JECHE03GBDT.PDF

SPECIFIC VEHICLE ALARM FITTING INSTRUCTIONS REV. 00

www.cobra.it

MAKE

JEEP

MOD. CHEROKEE* YEAR 03 ﬁ

PETROL

DIESEL

* Models with original equipment keyless entry system

ALARM/SIREN

POSITION

Position the compact alarms and the sirens behind the air filter box, passenger’s side.

CENTRAL UNIT POSITION

Position the modular sistems and the modules under the dashboard, driver’s side.

POWER SUPPLY

+30: connect to the PINK wire located in the vertical bundle of cables, on the left of the steering column.

-31: connect to an original ground terminal located behind the left lateral bulkhead.

IGNITION WIRE

+15/54: connect to the BLUE/PINK wire located in the vertical bundle of cables, on the left of the steering

column.

DIRECTION INDICATORS

Connect to the GREEN/RED and BROWN/RED wires, in the 60 way grey connector, behind the driver’s side

sill cover.

ELECTRIC WINDOWS

Positive control signal

Front window, driver’s side:

cut the 1,5 mm 2 LIGHT BLUE wire in the 14 way grey connector in the push-button panel in the central tunnel.

Front window, passenger’s side:

cut the 1,5 mm 2 BROWN wire in the 14 way grey connector in the push-button panel in the central tunnel.

Rear window, driver’s side:

cut the 1,5 mm 2 BLUE/WHITE wire in the 14 way grey connector in the push-button panel in the central tunnel.

Rear window, passenger’s side:

cut the 1,5 mm 2 GREY/BLACK wire in the 14 way grey connector in the push-button panel in the central tunnel.

ACTIVAT./DEACTIVATION

Connections antitheft/vehicle

CONTROLS

Position

Horizontal wiring harness on the left of the steering column

60 way grey connector behind driver’s side sill cover

car body

Refer to the A diagram in the dedicated installation manual inside the kit of the antitheft.

Vehicle

PINK/BLACK

ORANGE/BLACK

BROWN/RED

ground

IMMOBILISATION POINT

Ignition locking

Cut the YELLOW/RED wire in the wiring harness coming out of the 2 way green connector located on the clutch

pedal.

STARTER

+50: Cut the YELLOW wire in the wiring harness of the ignition key.

BONNET SWITCH

Connect to the BROWN/LIGHT BROWN wire at the position nr.6, in the 26 way grey connector, on the back of

the central located on the left of the steering column near the door.

DOORS SWITCH

Connect to the LIGHT BROWN wire (ant. left) at the position nr.4 and to the LIGHT BROWN/WHITE wire (ant.

right) and (post.left and right) at the position nr.5, in the 26 way grey connector, on the back of the central

located on the left of the steering column.

NOTE: separate the lines with diodes.

BOOT SWITCH

Connect to the LIGHT BROWN/BLACK wire at the position nr.7, in the 26 way grey connector, on the back of

the central located on the left of the steering column, near the door.

Note: This information is not binding, therefore it must be considered only an example for installation purposes that must be executed

as per the instructions given on the product installation manual.

jeche03gbdt.doc

Art. 3800

YELLOW/BLACK

GREY/BLACK

VIOLET

ORANGE

VIOLET/WHITE

ORANGE/WHITE

Plik z chomika:

Inne pliki z tego folderu:

Inne foldery tego chomika: