M2x3 silver
flat head
screws
Connector cover
Select bay
device
M2x8 silver
screws
1. Turn the computer upside down.
2. Slide the release lever in the direction of the arrow.
3. Pull out the select bay device in the direction of the
arrow.
1. Remove five M2x3 silver flat head screws securing
the base cover and lift out the cover .
2. Remove two M2x8 silver screws securing the
connector cover.
3. Remove the connector cover and the connector
from the CD-R/W/DVD-ROM drive.
NOTE: If the lock screw is in locked position, remove it
and attach it to the other hole for temporary retention
of the screw.
TOSHIBA
Tough Enough for Today’s World.
49472356.077.png 49472356.078.png
FIELD REPLACEABLE UNIT DOCUMENTATION
Tecra
TM
M1 Series
HDD REMOVAL
HDD cover
M2.5x4 black flat head screw
HDD pack
Plastic Tab
1. Turn the computer upside down.
2. Remove one M2.5x4 black flat head screw securing
HDD cover.
3. Remove the HDD cover .
4. Unfold the plastic tab and pull to remove the HDD
from the bay.
MODEM BOARD REMOVAL
HDD
bracket
HDD
HDD connector
M3x4 brass flat head screws
M2.5x4 black flat head screws
Modem/CPU cover
5. Remove four M3x4 brass flat head screws securing
the HDD to the bracket and lift the drive out of the
bracket .
6. Unplug the HDD connector from the drive.
1. Turn the computer upside down.
2. Remove one M2.5x4 black flat head screws
securing the modem cover.
3. Remove the modem cover .
TOSHIBA
Tough Enough for Today’s World.
49472356.079.png 49472356.080.png 49472356.081.png
 
FIELD REPLACEABLE UNIT DOCUMENTATION
Tecra
TM
M1 Series
MODEM BOARD REMOVAL
COOLING MODULE REMOVAL
M2.5x16
black flat
head screw
M2x4 brass screws
Modem board
CPU cover
M2.5x4 black flat head screws
1. Remove two M2x4 brass screws securing the
modem board.
2. Disconnect the modem board from PJ2017 on the
system board.
3. Disconnect the modem cable from JP1 on the
modem card.
1. Turn the computer upside down.
2. Remove three M2.5x4 black flat head screws and
one M2.5x16 black flat head screw securing the
CPU cover.
3. Lift out the CPU cover .
COOLING MODULE REMOVAL
CPU REMOVAL
Cooling
module
assy
CPU
Close
Open
M2.5x10 black flat head screws
Silicone grease
CPU lock
4. Remove four M2x6 brass screws securing the
cooling module.
5. Lift out the cooling module assembly .
6. Insert a flat head screwdriver to the CPU lock
and rotate it counter-clockwise to unlock the CPU .
7. Lift out the CPU .
TOSHIBA
Tough Enough for Today’s World.
49472356.082.png 49472356.084.png 49472356.085.png

Plik z chomika:

Inne pliki z tego folderu:

Inne foldery tego chomika:

Zgłoś jeśli naruszono regulamin