Restraints Control Module (RCM).pdf

Strona 1 z 1

Supplemental Restraint System - Restraints Control Module (RCM)

Mondeo 2007.5 (02/2007-)

Removal and Installation

General Equipment

Ford diagnostic equipment

Removal

WARNINGS:

The supplemental restraint system (SRS) is active for a certain length of time after the power supply has been disconnected. Wait for a minimum of 3

minutes before disconnecting or removing any SRS components.

Make sure that the vehicle electrical system is fully depowered and no other power source is connected.

Wear safety goggles.

Refer to: Supplemental Restraint System (SRS) Health and Safety Precautions (100-00 General Information, Description and Operation).

1. Disconnect the battery ground cable.

Refer to: Battery Disconnect and Connect (414-01 Battery, Mounting and Cables, General Procedures).

2. Remove the floor console.

Refer to: Floor Console (501-12 Instrument Panel and Console, Removal and Installation).

3. If equipped.

Installation

1. Torque: 8 Nm

2. To install, reverse the removal procedure.

3. When a new RCM is installed, configure the RCM using the diagnostic tool.

General Equipment: Ford diagnostic equipment

http://127.0.0.1:8888/wsm/js/procedure.do?variantId=1449&proc-uid=G552197&gui...

2012-08-11