NEWS5.pdf

(2462 KB) Pobierz
26319500 UNPDF
VIKING HERITAGE
NEWSLETTER
I N T H I S I S S U E
Embla – a Viking ship has
been reconstructed ..1&3
Editorial ............................2
The defence of Birka –
this year’s excavation
of Garrison......................6
Slavs and Vikings at Gross
Strömkendorf ................9
Male dress in Finland
during the Viking age ..12
Hans put final touches to the keel. Photo: Gunilla Larsson.
This article is continued from Viking Heritage news 4 -1998.
A Viking museum in
Stockholm ....................12
Embla - a Viking ship
has been reconstructed!
Glimpses from the construction
The first logs for the construction were felled in May and June 1996. We received
help with the felling and transport of most of them from Jälla Agricultural school,
mostly from Leif Aronsson, but also from local people like Jan Forsman.
Felling with an axe Viking-style was a part of the LAN-course. After a theoretic
introduction, all the course participants got a chance at felling an oak, 1 metre in
diameter, using the kind of axe which was always used in this kind of work prior to
the advent of the bow saw and chain saw: the cutting-axe. It is heavier than the
hand-axe and has a short, almost straight edge. Our cutting-axe is a copy of the
Viking Age cutting-axe from Mästermyr on Gotland. The cutting-axe was furnished
with a long straight handle, as was the habit towards the end of the Viking Age,
shown for instance on the Bayeux tapestry. This axe was complemented by 19th
century cutting-axes, some of them borrowed from the Skeppsholmen Boatbuilding
School. The oak grew in Fjällnora and was a present from the Uppsala municipality.
After 4 hours of hard work the big oak fell and from this oak we obtained the
widest, finest planks for the planking.
To be continued on page 3 .
Rolled silver ....................14
Nordmannia ....................15
Two strange artefacts
from Fröjel Viking Age
harbour ........................17
Heritage news ................18
NUMBER 5 • 1998
26319500.007.png
VIKING HERITAGE Newsletter 5 • 1998
E D I TO R I A L
It is very inspiring to work in a
place that enjoys a flow of inter-
esting information. Viking
Heritage is such a place. After
considerable hard work with our
database and newsletter it seems
like we have attained one of our
main goals to be a resource and
an intermediary of knowledge
pertaining to Viking Age issues.
Visits at our Internet site and the
number of enquires are increas-
ing slowly but surely.
The culture of the Vikings and
the Viking Age fascinate people
all over the world. The best evi-
dence of that is perhaps not all
the intensive research conducted
in the universities, but the in-
numerable re-enactment societies,
ship re-constructions, Viking vil-
lages etc. that have been initiated
during later years. Our ambition
is to present all these projects, in
the newsletter and the database,
in order to provide as concise a
picture of the activities as possi-
ble. We hope that you will use us
as a resource from which to col-
lect facts and knowledge but also
as a forum for discussion. We
have said it before but it might
as well be said again: we are
dependent on your opinions,
points of view and knowledge
about what’s happening in the
Viking field, to be as good as
possible. If you have articles or
news items that concern
Vikings, please send them to us
and we will present them in the
database or the newsletter.
Viking Heritage has received
two distinctions recently. In
September, the Swedish maga-
zine Internetworld wrote:
“Viking Heritage is the foremost
forum for interchange of know-
ledge of the Viking Age…“. In
November we received a
Links2Go Key Resource Award
under the topic of Viking. These
distinctions encourage us to
continue our efforts and devel-
opment.
This year’s last issue is well-fil-
led with articles and news. One
article presents the results and
interpretations of the investiga-
tion at Gross Strömkendorf in
Germany. The settlement at
Gross Strömkendorf belongs to
an early phase of urbanisation
and it is a part of a general devel-
opment in Northern Europe
during the Early Middle Ages.
The author asks himself if the
settlement at Gross
Strömkendorf can be the ancient
Reric mentioned in contempor-
ary sources?
In spite of the geographical
nearness to the rest of the
Scandinavian countries Finland’s
Viking Age history has not been
observed to the same extent.
Finnish material shows similar-
ities with the material from rest
of Scandinavia and North
Europe during the Viking Age,
but there are also local types and
forms. Bearing in mind that we
haven’t published any article
from Finland before, it is especi-
ally gratifying to present an ar-
ticle about the male dress in
Finland during the Viking Age.
We also promise you interesting
reading about Birka´s defence,
boat-building, Australian re-
enactors and rolled silver.
We hope that you have been
pleased with the newsletters of
1998 and that we will meet your
expectations next year. We wish
you all a Merry Christmas, a
Happy New Year and welcome
to Viking Heritage Newsletter
in 1999.
Olle Hoffman
Editor
Viking Heritage Newsletter
olle@hgo.se
This newsletter is produced by
Snabba Tryck AB, Visby, Sweden
ISSN 1403-7319
2
26319500.008.png
VIKING HERITAGE Newsletter 5 • 1998
Embla - a Viking ship
has been reconstructed!
By B.A. Gunilla Larsson, The Department of Archaeology, Uppsala University.
Continued from front page.
The oak logs were radially split using
clubs and wedges. The Fjällnora oak
could be split into 16-32 parts. With
other logs we had to be satisfied with
only 4 or 8 parts. The planks were
roughly cut with a broad-axe before
being placed in water, where they were
stored while awaiting a suitable keel.
Since the first projected keel-oak was
cut too short and the other was too
twisted, the planking timber was
prepared so as to be nearly ready for
mounting whenever the keel and the
stems were in place.
It was a great day when the keel was
finally laid in August. First the stems
and then the planking were put in
place. During this phase our skills were
severely tested, when, on one hand,
wrongly twisted or straight planks had
to be twisted about 90 degrees without
breaking them and, on the other, the
rabbet at the stem had to be angled
correctly where the plank end was to be
attached. The Vikings had, of course,
much more material to choose from,
since a considerably milder climate
permitted the growth of oak forests in
mid-Sweden which were as fine as
those found in Southern Poland today.
They could always find logs with the
right twist in the grain, saving them the
strains in the wood that we had to
expose our planks to by forcibly twisting
them in the wrong direction. The
planks were certainly soft and pliable
after soaking, but they dried more
quickly than we could get them into
place. Heating over open fire made
them soft again, but they cooled too
quickly and became brittle, stiff and
fragile. However after a number of
attempts the garboard strakes, with the
greatest twist, were in place.
The most time-consuming part of
the boat-building was hewing the
planks finely to a thickness of only 10-
12 mm, with the broad-edged axe, also
called bearding-axe. Two of the replica
axes we used were modelled on orig-
Levelling of a plank. Photo: Gunilla Larsson
inals from Gamla Uppsala and one
from Valsgärde 6, one of the boat-graves
at the grave field in Valsgärde, only
some 800 metres from our construc-
tion site in Ensta. The hand-axe orig-
inating from Harbo was also popular
for many of the stages. Some preferred
the heavier Simtuna-axe, copied from
another Uppland model. These axes
held their own in competition with the
copy of a typical Danish Viking Age
hewing hatchet, with a single-sided
long edge, made after a model in
Hedeby. The planks were riveted to-
gether and to the keel with iron rivets
fastened with roves on the inside. The
planks were nailed to the stems. Where
the planking overlapped each other, in
the landing, the edge was planed to
give the hull the proper angle. A groove
was planed into the landing for the
luting; carded, twined, doubled and
tarred cattle hair. When the rivet holes
were drilled, the planks were held in
place with so-called plank-clips fitted
with wedges. The upper edge line was
marked by a ri, a wooden rib gauge
placed along the desired line and mark-
ed.
One raw day in November the posi-
tioning of the last plank occasioned
great celebration. The hull was now
fitted with planks. Finishing the hull
first and the interior afterwards is called
the shell-building method and was,
until the Middle Ages, the established
method of boat-building. The method
of ”skeleton building” with carvel-built
ships, where keels and frames were put
together first then covered with planks,
is a method which does not emerge in
Northern Europe until the late Middle
Ages.
The hull of fresh oak needed to be
protected against both rot and drying
out. Herring brine was used for this
purpose. The salt in the herring brine is
hygroscopic, i.e. it preserves the moist-
ure in the wood, herring oil has preserv-
ing qualities and retains the salt. Tar
was used as early as the Iron Age, but at
that time it was charcoal tar. In order
to obtain a tar with similar qualities a
tar pile was built in Finsta, under the
guidance of Ingvar Karlsson, from the
Finsta Agricultural School. As inexpe-
rienced tar-boilers we got only 5 litres.
The traditional way to finish wood in
3
26319500.009.png
VIKING HERITAGE Newsletter 5 • 1998
the Roslagen archipelago and Gotland
next to tarring has always been seal oil,
which was of great importance during
the Late Iron Age and the Middle Ages.
Seal oil has most certainly been the
foremost product from the several
hundreds of Iron Age sealing places
known to exist on the outer isles along
the east coast, just as it was important
as an export product from Stockholm
during the Middle Ages. According to
analyses made by the Royal Institute of
Technology, seal oil has the same char-
acteristics and contains the same poly-
unsaturated fat as linseed oil, implying
that it can be seen as the precursor of
linseed oil. Our only problem was that
of obtaining a seal, and also suffering
the unpleasant smells from the process
of slowly melting the seal lard over an
open fire, until it attained its fluid state
which it then retained. When it was
finally applied to the hull it gave the
oak wood a golden glistening, beautiful
surface, which was not prone to drying
out.
Gunwales, frames, cleats and knees
were made from waste building material.
These parts were nailed fast with trunnels
which were hammered in from the out-
side and wedged from the inside to
ensure they were water-tight and secure.
All this work was finished just in
time for Embla´s first launching
December 11, 1996. Some of us had
eager expectations, some were filled
with worry and doubt and others could
hardly wait to finally go to sea in our
maritime archaeological miracle, when
the Embla majestically slid down the
launchway and broke the water surface
for the first time on the Fyris River in
Ensta. One of the course participants
later rowed all other participants and
others up and down the river with one
pair of oars(!) between Ensta and
Valsgärde.
