RECLI00GBB.PDF

SPECIFIC VEHICLE ALARM FITTING INSTRUCTIONS REV. 00

www.cobra.it

RENAULT

MOD. CLIO 1.2 RT YEAR. 00 ﬁ

PETROL

DIESEL

MAKE

ALARM/SIREN

POSITION

Position the compact alarms and the sirens on the support of the battery, in the

engine compartment. Pass the cables using the original rubber of the bonnet opener

cable.

CENTRAL UNIT POSITION

Position the modular systems and the modules under the dashboard, driver’s side.

POWER SUPPLY

+ 30: connect to the 4 mm 2 WHITE wire located at the entrance of the fuse box.

- 31: connect with a cable terminal directly to the car body.

IGNITION WIRE

+ 15/54: connect to the YELLOW wire at the position nr. 5, in the connector marked

“L”, on the superior part of the central located under the dashboard, driver’s side.

DIRECTION INDICATORS

Connect to the WHITE/BROWN wire at the position nr. 4 and to the

ORANGE/BROWN wire at the position nr. 5 in the connector marked “M”, on the

superior part of the central placed under the dashboard, driver’s side.

ELECTRIC WINDOWS

Mixed control signals

Front window, driver’s side:

cut the VIOLET wire directly in the wiring harness coming out of the serial push

botton, inside the driver’s side door.

Front window, passenger’s side:

cut the WHITE/ORANGE wire (positive control) and the WHITE/ORANGE wire

(negative control) located in the wiring harness coming out of the driver’s side door.

CENTRAL DOORS LOCKING

Negative control signal

Connect to the GREY wire at the position nr. 22 (unlock) and to the PINK wire at the

position nr. 7 (lock) located in the wiring harness coming out of the 26 way yellow

connector placed on the relay holder central, under the dashboard, driver’s side.

IMMOBILISATION POINT 1

Fuel pump

Cut the 1 mm 2 LIGHT BROWN wire located in the wiring harness coming out of the

black connector, behind the right lateral bulkhead, passenger’s side.

IMMOBILISATION POINT 2

Inertial switch

Cut the LIGHT BROWN wire located in the wiring harness coming out of the

connector of the inertial switch placed on the support of the shock absorber, driver’s

side.

STARTER

+50: Cut the ORANGE wire located in the wiring harness coming out of the connector

of the ignition key.

BONNET SWITCH

Install an additional switch on the front headlamp support plate.

DOORS SWITCH

Connect to the GREEN wire at the position nr. 13 in the connector of the central doors

locking unit.

BOOT SWITCH

Connect to the GREY wire directly on the coming out of the boot lamp.

Note: This information is not binding, therefore it must be considered only an example for installation purposes that must be executed

as per the instructions given on the product installation manual.

recli00gbb.doc

Plik z chomika:

Inne pliki z tego folderu:

Inne foldery tego chomika: