Service-Manual-Samsung-Galaxy-s2.pdf

(13624 KB) Pobierz
Samsung GT-i9100 service manual
GSM TELEPHONE
GT-i9100
GSM TELEPHONE
CONTENTS
1. Safety Precautions
2. Specification
3. Product Function
4. Exploded View and Parts list
5. MAIN Electrical Parts List
6. Level 1 Repair
7. Level 2 Repair
8. Level 3 Repair
9. Reference data
Notice :
All functionality, features, specifications and other
product information provided in this document inclu
ding, but not limited to, the benefits, design, pricing,
components, performance, availability, and capabiliti
- es of the product are subject to change without
notice or obligation. Samsung reserves the right to
make changes to this document and the product
described herein, at anytime, without obligation on
Samsung to provide notification of such change.
736456476.007.png 736456476.008.png 736456476.009.png
This Service Manual is a property of Samsung Electronics Co.,Ltd.
Any unauthorized use of Manual can be punished under applicable
International and/or domestic law.
Samsung Electronics Co.,Ltd.
2011. 04. Rev.1.0
736456476.010.png
1. Safety Precautions
1-1. Repair Precaution
Repair in shield box during detailed tuning.
Take specially care of tuning or test because the specification of mobile phone is sensitive for
surrounding interference(RF noise).
Be careful to use a kind of magnetic object or tool because performance of parts is damaged by
the influence of the magnetic force.
Surely use a standard screwdriver when you disassemble this product.
Use a thicken twisted wire when you measure level because a thicken twisted wire has low
resistance.
Repair after separate test pack and set because of short danger (for example an overcurrent and
furious flames of parts etc) when you repair the board in condition of connecting Test Pack and
tuning on.
Take specially care of soldering iron because the board of the PCB is small and weak in heat.
Surely tune on/off while using AC power plug because a repair of battery charger is dangerous
when tuning ON/OFF PBA and Connector after disassembling the charger.
Don't use the unauthorised materials except for the replacement registered on SEC System.
Otherwise the engineer isn't charged with issues that you don't keep.
1-1
SAMSUNG Proprietary-Contents may change without notice
This Document can not be used without Samsung's authorization
736456476.001.png
 
Safety Precautions
1-2. ESD(Electrostatically Sensitive Devices) Precaution
Several semiconductors may be damaged easily by static electricity. Such parts are called by ESD
(Electrostatically Sensitive Devices), for example IC,BGA chip etc. Read Precaution below.
Protect you from ESD damage by static electricity.
Remove electrical charges emitted by the human body before you touch semiconductors or parts.
There are ways that you touch an earthed place or wear static electricity prevention string on wrist
to prevent these problems.
Use a earthed soldering steel when you connect or disconnect ESD.
Use a soldering removing tool equipped with static electricity isolation.Otherwise ESD will be
damaged by static electricity.
Don't unpack product until you set up ESD in the product. Because most of the ESD is packed by
box and aluminum plate to have conductive power, it is prevented from static electricity.
You must maintain electric contact between ESD and a part to be set up until ESD is connected
completely to the proper place or a circuit board.
1-2
SAMSUNG Proprietary-Contents may change without notice
This Document can not be used without Samsung's authorization
736456476.002.png
 
2. Specification
2-1. GSM General Specification
GSM850 EGSM 900 DCS1800 PCS1900
WCDMA
2100
WCDMA
1900
WCDMA
900
WCMDA
850
Freq.
Band[MHz]
Uplink/
Downlink
824~849
869~894
880~915
925~960
1710~1785
1805~1880
1850~1910
1930~1990
1922~1977
2112~2167
1852~1907
1932~1987
880~915
925~960
824~849
869~894
ARFCN
range
128~251
0~124 &
975~1023
512~885 512~810
UL:
9612~9888
DL:
10562~1083
8
UL:
9262~9538
DL:
9662~9938
UL:
2712~2863
DL:
2937~3088
UL:
4132~4233
DL:
4357~4458
Tx/Rx
spacing
45MHz
45MHz
95MHz
80MHz 190MHz 80MHz
45MHz
45MHz
Mod. Bit
rate/
Bit Period
270.833kbp
s
3.692us
270.833kbp
s
3.692us
270.833kbp
s
3.692us
270.833kbp
s
3.692us
3.84Mcps 3.84Mcps 3.84Mcps 3.84Mcps
Time Slot
Period/
Frame
Period
576.9us
4.615ms
576.9us
4.615ms
576.9us
4.615ms
576.9us
4.615ms
FrameLengt
h:
10ms
Slotlength:
0.667ms
FrameLengt
h:
10ms
Slotlength:
0.667ms
FrameLengt
h:
10ms
Slotlength:
0.667ms
FrameLengt
h:
10ms
Slotlength:
0.667ms
Modulation 0.3GMSK 0.3GMSK 0.3GMSK 0.3GMSK
QPSKHQPS
K
QPSKHQPS
K
QPSKHQPS
K
QPSKHQPS
K
MS Power
33dBm~5dB
m
33dBm~5dB
m
30dBm~0dB
m
30dBm~0dB
m
24dBm~
-50dBm
24dBm~
-50dBm
24dBm~
-50dBm
24dBm~
-50dBm
Power
Class
5pcl ~
19pcl
5pcl ~19pcl 0pcl ~15pcl 0pcl ~15pcl
3(max+24dB
m)
3(max+24dB
m)
3(max+24dB
m)
3(max+24dB
m)
Sensitivity -102dBm -102dBm -100dBm -100dBm -106.7dBm -106.7dBm -106.7dBm -106.7dBm
TDMA Mux
8
8
8
8
8
8
8
8
Cell Radius 35Km 35Km 2Km
2Km
2Km
2Km
2Km
2Km
2-1
736456476.003.png 736456476.004.png 736456476.005.png 736456476.006.png
Zgłoś jeśli naruszono regulamin