SINAUT Micro SC.pdf

(935 KB) Pobierz
Microsoft Word - MN_SINAUT-MicroSC_76.doc
SIMATIC NET
Preface, Contents
1
SINAUT MICRO SC
System manual
2
3
5
6
SINAUT MICRO SC
7
8
9
10
Glossary
C79000-G8900-C210
Release 02/2006
14759521.001.png
Safety Guidelines
This manual contains notices you have to observe in order to ensure your personal safety, as well as to prevent
damage to property. The notices referring to your personal safety are highlighted in the manual by a safety alert
symbol, notices referring only to property damage have no safety alert symbol. These notices shown below are
graded according to the degree of danger.
! Danger
indicates that death or severe personal injury will result if proper precautions are not taken
! Warning
indicates that death or severe personal injury may result if proper precautions are not taken.
! Caution
with a safety alert symbol, indicates that minor personal injury can result if proper precautions are not taken..
Caution
without a safety alert symbol, indicates that property damage can result if proper precautions are not taken.
Notice
indicates that an unintended result or situation can occur if the corresponding information is not taken into
account.
If more than one degree of danger is present, the warning notice representing the highest degree of danger will
be used. A notice warning of injury to persons with a safety alert symbol may also include a warning relating to
property damage.
Qualified Personnel
The device/system may only be set up and used in conjunction with this documentation. Commissioning and
operation of a device/system may only be performed by qualified personnel. Within the context of the safety notes
in this documentation qualified persons are defined as persons who are authorized to commission, ground and
label devices, systems and circuits in accordance with established safety practices and standards.
Prescribed Usage
Note the following:
! Warning
This device may only be used for the applications described in the catalog or the technical description and only in
connection with devices or components from other manufacturers which have been approved or recommended
by Siemens. Correct, reliable operation of the product requires proper transport, storage, positioning and
assembly as well as careful operation and maintenance
Trademarks
All names identified by ® are registered trademarks of the Siemens AG. The remaining trademarks in this
publication may be trademarks whose use by third parties for their own purposes could violate the rights of the
owner.
Disclaimer of Liability
We have reviewed the contents of this publication to ensure consistency with the hardware and software
described. Since variance cannot be precluded entirely, we cannot guarantee full consistency. However, the
information in this publication is reviewed regularly and any necessary corrections are included in subsequent
editions.
Siemens AG
Automation and Drives
Postfach 48 48
90437 NÜRNBERG
GERMANY
Order No.: C79000-G8976-C178-04
Edition 02/2006
Copyright © Siemens AG 2006
Technical data subject to change
14759521.002.png
General notices about the system
Before using the software SINAUT MICRO SC and the PLC library please read
carefully this system manual. Observe also the system manual of the GPRS/GSM
modem SINAUT MD720-3.
SINAUT MD720-3
C79000-G8900-C210
3
Preface
Purpose of this documentation
This documentation will support you on your way to successful application of the
SINAUT MICRO SC. It will introduce you to the topic in clear and straightforward
steps and provide you with an overview of the hardware and software components
of the SINAUT MICRO SC and SINAUT MD720-3 station control system. You will
be supported during the planning of network structures and topologies and will see
how to install and configure individual components based on the installation
guidelines. This documentation will help you during installation and commissioning
of SINAUT modules and explains the diagnostics and service options available.
Validity of the documentation
This manual relates to the following product versions
• SINAUT MICRO SC Server (Version 1.1 and higher)
• GPRS-Modem MD720-3 (Version 1.1 and higher)
SIMATIC Technical Support
You can contact Technical Support for all A&D products
• Phone: +49 (0) 180 5050 222
• Fax: +49 (0) 180 5050 223
You will find further information on our Technical Support on the Web at
http://www.siemens.com/automation/service
Service & Support on the Internet
In addition to our documentation services, you can also make use of all our
knowledge on the Internet
http://www.siemens.com/automation/service&support
Here, you will find:
• Up-to-date product information (Updates), FAQs (Frequently Asked Questions),
Downloads, Tips and Tricks.
• The Newsletter keeps you constantly up to date with the latest information on
the products you use.
• The Knowledge Manager will find the documents you need.
• In the Forum, users and specialists exchange information and experience.
• You can find your local contact for Automation & Drives in our contacts
database.
SINAUT MD720-3
4
C79000-G8900-C210
Preface
• You will find information on local service, repairs, spares and much more under
the rubric "Service".
You will find the latest version of this documentation under the entry ID 22547968.
Do you still have questions relating to the use of the products described in the
manual? If so, then please talk to your local Siemens contact.
You will find the addresses in the following sources:
• On the Internet at: http://www.siemens.com/automation/partner
• On the Internet at http://www.siemens.com/simatic-net specifically for SIMATIC
NET products
• In the catalog CA 01
• In the catalog IK PI specifically for SIMATIC NET products
SIMATIC training center
To familiarize you with the systems and products, we offer a range of courses.
Please contact your regional training center or the central training center in
D-90327 Nuernberg.
Phone: +49 (911) 895-3200
http://www.sitrain.com/
SIMATIC NET training center
For courses specifically on products from SIMATIC NET, please contact:
SIEMENS AG
Siemens AG, A&D Informations- und Trainings-Center
Dynamostr. 4
D-68165 Mannheim
Phone: +49 (621) 4 56-23 77
Fax: +49 (621) 4 56-32 68
SINAUT MD720-3
C79000-G8900-C210
5
 

Plik z chomika:

Inne pliki z tego folderu:

Inne foldery tego chomika:

Zgłoś jeśli naruszono regulamin