Skoolhouse.pdf

Please note that this project is not recommended for children. It requires a moderate degree of skill, and the use of a cutting blade, which is extremely dangerous. When using cutting blades always use protective eyewear. Color printing is recommended. This model

was designed to be printed on Matte Paper Heavyweight, and the use of white glue is recommended. There are many folds in the model, and it is recommended that you score the fold first, using a dull cutting blade, or other fine, blunt tipped instrument.

Black dashed lines represent a mountain fold (a fold which point upward), and orange dashed lines represent a valley fold (the fold points downward). The orange dashed lines are accompanied by a red “+” at each end. These are to be used as pin guides, so you can

poke small holes at the “+ , flip the sheet over, and score between the holes for a clean valley fold. Read the instructions and study the illustrations carefully before beginning.

STEP 3 - Attach roof to walls using tabs and slots.

When roof is in position, fold down and glue tabs.

Also attach door piece 4G using slots and tabs. Be

sure bottom of door is aligned with the bottom of

the Skoolhouse wall, fold down and glue tabs.

STEP 2 - Fold down tabs of roof piece

3A. Put small amount of glue along

the top edge of all of the tabs. Place

roof piece 3B on top of 3A, being sure

top edges are aligned.

After roof and door are

attached, close bottom flap