Longwire Antenna with Magnetic Balun.pdf

Longwire Antenna with Magnetic Balun

http://www.qsl.net/dc2wk/long.html

Longwire Antenna with Magnetic Balun

All stuff what we need to build the balun and the antenna. The Antenna wire is not in the Picture.It´s an isolated copper wire

with 2mm.

At first i make the balun. I take an magnetic balun Cirurit from DK9NL. Thanks to him, that he public this Cirurit.

Here is the Cirurit of the Magnetic Balun.

1 z 6

22-07-09 11:33

Longwire Antenna with Magnetic Balun

http://www.qsl.net/dc2wk/long.html

The toroidal core is an Amidon T130-2 with 8 times an triplet wire(take tree colors). Take time for this work. It hurts an litle bit,

but make it hart and exactly. I take an isolated 0,7mm wire for this. I think you can give him about 500 Watts PEP (without

garanty).

After that i cut holes in the waterproof plastic case. One big for the PL jack, and 2 little for the antenna and ground.

Here are all jacks build in.

2 z 6

22-07-09 11:33

Longwire Antenna with Magnetic Balun

http://www.qsl.net/dc2wk/long.html

Near finished. The toroidal core is build in the case.

Now we can close the case.

With the Dipmeter we can check the frequency the balun works. He works from 1.8MHz up to 35MHz. Thats enough for us. At

28 the SWR goes an little bit up.

3 z 6

22-07-09 11:33

Longwire Antenna with Magnetic Balun

http://www.qsl.net/dc2wk/long.html

I build an second one for outside, what i will leave at the housetop. The first one is my portable one. All parts are silver or

rust-resistant parts.

Now we can continue with the antenna. At first i make the isolator. This is an part of an Wood shaft.

This is the finished wire from 15m(Antenna side). The other one for the ground is 10m long.

4 z 6

22-07-09 11:33

Longwire Antenna with Magnetic Balun

http://www.qsl.net/dc2wk/long.html

The finished antenna. I caulking all holes with hot-melt adhesive. Now i must see , the antenna works or not. An magnetic balun

is not for 1:1 SWR !!! You also need an Antenna Tuner ! But the very high impedance of an end feet antenna goes so far down

that you can match an 6m wire so , it works with low SWR on 80m.

SWR without an antenna tuner ! Testet with an FT-7B

Band SWR blank SWR with Lowpass SWR with Lowpass and tuner

80m 1:1,5

1:1,0

no tuner need

40m 1:2,0

>1:3,0

1:1,2

20m 1:2,0

1:1,0

no tuner need

15m 1:1,5

1:2,5

1:1,0

10m 1:1,0

1:1,0

no tuner need

The Lowpass filter is in my 'Self Build Ham Stuff' side

The costs of all:

toroidal core 1.68 EUR

Plastic case waterproof 1.03 EUR

Copper Wire Antenna 25m 10 EUR

Copper Wire balun 3 colors 6m 1 EUR

Wood shaft 1m long 3.50 EUR

Jacks are from trash box. 0,00 EUR

========================================== ============

Complete Antenna with magnetic balun

17,21 EUR

Update after an Test from 1 week:

The Mag balun i make with thinner wire (Bell wire).

5 z 6

22-07-09 11:33

Plik z chomika:

Inne pliki z tego folderu:

Inne foldery tego chomika: