MESPR04GBDT.PDF

SPECIFIC VEHICLE ALARM FITTING INSTRUCTIONS REV. 00

www.cobra.it

MAKE MERCEDES MOD. SPRINTER* YEAR. 04 ﬁ

PETROL

DIESEL

* Models with original equipment keyless entry system.

ALARM/SIREN

POSITION

Position the compact alarms and the sirens on the wheelhouse, passenger’s side.

CENTRAL UNIT POSITION Position the modular systems and the modules under the passenger’s side dashboard, on the

side of the black central doors locking unit.

POWER SUPPLY

+30: connect to the 1,5 mm 2 RED/WHITE wire located in the wiring harness coming out of the

15 Amp fuse of the fuse box placed under the passenger’s side glove compartment.

-31: connect to one of the ground shuntings located behind the fuse box, under the

passenger’s side glove compartment.

IGNITION WIRE

+15/54: connect to the 2 mm 2 RED/GREEN wire, at the position nr.2, of the black connector

located inside the black connectors protection bag placed under the passenger’s side glove

compartment.

DIRECTION INDICATORS

Connect to the BLACK/WHITE and BLACK/GREEN wires located in the wiring harness coming

out of the lights switch connector.

ELECTRIC WINDOWS

Negative control signal

Front window, driver’s side:

Cut the BLACK/BLUE wire with WHITE references.

Front window, passenger’s side:

Cut the BLACK/YELLOW wire with WHITE references.

These connections must be done in the wiring harnesses coming out of the respective control

switches.

ACTIVAT./DEACTIVATION Connections antitheft/vehicle

CONTROLS

Position

pos.nr.6, in the grey connector

pos.nr.2, in the violet connector

car body

wiring harness coming out of the lights switch

car body

The grey and violet connectors are located in the central placed under the driver’s side seat.

Note: when the alarm system is going on, it is necessary to wait the end of the alarm cycle.

Vehicle

WHITE/RED

BLUE/RED

Ground

BLACK/WHITE

Ground

IMMOBILISATION POINT

Gasoil pump

Cut the RED/BLACK wire located in the wiring harness coming out of the fuse nr. 24, in the

fuse box positioned on the left, under the driver’s side seat.

STARTER

+ 50: Cut the wire marked “A 122” located in the wiring harness coming out of the connector of

the ignition key.

BONNET SWITCH

Install an additional switch on the front headlamp support plate, driver’s side.

DOORS SWITCH

Connect to the 1 mm 2 BROWN/WHITE wire located in the wiring harness that goes along the

side of the central doors locking unit placed under the passenger’s side glove compartment.

BOOT SWITCH AND

LOADING COMPARTMENT

Connect to the 1 mm 2 BROWN /BLUE wire located in the wiring harness that goes along the

side of the central doors locking unit placed under the passenger’s side glove compartment.

Note: This information is not binding, therefore it must be considered only an example for installation purposes that must be executed

as per the instructions given on the product installation manual.

mespr04gbdt.doc

3800

GREY/BLACK

YELLOW/BLACK

VIOLET/WHITE

ORANGE

VIOLET

ORANGE/WHITE

Plik z chomika:

Inne pliki z tego folderu:

Inne foldery tego chomika: