E2370_How_to_download.pdf

GT-E2370

How to Download SW into the handset :

1) Download new binary from MEET server (you can find under software listings)

2) Go to tools listings on the MEET server and download the “PNX49xx Downloader v0.3 Lite For

GT-E2370 (Megacell).exe ” on your PC!!

3) Connect the handset (phone) in power on state via S20Pin USB cable to the PC and it will

automatically be update the drivers!!

Now you are ready for Download -> disconnect the phone and take out/in the battery!! (Phone hast to

be switch off)

4) Take the S20 Pin (Swift) Serial cable (SGH-T409 DM+USB) and connect it together with an serial to

USB adapter to the PC’s USB port!!

5) Open the Downlaoder for Megacell and check the settings (you can refer to belows screenshot)

You can check the Serial Port in the device manager on your PC, after you connect the cable to the PC

(in my case COM 10) and change your speed to 460800!Click on “With common CSC” and on

“BIN+TFS” and load the phone binary to the Downloader!!

6) After you did this, you can click on “START” button, and immediately connect the phone to the Swift

cable.

While the buttons gets de-activated, you have to power on the phone manually!!

If you can see the message, that the phone is ready to DOWNLOAD, you can click on the DOWNLOAD

button and the PGM starts to update the phone!

Wait until the downloader is finish and disconnect the phone!!

Take out and in the battery and start the handset!

FULLY reset: *2767*FULL#

SW and HW check: *#4986*2650468#

Finish!!!!