3000.pdf

(3675 KB) Pobierz
3000fWTABLEl
FIELD REPLACEABLE UNIT DOCUMENTATION
Satellite
3000 Series
GENERAL INFORMATION
Tools Required for Proper
Disassembly and Reassembly:
1. Phillips screwdriver (Size 0)
2. Phillips Screwdriver (Size 1)
3. Flat head screwdriver (5mm)
4. Hex driver (5mm)
5. Security Torx(Size8)
6. Case Separator
7. ESD Wrist Strap
8. ESD mats
9. Tweezers
Before attempting any of the following procedures,
make sure that the main battery and AC adaptor is
not connected to the unit and the environment in
which you are working on is protected from
Electro-Static Discharge(ESD).
TOSHIBA
TM
Tough Enough for Today’s World
49472377.061.png 49472377.072.png 49472377.083.png 49472377.094.png 49472377.001.png 49472377.012.png 49472377.013.png 49472377.014.png 49472377.015.png 49472377.016.png 49472377.017.png 49472377.018.png 49472377.019.png 49472377.020.png 49472377.021.png 49472377.022.png 49472377.023.png 49472377.024.png 49472377.025.png 49472377.026.png 49472377.027.png 49472377.028.png 49472377.029.png 49472377.030.png 49472377.031.png 49472377.032.png 49472377.033.png 49472377.034.png 49472377.035.png 49472377.036.png 49472377.037.png 49472377.038.png 49472377.039.png 49472377.040.png 49472377.041.png 49472377.042.png 49472377.043.png 49472377.044.png 49472377.045.png 49472377.046.png 49472377.047.png 49472377.048.png 49472377.049.png 49472377.050.png 49472377.051.png 49472377.052.png 49472377.053.png 49472377.054.png 49472377.055.png 49472377.056.png 49472377.057.png 49472377.058.png 49472377.059.png 49472377.060.png 49472377.062.png 49472377.063.png 49472377.064.png 49472377.065.png 49472377.066.png 49472377.067.png 49472377.068.png 49472377.069.png 49472377.070.png 49472377.071.png 49472377.073.png 49472377.074.png 49472377.075.png 49472377.076.png 49472377.077.png 49472377.078.png 49472377.079.png 49472377.080.png 49472377.081.png 49472377.082.png 49472377.084.png 49472377.085.png 49472377.086.png
FIELD REPLACEABLE UNIT DOCUMENTATION
Satellite
3000 Series
TOSHIBA
Tough Enough for Today’s World
TM
49472377.087.png 49472377.088.png 49472377.089.png 49472377.090.png
FIELD REPLACEABLE UNIT DOCUMENTATION
Satellite
TM
3000 Series
BATTERY PACK REMOVAL
OPTIONAL PC CARD REMOVAL
Battery
release lever
Battery pack
Eject button
PC card
1. Turn the computer upside down as shown.
2. Slide the battery release lever in the direction of the
arrow.
3. Slide the battery pack forward and lift it out.
1. Push the eject button to pop it out.
2. Press the eject button and remove the PC card .
NOTE : Before removing any PCMCIA device, make
sure it is “STOPPED” in the PC Card Manager.
MODULAR BAY REMOVAL
DVD-ROM/CDR-W DRIVE REMOVAL
DVD-ROM/CDR-W connector
DVD-ROM/CDR-W
Release
lever
DVD-ROM/CDR-W bracket
Select baydevice
M2.5x4 black screws
1. Turn the computer upside down.
2. Slide the release lever in the direction of the arrow.
3. Pull out the modular bay device in the direction of the
arrow.
1. Remove four M2.5x4 black screws securing the
DVD-ROM/CDR-W to the bracket.
2. Slide the DVD-ROM/CDR-W out of the bracket.
3. Disconnect the DVD-ROM/CDR-W connector from
the drive.
TOSHIBA
Tough Enough for Today’s World
49472377.091.png 49472377.092.png 49472377.093.png 49472377.095.png 49472377.096.png 49472377.097.png 49472377.098.png 49472377.099.png
FIELD REPLACEABLE UNIT DOCUMENTATION
Satellite
TM
3000 Series
HDD REMOVAL
HDD REMOVAL
M3x4 silver screws
HDD
bracket
Insulator
HDD connector
HDD assy
M2.5x3 black screws
1. Turn the computer upside down.
2. Remove two M2.5x3 black screws securing
HDD assembly .
3. Slide the HDD assembly in the direction of the arrow
to disconnect from the system board.
4. Lift the HDD assembly out of the HDD bay.
5. Remove two M3x4 silver screws securing the
HDD bracket to the drive and lift off the bracket.
6. Peel off the HDD insulator.
.
MEMORY MODULE REMOVAL
Memory clips
Memory
cover
M2x3 Black screws
Memory module
1. Turn the computer upside down.
2. Remove two M2x3 black screws and remove the
memory cover .
3. Spread the memory clips securing the memory
module and pull the memory module out of the
connector on a 45 degree angle.
TOSHIBA
Tough Enough for Today’s World
49472377.100.png 49472377.101.png 49472377.102.png 49472377.103.png 49472377.104.png 49472377.002.png 49472377.003.png
FIELD REPLACEABLE UNIT DOCUMENTATION
Satellite
TM
3000 Series
KEYBOARD REMOVAL
Wireless switch
Control board cable
Display
panel
JP1
Keyboard
holder
Board
switch
Case separator
M2.5x3 silver screws
Keyboard holder
3. Disconnect the control switch/LED board cable
from the keyboard holder.
4. Remove four M2.5x3 silver screws securing the
keyboard clip.
1. Open the display panel .
2. Using the case separator , unlatch the keyboard holder
at the top of the keyboard.
Note: When reinstalling the keyboard holder, make sure
that the wireless switch is latch properly to the control
switch board switch.
KEYBOARD REMOVAL
CONTROL BOARD REMOVAL
Keyboard
Control
switch
board
IPS switch
cable
Keyboard cable
JP5
JP4
M2.5x3 black screws
4. Lift out the keyboard and set it as shown above.
5 Disconnect the keyboard cable from JP5 and IPS switch
cable from JP4 on the video board and lift out the
keyboard.
1. Remove four M2.5x3 black screws securing the
control switch board.
2. Disconnect the control switch/LED board from JP4
on the main PCB.
TOSHIBA
Tough Enough for Today’s World
49472377.004.png 49472377.005.png 49472377.006.png 49472377.007.png 49472377.008.png 49472377.009.png 49472377.010.png 49472377.011.png

Plik z chomika:

Inne pliki z tego folderu:

Inne foldery tego chomika:

Zgłoś jeśli naruszono regulamin