The LAN-course ended on
December 13, but even after that inter-
ested course participants with the pro-
ject leader Gunilla Larsson continued
to finish the Embla completely. She
should be provided with oars, tollpins,
mast, sails and keelson before the
official dedication and launching cere-
mony when the boat would be handed
over from the University to the local
Folk Heritage Society.
Rowing and sailing equipment had
not been preserved in the boat grave.
Traces of oars, tollpins, mast and mast
step were completely lost, meaning that
these details had to be designed by ana-
logy with contemporary finds where
they had been preserved. There were no
traces of the steering oar in the boat
grave. We chose therefore to make a
reconstruction of a steering oar from a
local find, found in 1934 during exca-
vations at the Main Square, Uppsala
(Sundquist 1948), which is of the same
type as preserved contemporary steer-
ing oars from, for instance, Årby in
Sweden and Fjörtoft and Oseberg in
Norway (Brögger & Shetelig 1950).
The original was made of pine, 1,38
metres long and with a blade 0,17
metres wide. We made the steering oar
of oak, from waste material, but with
the same dimensions.
There were no traces of any rigging
in the boat grave and there has been a
discussion of whether or not it carried
any sails at all. We chose to make a
mast and sails for the Embla because
picture stones show that even small
boats were rigged, as in the Danish
12th century finding from Gislinge of
a boat with almost exactly the same
dimensions as the Embla.
The sail was sewn by Olle Hjort
from the Museum of Naval History in
Stockholm. It was made from a length
of older Dutch linen sailcloth. We
chose a small rectangular sail of the
type that can be seen on picture stones
and coins from that time. Earlier
attempts have always dealt with high
sails of the Nordlans boat type, suited
for the North Sea. The only experiments
with low, wide sails have been on the
boats Krampmacken and Imme
Sleipner (Nylén 1987 s. 78). The
cordage consisted of hemp ropes, as in
preserved Viking Age finds,.
On one of the most beautiful early
summer days it was finally time for the
momentous ceremony, the delivery,
official launching and christening of
the Embla. At a ceremony at the con-
struction site, professor Bo Gräslund,
at the Institution of Archaeology,
Uppsala University and the chairman
of the Gamla Uppsala Folk Heritage
society, Ragnar Nilsson, addressed a
gathering of about 150 guests. After
that it was time for the boat to be
committed to its proper element and
named by the society’s secretary
Christina Aronsson, together with Eva
Vårdsäter and Gunilla Larsson.
Afterwards a christening feast was held
on the grass and those gathered were
given the opportunity of taking an
inaugural voyage with the Embla along
the Fyris river.
Some results...
A boat built with the Viking Age
radially splitting technique results in:
• A boat 7, 2 metres long with a
weight of only 250 kilos. This makes
the boat easy to row, fast and easily
Embla on the Fyris river after the ceremonies June 8 1997. Photo: Gerth Larsson
4
26319500.010.png
VIKING HERITAGE Newsletter 5 • 1998
portaged past rapids, on the Russian
rivers as well as between the lake sys-
tems in Sweden.
• A boat whose planking, in spite of its
thickness of only 10-12 mm, may be
bent and loaded without breaking.
This makes the hull soft and elastic
in the water and durable when
beached, as during the Vikings
frequent coast raids.
• A boat which loaded with 4 persons
still only has a draught of only 0,35
metres. A boat built in this manner
could sail up on any shallow shore or
bank and also up shallow rivers.
• A boat which does not show any sun
shakes in the planking after one sum-
mer on land, owing to the fact that
the wood shrinkage is only half as
much radial as tangential.
• The slender, long and narrow shape
and the light design makes it possible
for one man to row the Embla with a
full crew up the Fyris river.
the end of the Iron Age. The section of
the route which passes through the
archipelago of Stockholm and Roslagen
seems to be made for a boat like the
Embla.
The Embla on the trail of the
Vikings:
Since its consecration the Embla has
been touring on Lake Ekoln, to one
square sailing meeting and has also
been filmed by TV at the Foteviken
Maritime Centre in Skåne where she
sailed initially. Perhaps it will be poss-
ible to test the Embla´s qualities along
a section of the Viking’s Eastern route,
where many influences on cultural life
in the Old Uppsala region originated at
References:
Lindberg, A., 1990. Blanka.
Dokumentationen av kopia av båt X.
Stockholms Medeltidsmuseum.
Nylén, E., 1987. De vikingatida seg-
len. Skepp och smide. Artiklar till-
ägnade Per Lundström. Statens
Sjöhistoriska Museum. Stockholm.
Sundqvist, N., 1954. En styråra från
Östra Aros. TOR.
Westman, F., 1982. Tjärbränning.
B e ställ
Populär Arkeologis
v i k i n ga n u m m e r !
Ls om de senaste forskarrnen om vikingatiden.
Vikinganumret kostar 55 kronor plus porto. Rabatt vid
flerexbestllning.
tel 0498 – 22 80 00 fax 0498 – 22 80 21
e - p o st: popark @ m a i l . c o m
5
26319500.001.png 26319500.002.png 26319500.003.png 26319500.004.png 26319500.005.png 26319500.006.png
Zgłoś jeśli naruszono regulamin