d7sys_glossar_e.pdf

Forword

Glossary

SIMADYN D

Glossary

Manual

Safety guidelines

This Manual contains notices which you should observe to ensure your own personal

safety, as well as to protect the product and connected equipment. These notices are

highlighted in the Manual by a warning triangle and are marked as follows according to

the level of danger:

DANGER

indicates an imminently hazardous situation which, if not avoided, will result in death or

serious injury.

WARNING

indicates a potentially hazardous situation which, if not avoided, could result in death or

serious injury.

CAUTION

used with the safety alert symbol indicates a potentially hazardous situation which, if not

avoided, may result in minor or moderate injury.

CAUTION

used without safety alert symbol indicates a potentially hazardous situation which, if not

avoided, may result in property damage.

NOTICE

used without the safety alert symbol indicates a potential situation which, if not avoided,

may result in an undesireable result or state.

Correct usage

Note the following:

This device and its components may only be used for the applications described in the

catalog or the technical description, and only in connection with devices or components

from other manufacturers which have been approved or recommended by Siemens.

Trademarks

SIMATIC  and SIMADYN D  are registered trademarks of Siemens AG.

Third parties using for their own purposes any other names in this document which refer

to trademarks might infringe upon the rights of the trademark owners.

Disclaimer of liability

The reproduction, transmission or use of this document or its

contents is not permitted without express written authority.

Offenders will be liable for damages. All rights, including rights

created by patent grant or registration of a utility model or

design, are reserved.

Siemens AG

A&D AS CC DC

Frauenauracher Stra¦e 80

91056 Erlangen

We have checked the contents of this manual for agreement

with the hardware and software described. Since deviations

cannot be precluded entirely, we cannot guarantee full

agreement. However, the data in this manual are reviewed

regularly and any necessary corrections included in subsequent

editions. Suggestions for improvement are welcomed.

Siemens AG 2001

Technical data subject to change.

Siemens Aktiengesellschaft

Foreword

Purpose of this

Manual

This Manual explains the principle use and functions of the STEP 7

automation software with the main focus on closed-loop control systems.

Target group

This Manual addresses programmers and commissioning engineers. It is

assumed that this group has general know-how about closed-loop control

technology.

Validity of the

Manual

This Manual is valid for D7-SYS Version 5.2.

Additional support

Please contact your local Siemens office for answers to any questions

regarding the use of the software described, which you can neither find in

the paper documentation nor in the online help. You can also call the

Hotline:

Tel.:

+49(9131) 98-5000

Fax:

+49(9131) 98-1603

e-mail:

simadyn.hotline@erlf.siemens.de

If you have any questions or comments on this Manual, please complete

the questionnaire at the end of the Manual and return it to us at the

address given. Also let us know your overall opinion of the Manual.

Appropriate training courses are available in order to make it easier to get

to know the SIMADYN D automation system. Please contact the central

Training Center in D-Erlangen:

Tel.:

+49(9131) 7-27689, -27972

Fax:

+49(9131) 7-28172

Internet:

www.siemens.de/sibrain

Intranet:

http://info-tc.erlm.siemens.de/

NOTE

This user part of the Manual does not include any detailed

information/instructions with individual descriptions, but is only intended

to provide a basic procedure. More detailed information on the dialog

boxes in the software and how they are handled is provided in the

appropriate online help.

iii

Glossary - SIMADYN D

Edition 12.2001

Foreword

Information

overview

Title

Content

System and

communications

configuring D7-SYS

The first project in a few steps

This Section provides an extremely simple entry into the methodology when

assembling and programming the SIMADYN D control system. It is

especially conceived for first-time users of a control system.

System software

This Section provides basic know-how about the structure of the operating

system and an application program of a CPU. It should be used to obtain an

overview of the programming methodology, and basis for configuring user

programs.

Communications configuring

This section provides you with basic know-how about the communication

possibilities and how you configure links to the communication partners.

Changeover from STRUC V4.x to D7-SYS

Essential features are included in this section, which have changed over

STRUC V4.x with the introduction of D7-SYS.

STEP 7 option packages

for D7-SYS

Basis software

This section explains the essential use and the functions of the STEP 7

automation software. For first users, it provides an overview on configuring,

programming and commissioning a station.

When working with the basis software, you can access the online help which

provides you with support when it comes to detailed questions on using the

software.

CFC

The CFC language (Continuous Function Chart) allows you to graphically

interconnect blocks.

When working with the particular software, you can also use the online help

which can answer detailed questions regarding the use of the

editors/compiler.

SFC

Configuring sequence controls using SFC (Sequential Function Chart) of

SIMATIC S7.

In the SFC editor, you generate a sequence chart using graphic resources.

The SFC elements of the chart are then positioned according to specific

rules.

Hardware

The complete hardware spectrum is described as reference in this Manual.

Function blocks

This Reference Manual provides you with an overview of selected function

blocks such as closed-loop control, communication blocks etc.

Glossary - SIMADYN D

Edition 12.2001

Foreword

As first time user, we recommend that this Manual is used as follows:

Guide

Please read the first section on using the software in order to get to

know some of the terminology and basic procedure.

Then use the particular sections of the Manual if you wish to carry-out

certain processing steps (e.g. loading programs).

If you have already executed a small project, and have gained some

experience, then you can read individual sections of the Manual in order

to get up to speed about a specific subject.

Glossary - SIMADYN D

Edition 12.2001

Plik z chomika:

Inne pliki z tego folderu:

Inne foldery tego chomika: