HBY_e.pdf

Important Notes, Contents

Product Overview

SIMATIC

Configuration Options

Y-Connection

Installation

Wiring

Manual

Commissioning and Diagnostics

Maintenance

Y-Connection in DP Standard

Master Mode

Technical Specifications

Order Numbers

Glossary, Index

02/2000

A5E00064772 01

Edition 1

Safety Guidelines

This manual contains notices which you should observe to ensure your own personal safety, as well as

to protect the product and connected equipment. These notices are highlighted in the manual by a

warning triangle and are marked as follows according to the level of danger:

Danger

indicates that death, severe personal injury or substantial property damage will result if proper precau-

tions are not taken.

Warning

indicates that death, severe personal injury or substantial property damage can result if proper precau-

tions are not taken.

Caution

indicates that minor personal injury or property damage can result if proper precautions are not taken.

Note

draws your attention to particularly important information on the product, handling the product, or to a

particular part of the documentation.

Qualified Personnel

Only qualified personnel should be allowed to install and work on this equipment. Qualified persons

are defined as persons who are authorized to commission, to ground, and to tag circuits, equipment, and

systems in accordance with established safety practices and standards.

Correct Usage

Note the following:

Warning

This device and its components may only be used for the applications described in the catalog or the

technical descriptions, and only in connection with devices or components from other manufacturers

which have been approved or recommended by Siemens.

This product can only function correctly and safely if it is transported, stored, set up, and installed cor-

rectly, and operated and maintained as recommended.

Trademarks

SIMATIC, SIMATIC HMI and SIMATIC NET are registered trademarks of SIEMENS AG.

Some of other designations used in these documents are also registered trademarks; the owner’s rights

may be violated if they are used by third parties for their own purposes.

The reproduction, transmission or use of this document or its contents is not

permitted without express written authority. Offenders will be liable for

damages. All rights, including rights created by patent grant or registration of

a utility model or design, are reserved.

Disclaimer of Liability

We have checked the contents of this manual for agreement with the hard-

ware and software described. Since deviations cannot be precluded entirely,

we cannot guarantee full agreement. However, the data in this manual are

reviewed regularly and any necessary corrections included in subsequent

editions. Suggestions for improvement are welcomed.

Siemens AG

Bereich Automatisierungs- und Antriebstechnik (A&D)

Geschäftsgebiet Industrie-Automatisierungsysteme (AS)

Postfach 4848, D- 90327 Nürnberg

Siemens AG 2000

Technical data subject to change.

Y-Connection

A5E00064772 01

Index-2

Siemens Aktiengesellschaft

Important Notes

Purpose of the Manual

The information contained in this manual will enable you to use the Y-connection.

Target Group

The manual describes the hardware of the Y-connection. It consists of instructive

chapters and reference chapters (technical specifications).

The following subjects are covered:

Configuration options

Installing and wiring the Y-connection

Commissioning and diagnostics of the Y-connection

Technical specifications

Order numbers

Y-Connection

A5E00064772 01

iii

Important Notes

Scope of Validity

This manual describes the Y-connection and is valid for the following products:

Y-connection with 200 mm rail, 2 different bus modules, 2 Y-IMs and

1 Y-coupler (installed and tested ready for operation): 6ES7 654-1YB00-0AB0

Y-connection with 300 mm rail, 2 PS307; 2 A power supply modules, 2 different

bus modules, 2 Y-IMs and 1 Y-coupler (installed and tested ready for operation):

6ES7 654-2YB00-0AB0

Individual components:

–

Y-IM: 6ES7 654-0YS00-0AB0

–

Y-coupler: 6ES7 654-0YK00-0AB0

–

BM IM 157/IM 157 bus module: 6ES7 195-7HE80-0XA0

–

BM Y-coupler bus module: 6ES7 654-7HY00-0XA0

–

PS307; 2 A power supply module: 6ES7 307-1BA00-0AA0

It describes the components valid at the time of the manual’s publication. We

reserve the right to enclose a product information document containing current

information with new components and new releases of components.

Position in the Information Landscape

In addition to this manual, you require the manual for the DP master used.

CD-ROM

The entire Y-connection documentation is also available on CD-ROM.

Standards, Certificates and Approvals

The Y-connection complies with EN 50170, Volume 2, PROFIBUS. The

Y-connection meets the requirements and criteria of IEC 131, Part 2 and the

requirements for CE marking. CSA, UL and FM certificates and approvals for the

Y-connection have been granted. Please refer to Chapter 8 for further details on

standards, certificates and approvals.

Y-Connection

A5E00064772 01

Important Notes

Recycling and Disposal

The Y-connection hardware is low in contaminants and can thus be recycled.

For further information about environment-friendly recycling and the procedure for

disposing of your old equipment, please contact:

Siemens Aktiengesellschaft

Anlagenbau und Technische Dienstleistungen

ATD ERC Essen Recycling/ Remarketing

Frohnhauser Str. 69

45127 Essen

Phone: +49 201/816 1540 (hotline)

Fax: +49 201/816 1504

Aids to Finding Information

To help you find the information you require quickly, the manual offers the following

aids:

At the beginning of the manual you will find a comprehensive table of contents

as well as lists of all the figures and tables that appear in the manual.

Each chapter contains subheadings that provide you with an overview of the

contents of the relevant sections.

Following the appendices, you will find a glossary in which important technical

terms used in the manual are defined.

Finally, a comprehensive index allows quick access to information on specific

subjects.

Additional Support

If you have queries of a technical nature, please get in touch with your contact at

Siemens in the office or branch that you deal with. You will find the address in the

manuals for the DP masters, in the appendix entitled “Siemens Worldwide” in the

S7-300 Programmable Controller, Hardware and Installation manual, in catalogs

and on CompuServe ( GO AUTFORUM ).

If you have any questions or suggestions concerning this manual, please fill out the

form at the back and return it to the specified address.

If you require the device database file, you can download this from the

S chnitt S tellen C enter Fürth via modem by dialing +49 (911) 737972 or on the

Internet at http://www.ad.siemens.de/csi_e/gsd.

Y-Connection

A5E00064772 01

Plik z chomika:

Inne pliki z tego folderu:

Inne foldery tego chomika: