freeRadius_AD_tutorial.pdf

(210 KB) Pobierz
FreeRADIUS
Tutorial for AD integration
Version 1.2
Charles Schwartz
Network Security Engineer
FreeRADIUS
Active Directory Integration
Charles Schwartz
Index
Introduction..................................................................................3
I Principles ................................................................................4
II Prerequisites...........................................................................5
III Set up the Linux server ........................................................6
IV Installation of FREERADIUS ...............................................10
IV.1 Configuration of clients.conf ...........................................11
IV.2 Configuration of radiusd.conf..........................................12
IV.3 Configuration of eap.conf................................................12
IV.4 Configuration of users.....................................................13
V Configuration of the switch ...................................................14
VI Configuration of the supplicant ..........................................16
VII Self-signed certificates.......................................................19
Page 2 of 20
8.06.2005
FreeRADIUS
Active Directory Integration
Charles Schwartz
Introduction
This document describes how to set up FREERADIUS server in order to
authenticate Windows XP network users transparently against Active
Directory.
It is a step by step 'quick&dirty' guide to configure FREERADIUS
server, network access points and WindowsXP supplicants.
I am not going to explain into detail each command or configuration
line provided in this tutorial.
If you are not familiar with some expressions, please use Google to
find out some more about them or just red the manuals that come with
the software/hardware.
Page 3 of 20
8.06.2005
FreeRADIUS
Active Directory Integration
Charles Schwartz
I
Principles
FREERADIUS offers authentication via port based access control. A user can
connect to the network only if its credentials have been validated by the
authentication server. User credentials are verified by using special authentication
protocols which belong to the 802.1X standard.
Refer to the graphic. Network access is only granted to the workstation
if the user credentials have been authenticated by the FREERADIUS
server. Otherwise the switch port will be down for any network traffic.
The RADIUS server is allowed to contact the domain controller for user
authentication.
Although the switch port is down, the workstation can communicate
with the RADIUS server via an authentication protocol.
The RADIUS server is able to check on the domain controller if the user
exists and if its password is correct. If this is the case, the RADIUS
server tells the switch to open the port and the user will get access to
the network.
Page 4 of 20
8.06.2005
1016029223.001.png
FreeRADIUS
Active Directory Integration
Charles Schwartz
II Prerequisites
The following components are required to install the access control
solution:
·
A Linux server
·
FREERADIUS 1.0.x
Samba 3.0.x
·
·
Openssl
·
Cisco Catalyst Switch
·
Windows XP clients (Win2k is not supported!)
The Linux distribution used is this context was Fedora Core 3.
Page 5 of 20
8.06.2005
Zgłoś jeśli naruszono regulamin